POLY-FUSE® Resettable PTCs
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
Surface Mount > 0805L Series
The 0805L Series PTC provides surface mount overcurrent
protection for applications where space is at a premium
and resettable protection is desired.
Agency Approvals
Electrical Characteristics
Part Number Marking I hold
(A)
I trip
(A)
V max
(Vdc)
I max
(A)
P d typ.
(W)
Maximum Time
To Trip Resistance Agency
Approvals
Current
(A)
Time
(Sec.)
R min
(Ω)
R 1max
(Ω)
0805L005/30 f3 0.05 0.15 30 40 0.50 0.25 1.50 3.600 20.000
0805L010 A 0.10 0.30 15 100 0.5 0.50 1.50 1.000 6.000 X X
0805L010/24 J 0.10 0.30 24 100 0.5 0.50 1.50 1.500 6.000 X X
0805L020 C 0.20 0.50 9 10 0 0.5 8.00 0.02 0.650 3.500 X X
0805L035 E 0.35 0.75 6 100 0.5 8.00 0.10 0.250 1.200 X X
0805L0501F 0.50 1. 0 0 6100 0.5 8.00 0.10 0.150 0.850 X X
0805L075 G 0.75 1.50 6 40 0.6 8.00 0.20 0.090 0.350 X X
0805L100 N 1. 0 0 1.95 6 40 0.6 8.00 0.30 0.060 0.210 X X
0805L110 H 1. 10 2.00 6 100 0.8 8.00 0.10 0.050 0.160 X X
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state.
R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec.
Description
Features
Applications
RoHS compliant, lead-free
and halogen-free
Fast response to fault
currents
Compact design saves
board space
Low resistance
Low-profile
Compatible with high
temperature solders
USB peripherals
Disk drives
CD-ROMs
Plug and play protection
for motherboards and
peripherals
Mobile phones - battery
and port protection
Disk drives
PDAs / digital cameras
Game console port
protection
0805L Series RoHS
AGENCY AGENCY FILE NUMBER
E183209
R50119118
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
1 Part Number tested and complied with AEC-Q200.
Additional Information
Datasheet Samples
Resources Samples
POLY-FUSE® Resettable PTCs
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
Surface Mount > 0805L Series
Ambient Operation Temperature
-40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C
Part Number Hold Current (A)
0805L005/30 0.076 0.068 0.060 0.050 0.043 0.038 0.033 0.028 0.023
0805L010 0.14 0.12 0.11 0.10 0.08 0.07 0.06 0.05 0.03
0805L010/24 0.15 0.13 0.12 0.10 0.09 0.08 0.07 0.06 0.04
0805L020 0.28 0.25 0.23 0.20 0.17 0.14 0.12 0.10 0.07
0805L035 0.47 0.44 0.39 0.35 0.30 0.27 0.24 0.20 0.14
0805L050 0.68 0.62 0.55 0.50 0.40 0.37 0.33 0.29 0.23
0805L075 1. 0 0 0.90 0.79 0.75 0.63 0.57 0.53 0.41 0.34
0805L100 1.35 1.25 1. 10 1. 0 0 0.82 0.74 0.65 0.55 0.42
0805L110 1.45 1.35 1.20 1. 10 0.92 0.84 0.75 0.65 0.52
Temperature Rerating
Temperature Rerating Curve
-40 -30 -20 -10010 20 30 40 50 60 70 80
10%
30%
50%
70%
90%
110%
130%
150%
170%
Temperature (°C)
Percentage of Rated Current
Average Time Current Curves
The average time current curves and Temperature Rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
Note:
Typical Temperature rerating curve, refer to table for derating data
Notes: The temperature rerating data is only for reference, please contact Littelfuse technical support for detail temperature rerating information.
0.01
0.1
1
10
100
0.1 110 100
Current in Amperes
Time in Seconds
0.10A/24
0.10A
0.20A
0.35A
0.50A
0.75A
1.00A
1.10A
0.005A/30
POLY-FUSE® Resettable PTCs
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
Surface Mount > 0805L Series
Environmental Specifications
Operating/Storage
Temperature -40°C to +85°C
Maximum Device Surface
Temperature in Tripped
State
125°C
Passive Aging +85°C, 1000 hours
-/+5% typical resistance change
Humidity Aging +85°C, 85%, R.H.,1000 hours
-/+5% typical resistance change
Thermal Shock
MIL–STD–202, Method 107
+85°C/-40°C 20 times
-30% typical resistance change
Solvent Resistance MIL–STD–202, Method 215
No change
Vibration
MIL–STD–883, Method 2007,
Condition A
No change
Moisture Sensitivity Level Level 1, J–STD–020
Physical Specifications
Terminal Material Solder-Plated Copper
(Solder Material: Matte Tin (Sn))
Lead Solderability Meets EIA Specification RS186-9E,
ANSI/J-STD-002, Category 3
Soldering Parameters
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
reheat
Ramp-up
R
amp-up
Ramp-down
R
amp-d
o
Critical Zone
tL to tP
Profile Feature Pb-Free Assembly
Average Ramp-Up Rate (TS(max) to TP) 3°C/second max
Pre Heat:
Temperature Min (Ts(min))150°C
Temperature Max (Ts(max))200°C
Time (Min to Max) (ts)60 – 180 secs
Time Maintained
Above:
Temperature (TL)217°C
Temperature (tL)60 – 150 seconds
Peak / Classification Temperature (TP) 260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP) 8 minutes Max.
