FH36 Series●0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Specifications
Storage
temperature range
Storage
humidity range
-10 to +50°C (Note 3)
Relative humidity 90%
max. (No condensation)
Note 1: When passing the current through all of the contacts, use 70% of the rated current.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in
storage, shipment or during transportation.
Item Specification Conditions
Rating
Current rating
Voltage rating
0.2 A DC (Note 1)
30 Vrms AC
Operating
temperature range
Operating
humidity range
-55 to +85°C (Note 2)
Relative humidity 90%
max. (No condensation)
1.Insulation resistance
2.Withstanding voltage
3.Contact resistance
4.Durability
5.Vibration
6.Shock
7.Humidity
(Steady state)
8.Temperature cycle
9.Resistance to
soldering heat
50 Mø min
No flashover or insulation breakdown
100 mø max.
* Including FPC conductor resistance
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1 μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1 μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
No deformation of components affection performance.
100 V DC
90 Vrms AC / one minute
1 mA
10 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm
10 cycles in each of the 3 directions
Acceleration of 981m/s2, 6 ms duration,
sine half-wave, 3 cycles in each of the 3 axis
96 hours at a temperature of 40°C and
humidity of 90 to 95%
Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç
Time: 30➝2 to 3 ➝30➝2 to 3 minutes
5 cycles
1) Reflow: At the recommended temperature profile.
2) Manual soldering: 350ç ± 10ç for 5 seconds
Recommended FPC Thickness: 0.2±0.03mm Gold plated
FH 36 W - 51S - 0.3 SHW (50)
■Ordering information
Series name : FH
Series No. : 36
Blank :Standard
W :Halogen-free
(Flame retardance UL94HB).
Number of positions : 11 to 61
Contact pitch : 0.3mm
Termination type: SMT horizontal staggered mounting type
specifications
(50)…Gold plating with nickel barrier 5,000 pieces/reel
(99)…Gold plating with nickel barrier 500 pieces/reel
1 2 3 4 5 6 7
4
5
3 6
7
Part Material Finish Remarks
Insulator LCP Color: Beige UL94V-0
Actuator PA FH36 series: Dark brown
FH36W series: Light brown UL94HB
Contacts Phosphor bronze Gold plating -----------------
Metal fittings Pure tin reflow plating -----------------
■Materials
1
2
2