Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
SERIES 71
.5-.75" Diameter, 1/4 Amp
FEATURES
Performance and Value Leader
Molded-In Position Terminals
Choice of Shaft/Bushing Diameters
30° and 36° Angles of Throw
• Military Qualified MIL-DTL-3786/39
0.125" Diameter Shaft–Styles A and MA (and sealed versions) Rear Views–Style A, B, MA, MB
(and sealed versions)
36° Angle of Throw
Terminal Detail
Note: Common location for a single pole per
deck switch. For common location on
multipole switches see circuit diagrams.
DIMENSIONS: Standard and Military In inches (and millimeters)
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
30° Angle of Throw
All dimensions not shown
are the same as above.
0.250" Diameter Shaft–Styles B and MB (and sealed versions)
Approx. Approx.
No. of Dimension Dimension Weight No. of Dimension Dimension Weight
Decks A B Grams Decks A B Grams
1 .761 (19,33) .031 (0,79) 14 7 2.349 (59,66) .312 (7,92) 26
2 .979 (24,87) .031 (0,79) 16 8 2.567 (65,20) .312 (7,92) 28
3 1.197 (30,40) .031 (0,79) 18 9 2.785 (70,74) .312 (7,92) 30
4 1.415 (35,94) .031 (0,79) 20 10 3.003 (76,28) .312 (7,92) 32
5 1.633 (41,48) .031 (0,79) 22 11 3.221 (81,81) .312 (7,92) 34
6 2.131 (54,13) .312 (7,92) 24 12 3.439 (87,35) .312 (7,92) 36
Angle C is 15° in 12 position switches and 36 ° in 10 position switches.
Grayhill part number and date code marked on detent cover label. Customer part
number marked on request. Military part number marked when required.
1/4 32UNEF-2A THREAD
.125 + .001
–.002 DIA.
(3,18 + 0,25
–0,05)
.312 ± .020
(7,92 ± 0,51)
.250 ± .020
(6,35 ± 0,51)
.375 ± .020
(9,53 ± 0,51)
.562
± .015
(14,27
± 0,38)
DIM. A ± .046 (1,17)
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
.687 ± .015
(17,45 ± 0,38)
DIA.
.094 ± .010
(2,39 ± 0,25)
.203 ± .005
(5,16 ± 0,13)
OF POSITION NO. 1
OF BUSHING FLATS
C
SEE
CHART
C
L
C
L
GRAYHILL
12
1
3
4
6
7
8
9
10
11
.500 ± .015
(12,7 ± 0,38)
DIA.
.750 ± .020
(19,05 ± 0,51)
OVER TERMINALS
SEE DETAIL
SEE NOTE
2
5
.312 ± .020
(7,92 ± 0,51)
.250 + .001
–.002 DIA.
(6,36 + 0,25
–0,05)
.250 ± .020
(6,35 ± 0,51)
.375 ± .020
(9,53 ± 0,51)
BUSHING KEYWAY
.066 ± .002 (1,68 ± 0,05) WIDE BY
.036 ± .003 (0,91 ± 0,08) DEEP
FROM A .375 (9,53) DIA.
3/8-32UNEF-2A THREAD
.687 ± .015
(17,45 ± 0,38)
DIA.
C
SEE
CHART
C
L OF POSITION NO. 1
C
L OF BUSHING KEYWAY
.219 ± .004
(5,56 ± 0,10)
GRAYHILL
10
1
2
3
4
5
6
7
8
9
.500 ± .015
(12,7 ± 0,38)
DIA.
.750 ± .020
(19,05 ± 0,51)
OVER TERMINALS
SEE DETAIL
SEE NOTE
.034 ± .003
(0,86 ± 0,08) .068 ± .005
(1,73 ± 0,13)
Rotary
2
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Mulit-Deck Rotary Switches
DIMENSIONS: Metric All dimensions are in millimeters
36° Angle of Throw
Terminal Detail
Rear Views4mm Diameter Shaft–Style E and ES
Approx.
No. of Dim. Dim. Weight
Decks A B Grams
1 19,33 0,79 12
2 24,87 0,79 14
3 30,40 0,79 16
4 35,94 0,79 18
5 41,48 0,79 20
6 54,13 7,92 22
7 59,66 7,92 24
8 65,20 7,92 26
9 70,74 7,92 28
10 76,28 7,92 30
11 81,81 7,92 32
12 87,35 7,92 34
Angle C is 15° in 12 position switches and
36° in 10 position switches.
Ø 17,45
± 0,4
OF POSITION NO. 1
OF BUSHING FLATS
C
SEE
CHART
6,00 + 0,00
–0,08
C
L
C
L
M7,0 X 0,75 THREAD
14,27
± 0,4
DIM. A ± 1,2
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
Ø 4,00 ± 0,03
25,00 ± 0,5
8,00
± 0,3
GRAYHILL
12
1
3
4
6
7
8
9
10
11
Ø 12,70
± 0,4
19,05 ± 0,5
OVER TERMINALS
SEE DETAIL
SEE NOTE
2
5
30° Angle of Throw
0,86 ± 0,07
1,73 ± 0,13
GRAYHILL
10
1
2
3
4
5
6
7
8
9
Ø 12,70
± 0,4
19,05 ± 0,5
OVER TERMINALS
SEE DETAIL
SEE NOTE
Note: Common location for a single pole per
deck switch. For common location on
multipole switches see circuit diagrams.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
30° Angle
of Throw
36° Angle
of Throw
Switch is Viewed From Shaft End and Shown in Position No. 1.
Note: All common terminals are located above base terminals as shown.
