SU.SUC/SUT-10
SU.SUC/SUT
MODEL
SUW1R50512 SUW1R50515 SUW1R51212 SUW1R51215 SUW1R52412 SUW1R52415 SUW1R54812 SUW1R54815
MAX OUTPUT WATTAGE[W] 1.56 1.5 1.56 1.5 1.56 1.5 1.56 1.5
DC OUTPUT
VOLTAGE[V]
*1
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.065 0.05 0.065 0.05 0.065 0.05 0.065 0.05
SPECIFICATIONS
MODEL
SUW1R50512 SUW1R50515 SUW1R51212 SUW1R51215 SUW1R52412 SUW1R52415 SUW1R54812 SUW1R54815
INPUT VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 76
CURRENT[A]
*2
0.433typ 0.417typ 0.173typ 0.167typ 0.087typ 0.083typ 0.043typ 0.042typ
EFFICIENCY[%]
*2
72typ 72typ 75typ 75typ 75typ 75typ 75typ 75typ
OUTPUT
VOLTAGE[V] t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)
CURRENT[A] 0.065 0.05 0.065 0.05 0.065 0.05 0.065 0.05
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
-20 to +55C
*3
120max 120max 120max 120max 120max 120max 120max 120max
-40 to -20C
*3
150max 150max 150max 150max 150max 150max 150max 150max
RIPPLE NOISE[mVp-p]
-20 to +55C
*3
150max 150max 150max 150max 150max 150max 150max 150max
-40 to -20C
*3
200max 200max 200max 200max 200max 200max 200max 200max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
-40 to +55C
240max 290max 240max 290max 240max 290max 240max 290max
DRIFT[mV]
*4
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
ISOLATION
SAFETY
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each along X,Y and Z axis
OTHERS 21.4X6.5X12.2mm [0.84X0.26X0.48 inches] (WXHXD) / 2g max
COOLING METHOD
CASE SIZE/WEIGHT UL60950-1, C-UL, EN60950-1AGENCY APPROVALS
Fixed (TRM pin open)t5% adjustable by external VR
-40 to +85C,20 - 95%RH (Non condensing)(
Required Derating), 3,000m (10,000feet)max
-40 to +100C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
Convection/Forced air
OUTPUT VOLTAGE ADJUSTMENT RANGE
OUTPUT VOLTAGE SETTING[V] (t5%)
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW1R5
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray (SMD type)
R
SU.SUC/SUT
SU.SUC/SUT-10
SU W 1R5 12 12 B P
1234567
Unit : 0.1inch
type B
type C
6-º0.9
Dimensions in mm, [ ]=inches
3.2
1.4
3.2 25.22
Recommended Pad and Hole dia.
(TOP VIEW)
-Vout
-Vin
+Vin COM
TRM
-Vout
+Vout
COM
TRM
+Vout
-Vin
+Vin
1. SMD(type B)
2. DIP(type C)
7.62±0.2
7.62±0.2
2.54±0.2
2.54±0.2
2.54±0.2 2.54±0.2
6.5
6.5
23.62±0.6
7.62±0.2
12.2
21.4
0.6±0.1
20.32
0.6±0.1
1.8±0.3
12.2
21.4
7.62±0.2
3.68±0.25
(1.75)
(0-10Ëš)
Adsorption area º6min
Pin terminal part details
Coplanarity within 0.1
Model
Model
0.1min
0.1min
¶ Weight : 2g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.004]
[0.004]
[0.24]
[0.99]
[0.04]
[0.13] [0.13]
[0.84]
[0.8]
[0.3]
[0.48]
[0.26]
[0.07] [0.93]
[0.84]
[0.14]
[0.3] [0.3]
[0.02]
[0.1] [0.1]
[0.3]
[0.06]
[0.07]
[0.48]
[0.26]
[0.02]
[0.1] [0.1]
SU.SUC/SUT
SU.SUC/SUT-11
SUW1R5
External view
SU_E.indd 10 15.6.24 4:22:22 PM
SU.SUC/SUT-11
SU.SUC/SUT
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW1R5
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray (SMD type)
R
SU.SUC/SUT
SU.SUC/SUT-10
SU W 1R5 12 12 B P
1234567
Unit : 0.1inch
type B
type C
6-º0.9
Dimensions in mm, [ ]=inches
3.2
1.4
3.2 25.22
Recommended Pad and Hole dia.
