www.ittcannon.com 229
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
Standard Circular Connectors CGE
Conector Design - CGE
How To Order - CGE
SERIES
CGE - ITT Cannon Prefix
3 AWG
0 AWG
000 AWG
250 MCM
400 MCM
H2 -
H5 -
H9 -
H15 -
H24 -
F - Spring contact
Z - Cylindrical contact
Standard - 180˚
W - 120˚
- Bayonet coupling
- Through holes in flange
- Adapter for heat shrink boots, met-
ric size crimp contact
- Rear panel mounting, four threaded
holes, metric size crimp contact
- Same as 04, however with four
thourgh holes
- shielded version, metric size crimp
contact
- Thread bolt termaination, front panel
mounting, 0-ring for sealing be-
tween wall and receptacle (only for
style CGE2EB)
05
03
04
04-05
14
16
B
0 - Wall mounting receptacle with mounting
flange
1 - Cable connecting plug
2 - Box mounting receptacle with mounting
flange
6 - Straight plug
8 - 90˚ angle plug
E - Environmental, class JP 07, according to
DIN 40050
16H2 - Shell size 16, 1 contact H2
18H5 - Shell size 18, 1 contact H5
22H9 - Shell size 22, 1 contact H9
28H15 - Shell size 28, 1 contact H15
32H24 - Shell size 32, 1 contact H24
16 - 18 - 22 - 28 - 32
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT SIZE
SERIES
CGE
SPRING
RING
SPRING
RING
INSULATOR
REAR SIDE O RING
O RING
Receptacle CGE2...B-04
Plug CGE6...B-03
SHELL
INSULATOR
CYLINDRICAL
CONTACT
FRONT SIDE
INSULATOR
CYLINDRICAL
CONTACT
REAR SIDE
CYLINDRICAL
CONTACT
O RING
SPRING
CONTACT INSULATOR
FRONT SIDE BARREL ASSEMBLY
6 E 32 H 24 F W B * * *
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT SIZE
CONTACT TYPE
ALTERNATE KEYWAY POLARIZATION
BAYONET COUPLING
MODIFICATION
BAYONET COUPLING
MODIFICATIONS
CONTACT TYPE
ALTERNATE KEYWAY POLARIZATION
These connectors are used to transmit very high
current at low voltage, as for example in the
electrical equipment of miltary land and sea-borne
vehicles and in industrial facilities. The connecotrs
meet the mating dimensions, mechanical features
and rear panel installation requirements of
VG 95234. Ultraflexible, shielded weld cables are
terminated to the connectors.
These high power connectors feature one contact in
a two-piece rigid insulator. The aluminum shell has
a chromate finish over cadmium. The operating
temperature ranges from -55˚C to +125˚C
(-67˚F to +257˚F). The contacts of copper or
copper alloy with hard sliver finish are designed for
crimping or termination to solid copper conductors
with threaded bolts. The mechanical durability is a
minimum of 500 mating cycles. The crimp contacts
accept wires per DIN 46438 (25-240 sq. mm).
Contact retention is achieved by the two-piece
insulator which is fixed to the shell with a snap-in
ring. This allows unlimited exchange of the crimp
contacts. The bayonet coupling assures fast
coupling and uncoupling. Color-coded snap-in points
indicate positive mating. Plugs and receptacles are
waterproof in mated conditions up to 1 bar (35 feet
of water).
www.ittcannon.com 230
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
Standard Circular Connectors CGE
Performance and Material Specifications -CGE
Alternate Keyway Positions - CGE
MECHANICAL ELECTRICAL DATA
MATERIALS AND FINISHES
COUPLING TORQUE
(IN WIRED CONDITION ACC. TO VG 95319 Part 2, Test No. 5.8.2.)
Admissible ambient temperature
Class
Vibration
Mecanical durability
Shell Size
Contact Size
16
18
22
28
32
5.5
8.0
11.0
17.0
19.0
H2
H5
H9
H15
H24
To avoid mismating of identical connectors, the
keyway of the CGE connectors is available in two
different positions:
Standard Keyway position = 180˚
Keyway position W = 120˚
Keyway position of receptacles
and cable connecting plugs.
Keyway position of straight
and 90˚ angle plugs.
.197 (5.00)
Max.
1.732
(44.50)
180˚
120˚
2.244
(57.00)
120˚
180˚
25
50
95
150
240
3 AWG
0 AWG
000 AWG
250 AWG
400 AWG
100
120
140
160
200
359.70
431.64
503.58
575.52
719.4
(amps) at 125˚C ambient temperature:
Shell size
Contact size
16
H2
Air path
Creepage path
Conact Size
min. 5000 M0hm
H2
0,6
H5
0,3
H9
0,15
H15
0,1
H24
0,07
.118 (3.00) min.
.197 (5.00) min.
250 300 500 650 1000
750 1000 2000 3000 5000
18
H5
22
H9
28
H15
32
H24
Max. current
rating (amps at 125˚C
ambient temperature
Max. short-time
load approx.
0,5 - 1 sec. (amps.)
Contact resistance
(m0hm max.)
Shell
- 55˚C to +125˚C
JP 07 according to DIN 40050
Test pressure: 1 bar overpressure
Test duration 12 hours
200 m/s for 10 to 2000 Hz
500 mating cycles
Aluminum alloy
Finish Olive chromate
over cadmium
Insulator PTFE
Contact Copper and copper
alloy
Finish Hard silver
O-Rings Viton
3,597 = (Oz & Ozm)
19.78
28.78
39.57
61.15
68.34
0,5
0,6
0,8
0,9
1,0
1.80
2.16
2.88
3.24
3.60
Metric
Wire Size
(mm )
American
Wire Size
(AWG) or (MCM)
Test Force
(N min.) (Oz. min.)
2
2
max. closing/opening torque
Nm ozm
min. opening torque
Nm ozm
CONTACT RETENTION
(ACC. TO VG 95319, PART 2. TEST NO. 5.4)
CONTACT RATING
AIR AND CREEPAGE PATHS
CONTACT RESISTANCE
INSULATOR RESISTANCE