CIRCUIT DIAGRAMS: Standard, Military and Metric
ONE POLE TWO POLE THREE POLE FOUR POLE FIVE OR SIX POLE
ONE POLE TWO POLE
C1
C2
C3
10
11
12
1
2
3
4
5
6
7
8
9
C
L
C4
C1
C2
C3
10 11
12
1
2
3
4
5
6
7
8
9
C
L
C1
C2
C3
C4
C5
C610
11
12
1
2
3
4
5
6
7
8
9
C
L
C
L
C1
C2
10
11
12
1
2
3
4
5
6
7
8
9
4
32
1
10
9
8
5
6
7
C1
C
LOF
BUSHING
KEYWAY
4
32
1
10
9
8
5
6
7
C1
C2
C
L
C1
10
11
12
1
2
3
4
5
6
7
8
9
C
LOF
BUSHING
KEYWAY
Rotary
3
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
SERIES 71
.5-.75" Diameter, 1/4 Amp, PC Mount
FEATURES
Terminals From One Side
Minimum Board Footprint
Choice of Shaft/Bushing Diameters
30° and 36° Angles of Throw
• Military Qualified MIL-DTL-3786/39
See pages F-39 through F-44 for specifications,
accessories and ordering information.
36° Angle of Throw
Note: Common location for a single pole per
deck switch. For common location on
two pole switches see circuit diagrams.
Dimension A Dimension A Dimension B Approx. Dimension A Dimension B Approx.
No. of Standard Military All Weight No. of Standard Standard Weight
Decks Style Style Styles Grams Decks Style Style Grams
1 .761 (19,33) .761 (19,33) .031 (0,79) 12 7 2.349 (59,66) .312 (7,92) 24
2 .979 (24,87) .979 (24,87) .031 (0,79) 14 8 2.567 (65,20) .312 (7,92) 26
3 1.197 (30,40) 1.415 (35,94) .031 (0,79) 16* 9 2.785 (70,74) .312 (7,92) 28
4 1.415 (35,94) 1.633 (41,49) .031 (0,79) 18* 10 3.003 (76,28) .312 (7,92) 30
5 1.633 (41,48) N.A. .031 (0,79) 20 11 3.221 (81,81) .312 (7,92) 32
6 2.131 (54,13) N.A. .312 (7,92) 22 12 3.439 (87,35) .312 (7,92) 34
All dimensions not shown
are the same as above.
DIMENSIONS: Standard and Military In inches (and millimeters)
0.125" Diameter Shaft: Styles AF and MAF (and sealed versions) Rear Views: Styles AF, BF, MAF, MBF
(and sealed versions)
Military Qualified style MAF
includes a spacer deck between
decks 2 and 3. See dimension chart. 30° and 36° Angle of Throw may be
interposed on either shaft diameter.
30° Angle of Throw
0.250" Diameter Shaft: Styles BF and MBF (and sealed versions)
Military Qualified style MBF
includes a spacer deck between decks
2 and 3. See dimension chart.
Grayhill part number and date code marked on detent cover label. Customer part
number marked on request. Military part number marked when required.
.687 ± .015
(17,45 ± 0,38)
DIA.
.020 ± .003
(0,51 ± 0,08)
TYP.
.203 ± .005
(5,16 ± 0,13)
TERMINAL
NO. 1
.094 ± .010
(2,39 ± 0,25)
C
SEE
CHART
C
L
SHAFT
SHOWN
IN POSITION
ONE
OF
BUSHING
FLATS
C
L
.875 (30°)
.725 (36°) ± .015
(22,23, 18,42
± 0,38)
.125 – .002 + .001
(3,18 – 0,05 + 0,03)
DIA.
1/4-32 UNEF-2A
THREAD
.250 ± .020
(6,35 ± 0,51)
.375 ± .020
(9,53 ± 0,51)
.312 ± .020
(7,92 ± 0,51)
DIM. A ± .046 (1,17)
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
.562
± .015
(14,27
± 0,38)
SEE NOTE
BELOW
C
L
C
L
C
L
.110 ± .010
(2,79 ± 0,25)
TYP.
.412 ± .010
(10,46 ± 0,25)
TYP.
.015
± .002
(0,38
± 0,05)
1
2
3
4
5
6
7
8
9
10
GRAYHILL
.500 ± .015
(12,7 ± 0,38)
DIA.
.156 ± .010
(3,96 ± 0,25)
TYP.
SEE
NOTE
.368 (9,35)
REF.
.125 ± .010
(3,18 ± 0,25)
TYP.
.037 ± .005
(0,94 ± 0,13)
TYP.
.075 ± .005
(1,91 ± 0,13)
TYP. C
L
C
L
1
2
3
4
5
6
7
8
9
10
11
12
.500 ± .015
(12,7 ± 0,38)
DIA.
.368 (9,35)
REF.
.125 ± .010
(3,18 ± 0,25)
TYP.
.156 ± .010
(3,96 ± 0,25)
TYP.
.037 ± .005
(0,94 ± 0,13)
TYP.
.075 ± .005
(1,91 ± 0,13)
TYP. C
L
C
L
SEE
NOTE
GRAYHILL
C
SEE
CHART
.219 ± .004
(5,56 ± 0,10)
.687 ± .015
(17,45 ± 0,38)
DIA.
.875 (30°)
.725 (36°) ± .015
(22,23, 18,42
± 0,38) SHAFT
SHOWN
IN POSITION
ONE
OF
BUSHING
KEYWAY
C
L
3/8 32UNEF-2A
THREAD
.250 – .002 + .001
(6,35 – 0,05 + 0,03)
DIA.
.250 ± .020
(6,35 ± 0,51)
.375 ± .020
(9,53 ± 0,51)
.312 ± .020
(7,92 ± 0,51)
BUSHING KEYWAY .066 ± .002
(1,68 ± 0,05) WIDE BY .036 ± .003
(0,91 ± 0,08) DEEP FROM A
.375 (9,53) DIA.
Angle C is 15° in 12 position switches and 18° in 10 position switches.
*Military style switch is 18 grams for 3 decks and 20 grams for 4 decks.
Rotary
4
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
Ø 17,45
± 0,4
22,23 ± 0,4
0,51 ± 0,08 TYP.