(TOP VIEW)
-Vout
-Vin
+Vin COM
TRM
-Vout
+Vout
COM
TRM
+Vout
-Vin
+Vin
1. SMD(type B)
2. DIP(type C)
7.62±0.2
7.62±0.2
2.54±0.2
2.54±0.2
2.54±0.2 2.54±0.2
6.5
6.5
23.62±0.6
7.62±0.2
12.2
21.4
0.6±0.1
20.32
0.6±0.1
1.8±0.3
12.2
21.4
7.62±0.2
3.68±0.25
(1.75)
(0-10Ëš)
Adsorption area º6min
Pin terminal part details
Coplanarity within 0.1
Model
Model
0.1min
0.1min
¶ Weight : 2g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.004]
[0.004]
[0.24]
[0.99]
[0.04]
[0.13] [0.13]
[0.84]
[0.8]
[0.3]
[0.48]
[0.26]
[0.07] [0.93]
[0.84]
[0.14]
[0.3] [0.3]
[0.02]
[0.1] [0.1]
[0.3]
[0.06]
[0.07]
[0.48]
[0.26]
[0.02]
[0.1] [0.1]
SU.SUC/SUT
SU.SUC/SUT-11
SUW1R5
External view
SU_E.indd 11 15.6.24 4:22:23 PM
SU.SUC/SUT-12
SU.SUC/SUT
MODEL SUW30512 SUW30515 SUW31212 SUW31215 SUW32412 SUW32415 SUW34812 SUW34815
MAX OUTPUT WATTAGE[W] 3.12 3 3.12 3 3.12 3 3.12 3
DC OUTPUT
VOLTAGE[V]
*1
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.13 0.1 0.13 0.1 0.13 0.1 0.13 0.1
SPECIFICATIONS
MODEL SUW30512 SUW30515 SUW31212 SUW31215 SUW32412 SUW32415 SUW34812 SUW34815
INPUT VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 76
CURRENT[A]
*2
0.822typ 0.334typ 0.321typ 0.167typ 0.161typ 0.084typ 0.081typ
EFFICIENCY[%]
*2
76typ 76typ 78typ 78typ 78typ 78typ 78typ 78typ
OUTPUT
VOLTAGE[V] t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)
CURRENT[A] 0.13 0.1 0.13 0.1 0.13 0.1 0.13 0.1
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
-20 to +55C
*3
120max 120max 120max 120max 120max 120max 120max 120max
-40 to -20C
*3
150max 150max 150max 150max 150max 150max 150max 150max
RIPPLE NOISE[mVp-p]
-20 to +55C
*3
150max 150max 150max 150max 150max 150max 150max 150max
-40 to -20C
*3
200max 200max 200max 200max 200max 200max 200max 200max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
-40 to +55C
240max 290max 240max 290max 240max 290max 240max 290max
DRIFT[mV]
*4
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
REMOTE ON/OFF Provided (Negative logicL:ON
,H : OFF)
ISOLATION
SAFETY
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each along X,Y and Z axis
OTHERS 24X6.5X15.1mm [0.94X0.26X0.59 inches] (WXHXD) / 3g max
COOLING METHOD
Fixed (TRM pin open)t5% adjustable by external VR
0.790typ
CASE SIZE/WEIGHT UL60950-1, C-UL, EN60950-1AGENCY APPROVALS
-40 to +85C,20 - 95%RH (Non condensing)(
Required Derating), 3,000m (10,000feet)max
-40 to +100C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
Convection/Forced air
OUTPUT VOLTAGE ADJUSTMENT RANGE
OUTPUT VOLTAGE SETTING[V] (t5%)
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW3
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray (SMD type)
8Optional
G:Capacitor between
Input and Output is
removed.
R
SU.SUC/SUT
SU.SUC/SUT-12
SU W 3 12 12 B P -O
12345678
-Vout
COM
TRM
+Vout
Model
RC
-Vin
+Vin
RC -Vout
COM
TRM
+Vout
-Vin
Adsorption area º6min
+Vin
Coplanarity within 0.1
Model
Dimensions in mm, [ ]=inches
7-º0.9
type C
type B
Unit : 0.1inch
Recommended Pad and Hole dia.
