F-219 (Rev 29MAR19) SFMC-125-T2-L-D-P SFMC-117-T1-L-D SFMC-105-T2-L-D SFMC-112-03-L-D (1.27 mm) .050" SFMC SERIES FLEXIBLE PIN COUNT TIGER EYE SOCKETS TM SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SFMC Insulator Material: Black Liquid Crystal Polymer Contact Material: Tiger EyeTM = BeCu Tiger EyeTM LITE= Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: 2.9 A per pin (2 pins powered) Voltage Rating: 220 VAC/310 VDC Operating Temp Range: -55 C to +125 C Insertion Depth: (3.05 mm) .120" to (4.06 mm) .160" Normal Force: Standard= 132 g (1.29 N) avg. LIF= 90 g (0.88 N) avg. Max Cycles: 10,000 with 30 " (0.76 m) Au RoHS Compliant: Yes Board Mates: TFM Cable Mates: FMTP, FFMD* *Note: Standard FFMD callout will not mate with FLE, SFMC. Must use gold plated callouts. (See drawing on web.) Slotted SMT tails HIGH-SPEED CHANNEL PERFORMANCE 8 Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com SFMC 1 PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-26) (0.15 mm) .006" max (27-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) Available with optional pick & place pads G b p s LEAD STYLE NO. PINS PER ROW -01, -03 -L1, -L3 = Low Insertion Force Through-hole RECOGNITIONS LEAD STYLE A -03, -L3 ALSO AVAILABLE (1.91) .075 = Surface Mount (MOQ Required) = Low Insertion Force Surface Mount (1.27) .050 TYP -T1 = Surface Mount Tiger EyeTM LITE (1.27) .050 TYP (1.27) .050 -P OPTION (0.58) .023 (0.13) .005 TYP (4.57) .180 (0.51) .020 (10.00) .394 x (5.72) .225 = Through-hole Tiger EyeTM LITE -T2 (3.05) .120 A B (0.13) .005 TYP (4.19) .165 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM D OPTION -K = (4.00 mm) .157 DIA Polyimide film Pick & Place Pad (4 positions minimum) -P -L2 (0.41) .016 (1.27) .050 x No. of Positions + (0.38) .015 -L = 10 " (0.25 m) Gold on contact, Matte Tin on tail -02 B (0.51) -01, -L1, -T1 (3.05) .120 .020 FILE NO. E111594 Note: Some sizes, styles and options are non-standard, non-returnable. PLATING OPTION = Through-hole 02 thru 50 For complete scope of recognitions see www.samtec.com/quality * Other platings Any number of positions from 2 through 50 High-reliability Tiger EyeTM contacts All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. = Plastic Pick & Place Pad (5 positions minimum) -TR = Tape & Reel