6,00 + 0,00 –0,08
TERMINAL
NO. 1
OF
BUSHING
FLATS
C
L
Ø 4,00 ± 0,03
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
DIM. A ± 1,1725,00 ± 0,51
8,00 ± 0,3
14,27
± 0,38
M7 X 0,75
THREAD
SEE NOTE
BELOW
C
L
C
L
C
L
2,79 ± 0,25
TYP.
10,46 ± 0,25
.0,38
± 0,03
TYP.
DIMENSIONS: Metric All dimensions are in millimeters
4mm Diameter Shaft: Style EF and ESF Rear Views
30° Angle of Throw
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
36° Angle of Throw
Approx. Approx.
No. of Dim. Dim. Weight No. of Dim. Dim. Weight
Decks A B Grams Decks A B Grams
1 19,33 0,79 12 7 59,66 7,92 24
2 24,87 0,79 14 8 65,20 7,92 26
3 30,40 0,79 16 9 70,74 7,92 28
4 35,94 0,79 18 10 76,28 7,92 30
5 41,48 0,79 20 11 81,81 7,92 32
6 54,13 7,92 22 12 87,35 7,92 34
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
Note: Common location for a single pole per
deck switch. For common location on
two pole switches see circuit diagrams.
1
2
3
4
5
6
7
8
9
10
11
12
Ø 12,7
± 0,38
9,35
REF.
3,18 ± 0,25
TYP.
3,96 ± 0,25
TYP.
0,94 ± 0,13
TYP.
1,91 ± 0,13
TYP.
C
L
C
L
SEE
NOTE
GRAYHILL
C
L C
L
7,62 ± 0,25
GRAYHILL
Ø 12,7
± 0,38
3,96 ± 0,25
TYP.
SEE
NOTE
9,35
REF.
3,18 ± 0,25
TYP.
0,94 ± 0,13
TYP.
1,91 ± 0,13
TYP.
C
L
C
L
C
L C
L
7,62 ± 0,25
18,42
± 0,04
1
2
3
4
5
6
7
8
9
10
CIRCUIT DIAGRAMS: Standard, Military and Metric PC Mount
ONE POLE
TWO POLE
ONE POLE
TWO POLE
30° Angle
of Throw
36° Angle
of Throw
Circuit is Viewed From Shaft End and Shown in Position No. 1
10987 6 543 21
1112
C1
C2
C
L
10 9 8 7 6 5 43 1
1112
OF BUSHING
KEYWAY OR
FLATS
C
L
C1
2
10987654321
C1
OF BUSHING
KEYWAY OR
FLATS
C
L
10987654321
C1
C2
C
L
Rotary
5
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
SERIES 71: PC Board Pattern In inches (and millimeters)
Spacer decks can be supplied to facilitate PC board layouts of
three or more decks. A spacer deck does not have any
terminals and provides no switching function. Dimensionally, it
requires the same space as one normal switch deck. Spacer
deck can be placed at any location in the switch, per your
instructions. Switches which include spacer decks are procured
under a special part number.
Number of Poles Common Terminal
Per Deck Hole Location
1A
2 A and B
Shown for a two deck switch.
Bushing mount is recommended.
30° Angle of Throw 36° Angle of Throw
SERIES 71: PC MOUNT ACCESSORY
For printed circuit styles. Mounting bushing provides additional
support for the front end of the switch. Order separately by
appropriate part number. Rotary switch discount applies.
1/8" and 1/4" Diameter Shaft Styles
In inches (and millimeters)
Metric Mount Styles
In millimeters
All Styles Except 71BT
.110 (2,79 )TYP.
.110 TYP.
(2,79 )
SHAFT END
OF SWITCH
.075
(1,91)
TYP. .037 (0,94)
A
.300
(7,62)
TYP.
B
COMMON TERMINAL HOLE
LOCATION (SEE CHART)
.110 (2,79 )TYP.
.110 TYP.
(2,79 )
SHAFT END
OF SWITCH
.075
(1,91)
TYP. .037 (0,94)
A
.300
(7,62)
TYP.
B
COMMON TERMINAL HOLE
LOCATION (SEE CHART)
OF COMMON
FOR DECK ONE
C
L
0.030 ±.001
(0,76 ± 0,03)
.207 ±.005
(5,26 ± 0,13)
.500
±.002
(12,7
± 0,05)
C
L
.255 ±.002
(6,48 ± 0,05) DIA.
0.368 ± .003
(9,35 ± 0,08)
.130 ±.003
(3,30 ± 0,08)
WASHER IS
.032 (0,81) THICK
DIMENSIONS APPLY TO BOTH WASHERS.
FOR USE WITH
STYLE AF
PART 71C2054
FOR USE WITH
STYLE BF
PART 71C2053
.375 ± .002
(9,53 ± 0,05)
.687
(17,45)
DIA.
C
L
Ø 17.45
±0.08
9.35
±0.08
THICKNESS
0.81 ±0.05
12.7
±0.05
0.76 ±0.03
FOR USE WITH
STYLE EF
PART 71C2111
Rotary
6
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
No. of Dimension Dimension
Decks A B
1 0.795 (20,19) 0.031 (0,79)
2 1.040 (26,42) 0.053 (1,35)
3 1.285 (32,64) 0.076 (1,93)
4 1.530 (38,86) 0.098 (2,49)
5 1.775 (45,09) 0.120 (3,05)
DIMENSIONS: Standard and Military In inches (and millimeters)
Shaft flat is opposite point of contact for pole
number one. Shaft is shown here in position 1.
Rear View
Style BT
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
CIRCUIT DIAGRAMS
Circuit is Viewed From Shaft End
and Shown in Position No. 1
TWO POLE
ONE POLE
STYLE 71BT: PC Board Pattern
Including Integral Front Plate
Standoffs
36° Angle of Throw
.037 ± .005
(0,94 ± 0,13)
.075 ± .005
(1,91 ± 0,13) TYP.