(TOP VIEW)
1.SMD(type B)
2.DIP(type C)
Pin terminal part details
22.86
3.68±0.25 6.5 24
15.1
0.6±0.1
2.54±0.2
7.62±0.2
7.62 ±0.2
2.54 ±0.2 2.54 ±0.2
2.54±0.2
7.62±0.2
24
26.16±0.6
6.5 0.6±0.1
15.1
7.62±0.2
2.54±0.2 2.54±0.2
(1.8)
27.76
3.2
1.4
3.2
1.8±0.3
(0-10Ëš)
0.1min
0.1min
¶ Weight : 3g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.94]
[0.94]
[0.24]
[0.004]
[1.09]
[0.04]
[0.13] [0.13]
[1.03]
[0.26]
[0.07]
[0.14]
[0.9]
[0.004]
[0.3]
[0.59]
[0.02]
[0.26] [0.02]
[0.59]
[0.3]
[0.06]
[0.1] [0.1]
[0.3]
[0.1]
[0.07]
[0.1]
[0.3]
[0.1] [0.1]
SU.SUC/SUT
SU.SUC/SUT-13
SUW3
External view
SU_E.indd 12 15.6.24 4:22:23 PM
SU.SUC/SUT-13
SU.SUC/SUT
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW3
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray (SMD type)
8Optional
G:Capacitor between
Input and Output is
removed.
R
SU.SUC/SUT
SU.SUC/SUT-12
SU W 3 12 12 B P -O
12345678
-Vout
COM
TRM
+Vout
Model
RC
-Vin
+Vin
RC -Vout
COM
TRM
+Vout
-Vin
Adsorption area º6min
+Vin
Coplanarity within 0.1
Model
Dimensions in mm, [ ]=inches
7-º0.9
type C
type B
Unit : 0.1inch
Recommended Pad and Hole dia.
(TOP VIEW)
1.SMD(type B)
2.DIP(type C)
Pin terminal part details
22.86
3.68±0.25 6.5 24
15.1
0.6±0.1
2.54±0.2
7.62±0.2
7.62 ±0.2
2.54 ±0.2 2.54 ±0.2
2.54±0.2
7.62±0.2
24
26.16±0.6
6.5 0.6±0.1
15.1
7.62±0.2
2.54±0.2 2.54±0.2
(1.8)
27.76
3.2
1.4
3.2
1.8±0.3
(0-10Ëš)
0.1min
0.1min
¶ Weight : 3g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.94]
[0.94]
[0.24]
[0.004]
[1.09]
[0.04]
[0.13] [0.13]
[1.03]
[0.26]
[0.07]
[0.14]
[0.9]
[0.004]
[0.3]
[0.59]
[0.02]
[0.26] [0.02]
[0.59]
[0.3]
[0.06]
[0.1] [0.1]
[0.3]
[0.1]
[0.07]
[0.1]
[0.3]
[0.1] [0.1]
SU.SUC/SUT
SU.SUC/SUT-13
SUW3
External view
SU_E.indd 13 15.6.24 4:22:24 PM
SU.SUC/SUT-14
SU.SUC/SUT
MODEL SUW60512 SUW60515 SUW61212 SUW61215 SUW62412 SUW62415 SUW64812 SUW64815
MAX OUTPUT WATTAGE[W] 66666666
DC OUTPUT
VOLTAGE[V]
*1
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2
SPECIFICATIONS
MODEL SUW60512 SUW60515 SUW61212 SUW61215 SUW62412 SUW62415 SUW64812 SUW64815
INPUT VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 76
CURRENT[A]
*2
1.538typ 1.538typ 0.588typ 0.588typ 0.291typ 0.291typ 0.145typ 0.145typ
EFFICIENCY[%]
*2
78typ 78typ 85typ 85typ 86typ 86typ 86typ 86typ
OUTPUT
VOLTAGE[V] t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)
CURRENT[A] 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
-20 to +55C
*3
120max 120max 120max 120max 120max 120max 120max 120max
-40 to -20C
*3
150max 150max 150max 150max 150max 150max 150max 150max
RIPPLE NOISE[mVp-p]
-20 to +55C
*3
150max 150max 150max 150max 150max 150max 150max 150max
-40 to -20C
*3
200max 200max 200max 200max 200max 200max 200max 200max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
-40 to +55C
240max 290max 240max 290max 240max 290max 240max 290max
DRIFT[mV]
*4
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
REMOTE ON/OFF Provided (Negative logicL:ON
,H : OFF)
ISOLATION
SAFETY
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each along X,Y and Z axis
OTHERS 31.6X6.5X18.1mm [1.24X0.26X0.71 inches] (WXHX
COOLING METHOD
Fixed (TRM pin open)t5% adjustable by external VR
UL60950-1, C-UL, EN60950-1AGENCY APPROVALS D) / 4g max
CASE SIZE/WEIGHT
-40 to +85C,20 - 95%RH (Non condensing)(
Required Derating), 3,000m (10,000feet)max
-40 to +100C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
Convection/Forced air
OUTPUT VOLTAGE ADJUSTMENT RANGE
OUTPUT VOLTAGE SETTING[V] (t5%)
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW6
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray (SMD type)
8Optional
G:Capacitor between
Input and Output is
removed.