-- All temperature refer to topside of the package, measured on the package body surface
-- If reflow temperature exceeds the recommended profile, devices may not meet the
performance requirements
-- Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment
for lead
-- Recommended maximum paste thickness is 0.25mm (0.010 inch)
-- Devices can be cleaned using standard industry methods and solvents
-- Devices can be reworked using the standard industry practices
POLY-FUSE® Resettable PTCs
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
Surface Mount > 0805L Series
Part Ordering Number System
PACKAGING STYLE
SIZE
L: LITTELFUSE SURFACE MOUNT PPTC
I
HOLD
HOLD CURRENT CODE
(Refer to Electrical Characteristics Table)
/XX: SPECIAL VOLTAGE RATING
(Not applicable to all parts. Refer
to Electrical Characteristics Table)
QUANTITY CODE: K=10,000 Y=4,000 W=3,000 P=2,000
R: Tape & Reel
SERIES
0805 L 380 /12 TH Y R
THIN PROFILE
(Not applicable to all parts)
-A: Automotive grade
Blank: Standard version
- A
Packaging
Dimensions
Part
Number
A B C D E
Inches mm Inches mm Inches mm Inches mm Inches mm
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
0805L005/30 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.03 0.05 0.75 1.25 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L010 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.02 0.04 0.55 1. 0 0 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L010/24 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.02 0.04 0.55 1. 0 0 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L020 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.02 0.04 0.55 1. 0 0 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L035 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.02 0.03 0.45 0.75 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L050 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.03 0.05 0.75 1.25 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L075 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.03 0.05 0.75 1.25 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L100 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.02 0.07 0.50 1.80 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L110 0.08 0.09 2.00 2.20 0.05 0.06 1.20 1.50 0.03 0.06 0.80 1.40 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
C
Top
View
Pad
Layout
Side
View
Bo
ttom
View
1.50 mm
(.059)
1.20 mm
(.047)
1. 00 mm
(.040)
D
MARKING CODE VARIES
WITH AMPERAGE RATING
(See Electrical Characteristic Table)
SHOWN IS 1.0AMP RATING
E
A
B
N
N
Part Number Ordering
Number
Halogen
Free
I hold
(A) I hold Code Packaging
Option Quantity Quantity &
Packaging Codes
0805L005/30 0805L005/30YR Ye s 0.05 005 Tape and Reel 4000 YR
0805L010 0805L010YR Ye s 0.10 010 Tape and Reel 4000 YR
0805L010/24 0805L010/24YR Ye s 0.10 010 Tape and Reel 4,000 YR
0805L020 0805L020YR Ye s 0.20 020 Tape and Reel 4000 YR
0805L035 0805L035YR Ye s 0.35 035 Tape and Reel 4000 YR
0805L050 0805L050WR Ye s 0.50 050 Tape and Reel 3000 WR
0805L075 0805L075WR Ye s 0.75 075 Tape and Reel 3000 WR
0805L100 0805L100WR Ye s 1. 0 0 100 Tape and Reel 3000 WR
0805L110 0805L110WR Ye s 1. 10 110 Tape and Reel 3000 WR
POLY-FUSE® Resettable PTCs
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
Surface Mount > 0805L Series
TAPE SPECIFICATIONS: EIA-481-1 (mm)
REEL DIMENSIONS:
EIA-481-1 (mm)
0805L005/30
0805L010
0805L020
0805L035
0805L010/24
0805L050
0805L075
0805L100
0805L110
W8.00+/- 0.10 8.00+/- 0.30 8.00+/- 0.30 CØ178+/- 1.0
F3.50+/- 0.05 3.50+/- 0.05 3.50+/- 0.05 DØ60.2+0.5
E11.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 H11.0+/- 0.5
D01.55+/- 0.05 1.55+/- 0.05 1.55+/- 0.05 W9.0+/- 1.5
D11.00 (min) 1.00+/- 0.10 1.00+/- 0.10
P04.00+/- 0.10 4.00+/- 0.10 4.00+/- 0.10
P14.00+/- 0.10 4.00+/- 0.10 4.00+/- 0.10
P22.00+/- 0.05 2.00+/- 0.05 2.00+/- 0.05
A01.45+/- 0.10 1.65+/- 0.10 1.65+/- 0.10
B02.30+/- 0.10 2.35+/- 0.10 2.35+/- 0.10
T0.25+/- 0.10 0.20+/- 0.10 0.25+/- 0.10
K00.90+/- 0.10 1.05+/- 0.10 1.50+/- 0.10
Leader min. 390 390 390
Trailer min. 160 160 160
Tape and Reel Specifications
WARNING
• Users shall independently assess the suitability of these devices for each of their applications
• Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such
conditions are expected to be repetitive or prolonged in duration
• Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
• Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device.
W
C
D
H
D1
K0B0
D1
T
F
W
E1
P2
D0
P0
P1
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.