Quintuple Decker Jack Board Features 1. This large jack board with no-PWB in the back. 2. Low profile design of 6.5 mm high with 14 mm spacing provides real opportunities for thinner equipment design. 3. Most layout arrangement is flexibly possible if this board is used in combination with our 4-deck jack board series product. 4. A variety of pin numbers is available depending on their combination. The color of pin jack collars is optional. 5. A switch with each pin jack can be customer dependently available. Applications DVDs, PDPs, etc. LAP5120-0401F H=6.5mm 31 16 7 9.5 Color Layout .4 14 7 10 - o 8.3 14 3-o2 16.3 Green Blue A6 Blue 7 69 A2 14 Red A5 Red A1 White 3.4 A4 White B2 -o 10 14 <China> Green A3 Red B4 Red 16 b4 12 b5 6 10 b3 14 16 5 c2 9 3.5 1 b1 c1 b2 4 b4 8 b3 11 13 b5 15 3 c2 7 2.2 2.2 .2 R0 28 A3 5 a 8- 5.15 3.2 .1 c1 b1 b2 2 Circuits (With Switch) 10-0.8x1.5 o2 7.35 a 3.5 .5 o1 8 13.55 17.85 6 2-3x1 4- With Switch B3 3 4 6.5 28 23 15.7 11.4 Right Angle (10P) 5.5 B1 A2 A1 (Recommended P.W.Board Dimension) (The Pattern Side) B2 B1 b5 b4 b3 b2 c2 b1 c1 a A6 A5 A4 B4 B3 b5 b4 b3 b2 c2 b1 c1 a