R
SU.SUC/SUT
SU.SUC/SUT-14
SU W 6 12 12 B P -O
12345678
COM
COM
-Vin -Vout
TRM
+Vout
RC
+Vin
+Vin
-Vin
+Vout
TRM
-Vout
RC
Model
Adsorption area º7min
Coplanarity within 0.1
Model
Dimensions in mm, [ ]=inches
7-º0.9
type C
type B
Unit : 0.1inch
Recommended Pad and Hole dia.
(TOP VIEW)
2.DIP(type C)
1.SMD(type B)
Pin terminal part details
2.54
±
0.2
2.54
±
0.2
5.08
±
0.2
5.08
±
0.2
12.7 ±0.2
2.54±0.2 12.7±0.2
0.6±0.1
3.68±0.25 6.5
12.7±0.2
12.7±0.2
2.54±0.2
33.78 ±0.6
31.6
18.1
0.6±0.1
6.5
31.6
18.1
30.48
(1.69)
35.38
3.2
1.4
3.2
1.8±0.3
(0-10Ëš)
0.1min
0.1min
¶ Weight : 4g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.004]
[0.004]
[0.04]
[0.28]
[1.39]
[0.13] [0.13]
[1.33]
[1.24]
[0.26][0.14]
[0.07]
[1.2]
[1.24]
[0.2] [0.1]
[0.5]
[0.5]
[0.1]
[0.02]
[0.26]
[0.1]
[0.5]
[0.07]
[0.71]
[0.2] [0.1]
[0.5]
[0.06]
[0.02]
[0.71]
SU.SUC/SUT
SU.SUC/SUT-15
SUW6
External view
SU_E.indd 14 15.6.24 4:22:24 PM
SU.SUC/SUT-15
SU.SUC/SUT
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW6
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray (SMD type)
8Optional
G:Capacitor between
Input and Output is
removed.
R
SU.SUC/SUT
SU.SUC/SUT-14
SU W 6 12 12 B P -O
12345678
COM
COM
-Vin -Vout
TRM
+Vout
RC
+Vin
+Vin
-Vin
+Vout
TRM
-Vout
RC
Model
Adsorption area º7min
Coplanarity within 0.1
Model
Dimensions in mm, [ ]=inches
7-º0.9
type C
type B
Unit : 0.1inch
Recommended Pad and Hole dia.