.368 ± .005
(9,35 ± 0,13)
.125 ± .010
(3,18 ± 0,25)
.156 ± .010
(3,96 ± 0,25)
C
L C
L
110
10987654321
C1
OF BUSHING
KEYWAY OR
FLATS
C
L
10987654321
C1
C2
C
L
.110 (2,79) 5 PLS.
OF COMMON
TERMINAL
OF
STAND-
OFFS
POLE
NO. 1
.220 (5,59)
.440 (11,18)
.300 (7,62)
.0375
(0,95)
.075 (1,91)
9 PLS.
C
L
OF
SWITCH
.029 (0,74) Ø MIN.
HOLE 33 PLS.
.250
(6,35)
.428
(10,87)
.500
(12,7)
.036 (0,91)
Ø MIN. HOLE
2 PLS.
C
L
C
L
SHAFT END OF SWITCH
SERIES 71
.5-.75" Diameter, 1/4 Amp,
Process Sealed
.725 ± .015
(18,42 ± 0,38)
Ø .687 ± .015
(17,45 ± 0,38)
.310 ± .010
(7,87 ± 0,25)
.219 ± .004
(5,56 ± 0,10)
COMMON TERMINAL
TERMINAL NO. 1
.030 ± .002
(0,76 ± 0,05)
TYP.
.020 ± .003
(0,51 ± 0,08)
TYP.
.250 + .001
–.002 DIA.
(6,36 + 0,25
–0,05)
.275 ± .020
(6,99 ± 0,51)
.250 ± .020
(6,35 ± 0,51)
.375 ± .020
(9,53 ± 0,51)
DIM. A
± .046(1,17)
DIM. B
REF.
.562 ± .015
(14,27 ± 0,38)
.100 ± .010
(2,5 ± 0,25)
2 PLS.
C
L
C
L
C
L
.015 ± .002
(0,38 ± 0,05)
TYP.
.110 ± .010
(2,79 ± 0,25)
TYP.
.015 ± .002
(0,38 ± 0,05)
.449 ± .008
(11,4 ± 0,20)
3/8-32
UNEF-2A
THREAD
.428 ± .008
(10,87 ± 0,20)
18°
FEATURES
No Hand Soldering Required
Sealed to Resist Intrusion by Flux,
Solder and Cleaning Solutions
.75" Diameter
250 mA for 20,000 Cycles
36°, 1 or 2 Poles, Up to 5 Decks
10 Positions, Continuous Rotation,
or 2-9 Positions With Fixed Stops
Rotary
7
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
SERIES 71
0.5 to 0.75" Diameter, 1/4 Amp,
Concentric Shaft
FEATURES
Two Switches in the Panel Space
of a Single Shaft Rotary
CIRCUIT DIAGRAMS: Solder Lug Terminals
DIMENSIONS In inches (and millimeters)
Solder Lug Terminals: Style C Rear Views
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
Terminal Detail
30° Angle of Throw
Switch is Viewed From Shaft End and Shown in Position No. 1.
Note: All common terminals are located above base terminals as shown.
30° Angle
of Throw
ONE POLE TWO POLE THREE POLE FOUR POLE FIVE OR SIX POLE
36° Angle
of Throw
ONE POLE TWO POLE
Approx.
Weight
Sec. A Sec. B Dimension A Dimension B Grams
1 1 1.415 (35,94) .032 (0,81) 24
2 1 1.633 (41,49) .032 (0,81) 26
3 1 2.131 (54,13) .312 (7,92) 28
1 2 1.633 (41,49) .032 (0,81) 26
2 2 2.131 (54,13) .312 (7,92) 28
3 2 2.349 (59,66) .312 (7,92) 30
1 3 2.131 (54,13) .312 (7,92) 28
2 3 2.349 (59,66) .312 (7,92) 30
3 3 2.567 (65,20) .312 (7,92) 32
Angle C is 15° in 12 position switches and 36 ° in 10 position switches.
No. of Decks
Note: Common location for a single pole per
deck switch. For common location on
multipole switches see circuit diagrams.
36° Angle of Throw
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
C
SEE
CHART
OF POSITION NO. 1
OF BUSHING KEYWAY
C
L
C
L
.687 ± .015
(17,45 ± 0,38)
DIA.
C
L
.094 ± .010
(2,39 ± 0,25)
.219 ± .004
(5,56 ± 0,10)
.562
± .015
(14,27
± 0,38)
DIM. A ± .046 (1,17)
DIM. B REF.
STUD PROJECTION
3/8-32UNEF-2A
THREAD
.125 + .001
–.002 DIA.
(3,18 + 0,25
–0,05)
.312 ± .020
(7,92 ± 0,51)
SECTION
A
SECTION
B
CONTROLLED
BY .250 (6,35)
DIA. SHAFT
CONTROLLED
BY .125 (3,18)
DIA. SHAFT
.250 + .001
–.002
(6,35 + 0,03
–0,05)
DIA.
.250 ± .020
(6,35 ± 0,05)
.375 ± .020
(9,53 ± 0,05)
BUSHING KEYWAY
.066 ± .002 (1,68 ± 0,05) WIDE BY
.036 ± .003 (0,91 ± 0,08) DEEP
FROM A .375 (9,53) DIA.
GRAYHILL
12
1
3
4
6
7
8
9
10
11
.500 ± .015
(12,7 ± 0,38)
DIA.
.750 ± .020
(19,05 ± 0,51)
OVER TERMINALS
SEE NOTE
2
5
SEE
DETAIL
GRAYHILL
10
1
2
3
4
5
6
7
8
9
.500 ± .015
(12,7 ± 0,38)
DIA.
