MMSZ5225-V-G to MMSZ5267-V-G
Vishay Semiconductors
17431
Document Number 83387
Rev. 1.0, 17-Nov-10
www.vishay.com
1
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Small Signal Zener Diodes
Features
Silicon planar power Zener ziodes.
Standard Zener voltage tolerance is ± 5 %
with a “B” suffix (e.g.: MMSZ5225B-V-G),
suffix “C” is ± 2 % tolerance
AEC-Q101 qualified
Compliant to RoHS Directive 2002/95/EC
and in accordance to WEEE 2002/96/EC
Mechanical Data
Case: SOD-123
Weight: approx. 10.3 mg
Packaging codes/options:
18/10K per 13 " reel (8 mm tape), 10K/box
08/3K per 7 " reel (8 mm tape), 15K/box
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
1) On FR - 4 or FR - 5 board with minimum recommended solder pad layout.
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
1) On FR - 4 or FR - 5 board with minimum recommended solder pad layout.
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Parameter Test condition Symbol Value Unit
Zener current (see table "Characteristics")
Power dissipation TL = 75 °C Ptot 500 1) mW
Parameter Test condition Symbol Value Unit
Thermal resistance junction to ambient air RthJA 340 1) K/W
Maximum junction temperature Tj150 °C
Storage temperature range Tstg - 65 to + 175 °C
MMSZ5225-V-G to MMSZ5267-V-G
Vishay Semiconductors
Document Number 83387
Rev. 1.0, 17-Nov-10
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Electrical Characteristics
Maximum VF = 0.9 V, at IF = 10 mA
1) The Zener Impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of
the Zener current (IZT or IZK) is superimposed on IZT or IZK. Zener Impedance is measured at two points to insure a sharp knee on the
breakdown curve and to eliminate unstable units.
2) Measured with device junction in thermal equilibrium.
Part number
Marking code
Nominal
Zener
voltage 2)
Te s t
current
Maximum dynamic
impedance 1)
Typical temperature
of coefficient
Maximum reverse
leakage current
± 2 % ± 5 % VZ at IZT IZT ZZT at IZT
ZZK at IZK
= 0.25 mA
αVZ IRVR
VmA Ω Ω %/°C µA V
MMSZ5225-V-G C.0 C0 3 20 30 1600 - 0.075 50 1
MMSZ5226-V-G D.6 D6 3.3 20 28 1600 - 0.070 25 1
MMSZ5227-V-G D.7 D7 3.6 20 24 1700 - 0.065 15 1
MMSZ5228-V-G D.8 D8 3.9 20 23 1900 - 0.060 10 1
MMSZ5229-V-G D.9 D9 4.3 20 22 2000 - 0.055 5 1
MMSZ5230-V-G D.0 D0 4.7 20 19 1900 ± 0.030 5 2
MMSZ5231-V-G E.6 E6 5.1 20 17 1600 ± 0.030 5 2
MMSZ5232-V-G E.7 E7 5.6 20 11 1600 + 0.038 5 3
MMSZ5233-V-G E.8 E8 6 20 7 1600 + 0.038 5 3.5
MMSZ5234-V-G E.9 E9 6.2 20 7 1000 + 0.045 5 4
MMSZ5235-V-G E.0 E0 6.8 20 5 750 + 0.050 3 5
MMSZ5236-V-G F.6 F6 7.5 20 6 500 + 0.058 3 6
MMSZ5237-V-G F.7 F7 8.2 20 8 500 + 0.062 3 6.5
MMSZ5238-V-G F.8 F8 8.7 20 8 600 + 0.065 3 6.5
MMSZ5239-V-G F.9 F9 9.1 20 10 600 + 0.068 3 7
MMSZ5240-V-G F.0 F0 10 20 17 600 + 0.075 3 8
MMSZ5241-V-G H.6 H6 11 20 22 600 + 0.076 2 8.4
MMSZ5242-V-G H.7 H7 12 20 30 600 + 0.077 1 9.1
MMSZ5243-V-G H.8 H8 13 9.5 13 600 + 0.079 0.5 9.9
MMSZ5244-V-G H.9 H9 14 9 15 600 + 0.082 0.1 10
MMSZ5245-V-G H.0 H0 15 8.5 16 600 + 0.082 0.1 11
MMSZ5246-V-G J.6 J6 16 7.8 17 600 + 0.083 0.1 12
MMSZ5247-V-G J.7 J7 17 7.4 19 600 + 0.084 0.1 13
MMSZ5248-V-G J.8 J8 18 7 21 600 + 0.085 0.1 14
MMSZ5249-V-G J.9 J9 19 6.6 23 600 + 0.086 0.1 14
MMSZ5250-V-G J.0 J0 20 6.2 25 600 + 0.086 0.1 15
MMSZ5251-V-G K.6 K6 22 5.6 29 600 + 0.087 0.1 17
MMSZ5252-V-G K.7 K7 24 5.2 33 600 + 0.087 0.1 18
MMSZ5253-V-G K.8 K8 25 5 35 600 + 0.089 0.1 19
MMSZ5254-V-G K.9 K9 27 4.6 41 600 + 0.090 0.1 21
MMSZ5255-V-G K.0 K0 28 4.5 44 600 + 0.091 0.1 21
MMSZ5256-V-G M.6 M6 30 4.2 49 600 + 0.091 0.1 23
MMSZ5257-V-G M.7 M7 33 3.8 58 700 + 0.092 0.1 25
MMSZ5258-V-G M.8 M8 36 3.4 70 700 + 0.093 0.1 27
MMSZ5259-V-G M.9 M9 39 3.2 80 800 + 0.094 0.1 30
MMSZ5260-V-G M.0 M0 43 3 93 900 + 0.095 0.1 33
MMSZ5261-V-G N.6 N6 47 2.7 105 1000 + 0.095 0.1 36
MMSZ5262-V-G N.7 N7 51 2.5 125 1100 + 0.096 0.1 39
MMSZ5263-V-G N.8 N8 56 2.2 150 1300 + 0.096 0.1 43
MMSZ5264-V-G N.9 N9 60 2.1 170 1400 + 0.097 0.1 46
MMSZ5265-V-G N.0 N0 62 2 185 1400 + 0.097 0.1 47
MMSZ5266-V-G P.6 P6 68 1.8 230 1600 + 0.097 0.1 52
MMSZ5267-V-G P.7 P7 75 1.7 270 1700 + 0.098 0.1 56
MMSZ5225-V-G to MMSZ5267-V-G
Vishay Semiconductors
Document Number 83387
Rev. 1.0, 17-Nov-10
www.vishay.com
3
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Package Dimensions in milimeters (inches): SOD-123
0.1 (0.004) max.
2.85 (0.112)
2.55 (0.100)
3.85 (0.152)
3.55 (0.140)
1.7 (0.067)
1.40 (0.055)
Mounting Pad Layout
2.5 (0.098)
0.85 (0.033) 0.85 (0.033)
0.85 (0.033)
Cathode bar
0.65 (0.026)
0.45 (0.018)
0.10 (0.004)
1 (0.039)
0.15 (0.006)
1.35 (0.053)
0.2 (0.008)
0° to 8°
0.45 (0.018)
0.25 (0.010)
0.5 (0.020) ref.
Rev. 4 - Date: 24. Sep. 2009
Document no.: S8-V-3910.01-001 (4)
17432
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.