(TOP VIEW)
2.DIP(type C)
1.SMD(type B)
Pin terminal part details
2.54
±
0.2
2.54
±
0.2
5.08
±
0.2
5.08
±
0.2
12.7 ±0.2
2.54±0.2 12.7±0.2
0.6±0.1
3.68±0.25 6.5
12.7±0.2
12.7±0.2
2.54±0.2
33.78 ±0.6
31.6
18.1
0.6±0.1
6.5
31.6
18.1
30.48
(1.69)
35.38
3.2
1.4
3.2
1.8±0.3
(0-10Ëš)
0.1min
0.1min
¶ Weight : 4g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.004]
[0.004]
[0.04]
[0.28]
[1.39]
[0.13] [0.13]
[1.33]
[1.24]
[0.26][0.14]
[0.07]
[1.2]
[1.24]
[0.2] [0.1]
[0.5]
[0.5]
[0.1]
[0.02]
[0.26]
[0.1]
[0.5]
[0.07]
[0.71]
[0.2] [0.1]
[0.5]
[0.06]
[0.02]
[0.71]
SU.SUC/SUT
SU.SUC/SUT-15
SUW6
External view
SU_E.indd 15 15.6.24 4:22:25 PM
SU.SUC/SUT-16
SU.SUC/SUT
MODEL
SUW100512 SUW100515 SUW101212 SUW101215 SUW102412 SUW102415 SUW104812 SUW104815
MAX OUTPUT WATTAGE[W] 10.8 10.5 10.8 10.5 10.8 10.5 10.8 10.5
DC OUTPUT
VOLTAGE[V]
*1
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.45 0.35 0.45 0.35 0.45 0.35 0.45 0.35
SPECIFICATIONS
MODEL
SUW100512 SUW100515 SUW101212 SUW101215 SUW102412 SUW102415 SUW104812 SUW104815
INPUT VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 76
CURRENT[A]
*2
2.51typ 2.44typ 1.05typ 1.02typ 0.523typ 0.509typ 0.262typ 0.254typ
EFFICIENCY[%]
*2
86typ 86typ 86typ 86typ 86typ 86typ 86typ 86typ
OUTPUT
VOLTAGE[V] t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)t12(+24)t15(+30)
CURRENT[A] 0.45 0.35 0.45 0.35 0.45 0.35 0.45 0.35
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
-20 to +55C
*3
120max 120max 120max 120max 120max 120max 120max 120max
-40 to -20C
*3
150max 150max 150max 150max 150max 150max 150max 150max
RIPPLE NOISE[mVp-p]
-20 to +55C
*3
150max 150max 150max 150max 150max 150max 150max 150max
-40 to -20C
*3
200max 200max 200max 200max 200max 200max 200max 200max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
-40 to +55C
240max 290max 240max 290max 240max 290max 240max 290max
DRIFT[mV]
*4
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
REMOTE ON/OFF Provided (Negative logicL:ON
,H : OFF)
ISOLATION
SAFETY
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each along X,Y and Z axis
OTHERS 39.2X6.5X21.0mm [1.54X0.26X0.83 inches] (WXHX
COOLING METHOD
Fixed (TRM pin open)t5% adjustable by external VR
UL60950-1, C-UL, EN60950-1AGENCY APPROVALS D) / 6g max
CASE SIZE/WEIGHT
-40 to +85C,20 - 95%RH (Non condensing)(
Required Derating), 3,000m (10,000feet)max
-40 to +100C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
Convection/Forced air
OUTPUT VOLTAGE ADJUSTMENT RANGE
OUTPUT VOLTAGE SETTING[V] (t5%)
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW10
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray(SMD type)
8Optional
G:Capacitor between
Input and Output is
removed.
R
SU.SUC/SUT
SU.SUC/SUT-16
SU W 10 12 12 B P -O
12345678
-Vin
RC
+Vin Model
+Vout
COM
TRM
-Vout
Coplanarity within 0.1
Adsorption area º8min
Model
RC -Vout
TRM
+Vout
-Vin
+Vin
COM
Pin terminal part details
1.SMD(type B)
2.DIP(type C)
Recommended Pad and Hole dia.
(TOP VIEW)
Unit : 0.1inch
type B
type C
7-º0.9
Dimensions in mm, [ ]=inches
3.68±0.25
21
39.2
6.5
15.24±0.2
38.1
15.24±0.2
41.4±0.6
39.2
6.5
15.24 ±0.2
21
2.54±0.2 15.24±0.2
(2.16)
0.6±0.1
1.8±0.3
3.2
1.4
3.2 43
7.62±0.2 2.54±0.2 7.62 ±0.2 2.54±0.2
(0-10Ëš)
0.1min
0.1min
0.6±0.1
2.54±0.2
¶ Weight : 6g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.004]
[0.004]
[1.54]
[1.63]
[0.31]
[0.13] [0.13]
[1.69]
[0.04]
[1.54]
[1.5]
[0.26][0.14]
[0.07]
[0.6]
[0.83]
[0.3]
[0.6]
[0.1] [0.6]
[0.1]
[0.02]
[0.26] [0.02] [0.09]
[0.83]
[0.6]
[0.06]
[0.3] [0.1]
[0.1]
SU.SUC/SUT
SU.SUC/SUT-17
SUW10
External view
SU_E.indd 16 15.6.24 4:22:25 PM
SU.SUC/SUT-17
SU.SUC/SUT
*1Output pins can be connected in series to make a 24V/30V output.