.750 ± .020
(19,05 ± 0,51)
OVER TERMINALS
SEE NOTE
SEE
DETAIL
.034 ± .003
(0,86 ± 0,08) .068 ± .005
(1,73 ± 0,13)
C1
10
11
12
1
2
3
4
5
6
7
8
9
C
LOF
BUSHING
KEYWAY
C
L
C1
C2
10
11
12
1
2
3
4
5
6
7
8
9
C1
C2
C3
10
11
12
1
2
3
4
5
6
7
8
9
C
L
C4
C1
C2
C3
10 11
12
1
2
3
4
5
6
7
8
9
C
L
C1
C2
C3
C4
C5
C610
11
12
1
2
3
4
5
6
7
8
9
C
L
4
32
1
10
9
8
5
6
7
C1
C2
C
L
4
32
1
10
9
8
5
6
7
C1
C
LOF
BUSHING
KEYWAY
ADD-A-POT SWITCHES
Contact Grayhill for Series 71 Concentric Add-A-Pot or Add-A-Switch type switches.
Rotary
8
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
Switch is Viewed From Shaft End and Shown in Position No. 1.
Note: All common terminals are located above base terminals as shown.
DIMENSIONS In inches (and millimeters)
PC Mount: Style CF
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
Approx.
Weight
Sec. A Sec. B Dimension A Dimension B Grams
1 1 1.415 (35,94) .032 (0,81) 24
2 1 1.633 (41,49) .032 (0,81) 26
3 1 2.131 (54,13) .312 (7,92) 28
1 2 1.633 (41,49) .032 (0,81) 26
2 2 2.131 (54,13) .312 (7,92) 28
3 2 2.349 (59,66) .312 (7,92) 30
1 3 2.131 (54,13) .312 (7,92) 28
2 3 2.349 (59,66) .312 (7,92) 30
3 3 2.567 (65,20) .312 (7,92) 32
No. of Decks
For additional dimensions and references
for shafts, flat orientation and bushing
keyway, see drawings for styles 71AF and
71BF.
CIRCUIT DIAGRAMS: PC Mount Terminals
ONE POLE TWO POLE ONE POLE TWO POLE
36° Angle of Throw
30° Angle of Throw
30° Angle of Throw
Rear Views
Note: Common location for a Single Pole Per
Deck Switch. For common location on
multipole switches see circuit diagrams.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
.020 ± .003
(0,51 ± 0,08)
TYP.
POSITION
NO. 1
.687 ± .015
(17,45 ± 0,38)
DIA.
.875 (30°)
.725 (36°) ± .015
(22,23, 18,42
± 0,38)
.562
± .015
(14,27
± 0,38)
DIM. A
DIM. B REF.
STUD PROJECTION
SECTION
A
SECTION
B
.125 + .001
–.002 DIA.
(3,18 + 0,25
–0,05)
.312 ± .020
(7,92 ± 0,51)
.250 + .001
–.002
(6,35 + 0,03
–0,05)
DIA.
.250 ± .020
(6,35 ± 0,05)
.375 ± .020
(9,53 ± 0,05)
SEE NOTE
BELOW
C
L
C
L
C
L
.110 ± .010
(2,79 ± 0,25)
TYP.
.412 ± .010
(10,46 ± 0,25)
TYP.
.015
± .002
(0,38
± 0,05)
C
L
.656
(16,66)
3/8-32 UNEF-2A
THREAD
COMMON
DECK 1
SECTION A
COMMON
DECK 1
SECTION B
SEE SOLDER LUG
VERSION FOR
SHAFT FLATS AND
DIMENSIONS
1
2
3
4
5
6
7
8
9
10
11
12
.500 ± .015
(12,7 ± 0,38)
DIA.
.368 (9,35)
REF.
.125 ± .010
(3,18 ± 0,25)
TYP.
.156 ± .010
(3,96 ± 0,25)
TYP.
.037 ± .005
(0,94 ± 0,13)
TYP.
.075 ± .005
(1,91 ± 0,13)
TYP. C
L
C
L
SEE
NOTE
GRAYHILL
1
2
3
4
5
6
7
8
9
10
GRAYHILL
.500 ± .015
(12,7 ± 0,38)
DIA.
.156 ± .010
(3,96 ± 0,25)
TYP.
SEE
NOTE
.368 (9,35)
REF.
.125 ± .010
(3,18 ± 0,25)
TYP.
.037 ± .005
(0,94 ± 0,13)
TYP.
.075 ± .005
(1,91 ± 0,13)
TYP. C
L
C
L
10 9 8 7 6 5 43 1
1112
OF BUSHING
KEYWAY OR
FLATS
C
L
C1
2
10987654321
C1
OF BUSHING
KEYWAY OR
FLATS
C
L
10987654321
C1
C2
C
L
10987 6 543 21
1112
C1
C2
C
L
36° Angle of Throw
Rotary
9
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
SPECIFICATIONS
Military Qualification MIL-DTL-3786/39
The military style of the Series 71 rotary switch
is qualified to MIL-DTL-3786/39. Complete
electrical rating information is listed on the
following page. The Series 71 rotary switch
qualification includes the 30° and the 36° angles
of throw, in .125" (3,18) and .250" (6,35)
diameter shafts, with solder lug terminals and
printed circuit terminals, in sealed and unsealed
style switches. Standard variations such as
shaft and/or bushing length, etc. that do not
affect the switch performance can also be
marked as qualified product. Contact Grayhill
for complete details.
Dimensionally the military style is the same as
the standard style with the exception of the PC
version of 3 or 4 decks; a spacer deck between
decks 2 and 3 adds another deck length to the
SPECIFICATIONS: Materials and Finishes
switch without increasing the number of operative
decks.
Another difference in the standard and military
styles is the mounting hardware. Ordered as
options with a standard style switch these items
are included with the military style switch: non-
turn washer with solder lug style and a non-turn
washer plus a mounting bushing washer with
the PC terminal style.
Complete specification drawings are available
from Grayhill, Inc. for the standard military
qualified products. Military qualified Series 71
rotary switches may be ordered by the “M”
number listed in Military Specification Sheet/39
or by Grayhill part number. All qualified switches
will be marked to the specification.
