TYPE 10 D52LC Fixed Inductors for Surface Mounting Meeting Your Needs TYPE D52LC Frequency Range: 0.1 - 1MHz Inductance Range: 1.2 - 100H * : D52LC: 2.0max. / D53LC: 3.0max. Features * * * * Unit: mm Recommended patterns: Low profile (2.0mm max.) Magnetically shielded Available on tape and reel for auto-insertion Suitable for reflow soldering Unit: mm STANDARD PARTS SELECTION GUIDE (1) Inductance is measured by LCR-meter 4284A (HP) or equivalent. (2) DC Resistance is measured by Digital Multimeter TR6871 (Advantest) or equivalent. (3) Maximum allowable DC current is that which causes a 30% inductance reduction from the initial value, or coil temperature to rise by 40C, whichever is smaller. (Reference ambient temperature 20C). TYPE D52LC Rated DC Current (3) L/L=30% T=40C ( A ) max. ( A ) max. 2.15 2.29 TOKO Part Number A914BYW-1R2M=P3 Lo (H) 1.2 A914BYW-2R2M=P3 2.2 20 100 59 1.63 1.64 A914BYW-3R5M=P3 3.5 20 100 73 1.34 1.45 A914BYW-4R7M=P3 4.7 20 100 87 1.14 1.22 A914BYW-6R8M=P3 6.8 20 100 105 0.95 1.10 A914BYW-100M=P3 10 20 100 150 0.76 0.87 A914BYW-150M=P3 15 20 100 210 0.63 0.72 A914BYW-220M=P3 22 20 100 275 0.56 0.66 A914BYW-330M=P3 33 20 100 455 0.44 0.48 A914BYW-470M=P3 47 20 100 730 0.36 0.35 A914BYW-680M=P3 68 20 100 935 0.30 0.33 A914BY-101M=P3 100 20 100 1500 0.23 0.24 Inductance Test Freq. Tolerance (kHz) % 100 20 DC Resistance Spec ( m ) max. 44 Note: =P3 is added to each part number to indicate tape and reel packaging. Please read PRECAUTIONS and NOTES sections of this catalog for safe operation. This catalog contains consumer grade specifications only. Detailed technical specifications are available upon request. 1.800.PIK.TOKO www.tokoam.com 1.847.297.0070 R-LOG0102A