*2Rated input 5V, 12V, 24V or 48V DC Io=100%
*3Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*Parallel operation with other model is not possible.
SUW10
DC-DC Converters PCB Mount Type
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Mounting type
B :SMD
C :DIP
7Packing form
Blank:Plastic cover
P :Tray(SMD type)
8Optional
G:Capacitor between
Input and Output is
removed.
R
SU.SUC/SUT
SU.SUC/SUT-16
SU W 10 12 12 B P -O
12345678
-Vin
RC
+Vin Model
+Vout
COM
TRM
-Vout
Coplanarity within 0.1
Adsorption area º8min
Model
RC -Vout
TRM
+Vout
-Vin
+Vin
COM
Pin terminal part details
1.SMD(type B)
2.DIP(type C)
Recommended Pad and Hole dia.
(TOP VIEW)
Unit : 0.1inch
type B
type C
7-º0.9
Dimensions in mm, [ ]=inches
3.68±0.25
21
39.2
6.5
15.24±0.2
38.1
15.24±0.2
41.4±0.6
39.2
6.5
15.24 ±0.2
21
2.54±0.2 15.24±0.2
(2.16)
0.6±0.1
1.8±0.3
3.2
1.4
3.2 43
7.62±0.2 2.54±0.2 7.62 ±0.2 2.54±0.2
(0-10Ëš)
0.1min
0.1min
0.6±0.1
2.54±0.2
¶ Weight : 6g max
¶
Plating treatment of terminal : Lead free plating
¶ Pin terminal material : Copper alloy
¶ Tolerance ±0.5 [±0.02]
¶ Pin terminal thickness : 0.3±0.1 [0.012]
¶ Dimensions in mm, [ ]=inches
[0.004]
[0.004]
[0.004]
[1.54]
[1.63]
[0.31]
[0.13] [0.13]
[1.69]
[0.04]
[1.54]
[1.5]
[0.26][0.14]
[0.07]
[0.6]
[0.83]
[0.3]
[0.6]
[0.1] [0.6]
[0.1]
[0.02]
[0.26] [0.02] [0.09]
[0.83]
[0.6]
[0.06]
[0.3] [0.1]
[0.1]
SU.SUC/SUT
SU.SUC/SUT-17
SUW10
External view
SU_E.indd 17 15.6.24 4:22:26 PM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cosel:
SUW62415B SUW60512B SUW32415BP SUW64815BP SUW1R50515BP SUW100515C SUW1R52412C
SUW61215B SUW31215BP-G SUW100512C SUW104812B SUW101212C SUW1R54812C SUW30515B
SUW102412C-G SUW1R52415C SUW31212B SUW1R51212BP SUW61215C-G SUW1R52412BP SUW32412C
SUW34812C SUW32415C-G SUW101215C SUW100512BP SUW1R54815C SUW62412BP SUW32412B-G
SUW104815B SUW62412C-G SUW31212C-G SUW64812B SUW102415C-G SUW1R51215BP SUW100515BP
SUW1R50515B SUW104812C SUW102412B-G SUW32415B-G SUW62415BP SUW1R51215B SUW32415C
SUW34812BP SUW102415C SUW1R52412B SUW31212C SUW101212BP SUW32412BP-G SUW1R54812BP
SUW30512BP SUW31215B-G SUW1R51212C SUW102412BP-G SUW32415BP-G SUW34815BP SUW104812BP
SUW64815C SUW101215C-G SUW31212BP SUW34812B SUW101212B SUW1R50512BP SUW61212C-G
SUW60512BP SUW32412BP SUW102415BP-G SUW1R51215C SUW101215BP SUW61212C SUW100515B
SUW1R52415B SUW62415C SUW61215BP SUW62415B-G SUW101215B SUW62412B SUW102415B
SUW62412BP-G SUW100512B SUW1R50512B SUW64815B SUW61215C SUW31215BP SUW60512C
SUW30512B SUW100512B-G SUW62412B-G SUW102415B-G SUW104815C SUW32412C-G SUW32415B
SUW1R50512C SUW64812C SUW1R50515C SUW30515BP SUW1R54812B SUW104815BP SUW31215C
SUW34815B SUW61212BP