Military Shaft and Panel Seal
A shaft and panel seal is available to provide
watertight mounting of the Series 71 standard
military style rotary switches. Sealing is
accomplished by an O-ring shaft seal and a
panel seal washer. Panel seal dimension
differences are shown in the dimensional
drawings. When the panel seal is compressed,
dimensions are approximately the same as an
unsealed switch. If the non-turn washer
supplied with the switch is used, it should not
be allowed to extend entirely through the
panel when mounting a sealed switch.
However, the bushing may be used as a non-
turn device instead. Switches are provided
with a double flat bushing in styles which
include the letter A and with a bushing which
has a keyway in the styles which include the
letter B.
Materials and Finishes
Standard Style
Cover: Diallyl per (MIL-M-14) ASTM-D-
5948 except for 71 BT (see bushing).
Base and Deck Separator: Diallyl per
(MIL-M-14) ASTM-D-5948
Rotor Mounting Plate: Thermoplastic
Bushing: Zinc casting, tin/zinc-plated.
Through Bolts and Nuts, Shaft and Rear
Support Plate, Stop Pins and Stop Arm
(All Others): Stainless steel
Shaft, Stop Plates, Stop Arm (71BT):
Reinforced thermoplastic
Detent Rotor: Reinforced thermoplastic for
71BT; phenolic per (MIL-M-14) ASTM-D-
5948 for all others
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy and beryllium
copper
Base Contacts, Common Plate and
Terminals: Brass, Gold plate .000005"
minimum over Silver plate .00005" over
nickel .00002".
Front Support Plate (71 BT only):
Tempered steel, tin/lead-plated.
Interdeck Seal (71 BT Only): Silicone
Extension: Brass, unplated
Mounting Hardware: One mounting nut and
one internal tooth lockwasher are supplied with
each switch. For switches with A in the style
description, the nut is .062" (1,57) thick by
.312" (7,92) across flats. For switches with B or
C in the style description, the nut is .094" (2,39)
thick by .562" (14,27) across flats. Nuts are
brass, tin/zinc-plated or stainless steel.
Materials and Finishes
Military Qualified
Cover, Base and Deck Separator: Diallyl per
(MIL-M-14) ASTM-D-5948
Rotor Mounting Plate: Thermoplastic
Bushing: Zinc casting, tin/zinc-plated
Through Bolts and Nuts, Shaft Extension,
Lockwashers, Shaft and Rear Support
Plate, Stop Pins and Stop Arm (All
Others): Stainless steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy and beryllium
copper
Base Contacts, Common Plate and Terminals:
Brass, gold plate .000005" minimum over silver
plate .00005" over Nickel .00002".
Detent Rotor: Phenolic per (MIL-M-14)
ASTM-D-5948
Mounting Hardware: One mounting nut and
one internal tooth lockwasher are supplied
with each Series 71 switch. For switches with
Style A in the description, the nut is .062"
(1,57) thick by .312" (7,92) across flats. For
switches with Style B or C in the description,
the nut is .094" (2,39) thick by .562" (14,27)
across flats. Nuts are brass, tin/zinc-plated or
stainless steel.
Additional Hardware: Each switch is
supplied with a non-turn washer to use if
desired. Additionally, each PC mount switch
is supplied with a mounting bushing washer
(see PC Mount Accessory). For switches
with Style A in the description, non-turn
washer is stainless steel; for switches with
Style B in the description, non-turn washer is
stainless steel. Mounting bushing washer
(PC Mount Accessory) is brass, tin/zinc-
plated.
Rotary
10
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
SPECIFICATIONS: Electrical Ratings, Others
Standard
Military
Electrical Ratings
General
Charts: Charts shown are for non-shorting
(break before make) contacts. Measurements
were made at 25°C and 68% relative humidity.
The load life curves show the number of
rotational cycles which can be expected for
the voltage, current and type of load. Thus,
for a standard style switch with a 300
milliampere 115 Vac resistive load, the
expected life is 15,000 cycles. Reducing the
load to 200 milliamperes increases the life to
25,000 cycles. Life limiting or failure criteria
are listed in the rating sections which follow.
Cycles: A cycle is a 360° rotation and a return
through all switch positions to the starting
position.
Voltage: As listed in charts.
CYCLES x 1000
CURRENT
MILLIAMPS
VOLTAGE 115 VAC
OR 30 VDC
RESISTIVE
10 25 50
400
300
200
100
500
600
CYCLES x 1000
CURRENT
MILLIAMPS
250
200
150
100
50
10 25 50
VOLTAGE 30 VDC
INDUCTIVE
(250 MILLIHENRIES)
CYCLES x 1000
CURRENT
MILLIAMPS
VOLTAGE 115 VAC
OR 30 VDC
RESISTIVE
10 25 50
400
300
200
100
500
600
800
700
CYCLES x 1000
CURRENT
MILLIAMPS
VOLTAGE 30 VDC
INDUCTIVE
(250 MILLIHENRIES)
10 25 50
200
150
100
50
250
Electrical Ratings
Standard Style
Curves are based on the following failure
criteria:
Contact Resistance: 50 milliohms maximum
(20 milliohms initially).
Insulation Resistance: 1,000 megohms
minimum between terminals and shaft. (50,000
megohms initially).
Voltage Breakdown: 500 Vac minimum
between mutually insulated parts.
Current Rating: These switches will carry 4
amperes with a maximum contact temperature
rise of 20°C. If the life limiting characteristics
are less critical than those shown above, if
elevated temperatures or reduced pressures
are involved, Grayhill can predict the switch
life for the application.
Meet the Following Requirements of MIL-
DTL-3786: Moisture Resistance: Medium and
High Shock; Vibration (10 to 2,000 cps);
Thermal Shock (-65°C to 85°C); Salt Spray,
Explosion; and Stop Strength (10 in-lb).
Electrical Ratings
Military Style
Curves are based on the following failure
criteria:
Qualified to the following MIL-DTL-3786/39
circuit values: (also see standard style
description.) The Series 71 has been tested to
meet the requirements of MIL-DTL-3786, Style
SR39, the majority of which are listed here. At
85°C approximately 68% relative humidity and
sea level pressure, the switches have been
tested to make and break the following loads,
as stated in MIL-DTL-3786/39: 125
milliamperes at 28 Vdc resistive; 75
milliamperes at 115 Vac resistive.
The switches have also been tested at reduced
barometric pressure (70,000 feet), 25°C at
approximately 68% relative humidity to make
and break the following loads as stated in MIL-
DTL-3786/39: 50 milliamperes, 28 Vdc resistive;
20 milliamperes, 115 Vac resistive. When
tested to the above loads at stated conditions,
the Series 71 switches meet the following life-
limiting criteria after 25,000 cycles of operation
in accordance with MIL-DTL-3786/39.
Contact Resistance: 50 milliohms maximum
after life.
Insulation Resistance: 1,000 megohms
minimum between terminals and shaft.
Dielectric Strength: 500 Vac (atmospheric
pressure) and 350 Vac (reduced pressure)
between mutually insulated parts.
The Series 71 also meets the requirements
of MIL-DTL-3786/39 for moisture resistance,
stop strength, rotational torque, vibration (10
through 2,000 cps), medium and high shock,
salt spray, explosion, thermal shock (-65°C
to 85°C) and terminal pull. When tested at sea
level, 25°C and 68% relative humidity with
failure criteria of 50 milliohms maximum
contact resistance and 500 Vac breakdown
voltage, these switches will make and break
250 milliamps at 28 Vdc inductive (250
millihenries) 500 milliamps at 28 Vdc resistive:
500 milliamps at 115 volts Vac, 60 hertz
resistive, for 10,000 cycles of operation.
Additional Characteristics
Standard and Military Styles
Rotational Torque: 4-32 ounce-inches, (28-
230 N•mm) depending on the number of
poles per deck and the number of decks.
Contacts: Shorting or non-shorting wiping
contacts with over 100 grams of contact
force.
Shaft Flat Orientation: Opposite first position
pole no. 1 (See Circuit Diagrams).
Terminals: Switches are provided with full
circle of terminals regardless of the number
of active positions.
Extended Studs: Switches of 6 or more
decks (or concentric switches of 4 or more)
have longer studs and extra stud nuts for
recommended double end mounting. Stud
hole size is 1/16" diameter for #0-80 NF-2A
thread.
Stop Strength: 10 pound-inches.
Mounting Bushing Strength: 10 pound-
inches.
Rotary
11
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
ADJUSTABLE STOPS
Set and Reset Stops to Limit Rotation
Form, Fit, Function Equivalent to Fixed Stop Styles
The adjustable stop Series 71 rotary switches allow you to
change the number of positions per pole. Simply remove
and relocate stop pins in the holes in the front of the switch.
The pins are held in place by a self adhesive sticker which
fits over the front plate.
This feature is available in the Series 71 single shaft
standard switches with either 1/8" or 1/4" diameter shafts
with either PC or solder lug terminals. It is not available in
military qualified or concentric shaft styles.
All dimensions, ratings and characteristics are the same as
the fixed stop equivalent. The chart shown here describes
the adjustable stop style substitutions for the fixed stop
styles. Although Series 71 is not an exact dimensional
equivalent of the fixed stop styles of Series 8 and 9, it most
nearly represents a functional substitution.
Fixed Stop Adjustable Stop
Style Substitution
08A 71AD
09A 71AD
71A 71AD
71AF 71ADF
71B 71BD
71BF 71BDF
71E 71ED
71EF 71EDF
SHAFT AND PANEL SEAL
The shaft is sealed by an O-ring inside the bushing. The
panel is sealed by an O-ring at the base of the bushing.
The seals do not alter the dimensions as shown in the
drawings when the switch is mounted.
The panel seal is silicone rubber. The shaft seal is an O-ring
per MIL-P-5516B.
STOP PIN HOLES
STOP PINS
STICKER
PANEL SEAL
SHAFT “O” RING
Rotary
12
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
C
L
1,57 ± 0,08
5,08
± 0,05
11,13
± 0,13
DIA.
90˚ ± 1˚
0,64
± 0,05
2,36
± 0,13
.015
(0,38)
RADIUS
MAX.
Multi-Deck Rotary Switches
1/8" and 1/4" Diameter Shaft Switches
The bushing of the Series 71 switch is designed so the switch will not turn
if the panel has been cut to fit the exact bushing shape. The bushing for
the 1/8" diameter shaft switch has a double flat; the 1/4" diameter shaft
switch has a keyway in the bushing. An alternate means of keeping the
switches from turning is to mount them with optional, non-turn washers.
Part number 50J1066 is made of Stainless Steel. It is supplied with
military switches with Style A in the description. When ordered for
standard product, a like number of switches must be ordered.
Part number 12C1087-1 is Brass, tin/zinc-plated and may be ordered for
standard product.
Part number SHH694-5 is Stainless Steel washer supplied with all military
style switches with Style B in the description.
PART NO. 12C1087-1
STANDARD
ACCESSORIES: Non-Turn Washers In inches (and millimeters)
PART NO. 50J1066
MILITARY AND STANDARD
FOR 1/8" DIAMETER SHAFT
PART NO. SHH694-5
MILITARY
FOR 1/4" DIAMETER SHAFT
4mm Diameter Shaft Switches
Non-Turn Washer
For styles E, ED, EF and EDF.
Mounting bushing washer provides non-turn
feature.
302 Stainless Steel.
Part No. 71 J1103. Contact Grayhill for price.
.250 ± .003
(6,35 ± 0,08)
.060 ± .001
(1,52 ± 0,25)
.400
± .005
DIA.
(10,16
± 0,13)90° ± 1°
.125
± .005
(3,16
± 0,13)
.015
(0,38)
RADIUS
MAX.
.025
± .001
(0,64
± 0,03)
C
L
.125 ± .010
(3,16 ± 0,25)
.005 ± .003
(0,38 ± 0,08)
RADIUS
.032 ± .002
(0,81 ± 0,05)
90˚ ± 1˚
.625 ± .010 DIA.
(15,89 ± 0,25)
.120 ± .003
(3,05 ± 0,08)
.437 + .010 –.000
(11,10 + 0,25 –0,00)
C
L
.375 ± .005
(9,53 ± 0,13)
.125 ± .002
(3,18 ± 0,05)
.625 ± .010 DIA.
(15,89 ± 0,25)
90° ± 1°
.125 ± .005
(3,16 ± 0,13)
.015 (0,38)
RADIUS
MAX.
.032 ± .005
(0,81 ± 0,13)
Rotary
13
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
01 thru 12 1 02 thru 123N or S
01 thru 08 2 02 thru 06 N or S
01 thru 05 3 02 thru 04 N or S
01 thru 04 4 02 or 03 N or S
01 thru 03 5502 N or S
01 or 02 6502 N or S
01 thru 12 1 02 thru 103N or S
01 thru 08 2 02 thru 05 N or S
01 thru 12 1 02 thru 123N or S
01 thru 08 2 02 thru 06 N or S
01 thru 12 1 02 thru 103N or S
01 thru 08 2 02 thru 05 N or S
01 thru 05 1 02 thru 103N or S
01 thru 05 2 02 thru 05 N or S
01 thru 0541 02 thru 123N or S
01 thru 0542 02 thru 06 N or S
01 thru 0543 02 thru 04 N or S
01 thru 0444 02 or 03 N or S
01 thru 0246 02 N or S
01 thru 0541 02 thru 103N or S
01 thru 0542 02 thru 05 N or S
01 thru 042,4 1 02 thru 123N or S
01 thru 042,4 2 02 thru 06 N or S
01 thru 042,4 1 02 thru 103N or S
01 thru 042,4 2 02 thru 05 N or S
01 thru 03 1 02 thru 123N or S
01 thru 03 2 02 thru 06 N or S
01 or 02 3 02 thru 04 N or S
01 4 02 or 03 N or S
01 5 02 N or S
01 6 02 N or S
01 thru 03 1 02 thru 103N or S
01 thru 03 2 02 thru 05 N or S
01 thru 03 1 02 thru 123N or S
01 thru 03 2 02 thru 06 N or S
01 thru 03 1 02 thru 103N or S
01 thru 03 2 02 thru 05 N or S
30°
36°
30°
36°
36°
30°
36°
30°
36°
30°
36°
30°
36°
AASAD
BBSBD
EESED
AF ASF ADF
BF BSF BDF
EF ESF EDF
BT —— ——
MA MAS ——
MB MBS ——
MAF MASF ——
MBF MBSF ——
C—
CF —— ——
A=1/8" Diameter Shaft
B=1/4" Diameter Shaft
E = Metric Mount Shaft & Bushing
D = Adjustable Stops (Adj. Stop)
S = Shaft and Panel Seal (S/P Seal)
Style Choices Angle of No. Of Poles Positions Shorting Or
Basic Style With S/P Seal Adj. Stop Throw Decks Per Deck Per Pole1Non-Shorting
CHOICES AND LIMITATIONS: Series 71
F = PC Mount Terminals
T = PC Mount Terminals and Process Sealed
Switching Decks & Bushing; no panel seal
M = Military
All switches without F or T have solder lugs
C = Concentric Shaft
2 Switches with same Style and Angle of
Throw, one behind the other.
Limits below apply to either switch section
(A or B).
1 For Adjustable Stop styles (with the letter D),
use AJ instead of number of positions when
ordering.
2 Military Qualified PC mount switches of 3 or
4 operative decks have an additional spacer
deck after deck 2. Use total decks to calculate
length; but use only the number of
operative
decks when creating the part number.
3 For 1-pole switches with maximum positions,
specify Fixed stop after last position or
Continuous rotation when ordering. (Note: 1 p,
71BT, 10 positions, is available only as
Continuous).
4 In addition to qualified types (Solder lug–5
decks; PC mount–4 decks), Grayhill can pro-
vide switches with additional decks in the
materials of the ‘M’ style. Contact Grayhill.
5 Switches in 30° throw with 5 or 6 poles per
deck are not available with adjustable stops.
Rotary
14
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
ORDERING INFORMATION: Single Shaft Switches
Series
Style*: Letter(s) from the Choices and Limitations chart
Angle of Throw: 30° or 36°
Number of Decks: As limited by Choices and Limitations chart
71A30–02–1–12N–C
Stop Arrangement: Use suffix only when ordering 1 pole with
maximum positions.
C = Continuous rotation; F = Stop between last and first positions
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: 02 to 12 per Choices chart.
For adjustable stop switches (D) use AJ here.
Poles Per Deck: As limited by the Choices chart
* All rotary switches that are required to have military designated markings and testing adhering to MIL-DTL-3786
are to be ordered by specifying the military part number identified on the appropriate slash sheet.
ORDERING INFORMATION: Concentric Shaft Switches
Entire Switch
Series and Style: 71C or 71CF
Angle of Throw: 30° or 36°. Both switch sections will be the same.
Switch Section A (Front Switch)
Number of Decks: 1 to 3, per Choices and Limitations chart
Poles Per Deck: As limited by the Choices and Limitations chart
Positions Per Pole: 02 to 12 per Choices and Limitations chart
Type of Contacts: N = Non-shorting; S = Shorting
Stop Arrangement: Use suffix only when ordering 1 pole with
maximum positions.
C = Continuous rotation; F = Stop between last and first positions
71C362110NC–3202S
Switch Section B (Rear Switch)
Stop Arrangement: Use suffix only when ordering 1 pole with
maximum positions.
C = Continuous rotation; F = Stop between last and first positions
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: 02 to 12 per Choices and Limitations chart.
Poles Per Deck: As limited by the Choices and Limitations chart
Number of Decks: 1 to 3, per Choices and Limitations chart
Available from your local Grayhill Distributor.
For prices and discounts, contact a Local Sales
Office, an authorized local Distributor or Grayhill.
Rotary
15