Product Highlights
The MI-J00 family of miniaturized
DC-DC converters is designed for
military applications utilizing
distributed power architectures.
Based on Vicor’s 1st Generation
family of zero-current/zero-voltage
switching, component-level,
DC-DC converters, the MI-J00
family offers state-of-the-art
performance in terms of power
density, efficiency, noise, ease of
use, and reliability.
The MI-J00 family is designed to
exceed all steady-state, transient
and under/overvoltage
requirements of MIL-STD-704D/E
for both 28Vdc input (MI-J20) and
270Vdc input (MI-J60), and the
worst case envelope of DOD-STD-
1399A for 155Vdc input.
The output voltage can be externally
trimmed or programmed from
50% to 110% of nominal output.
Current limiting, remote sense,
and an inhibit pin all combine to
offer a high degree of protection,
versatility, and reliability for
military power systems.
All units are manufactured
in ISO 9001-registered facilities.
Full epoxy encapsulation in
Vicor’s industry standard
package enables the MI-J00
family units to meet MIL-STD-810
environmental testing
requirements for humidity,
fungus, salt fog, explosive
atmosphere, acceleration,
vibration, and shock. (See page 32.)
MI-J00TM
Military DC-DC Converters 10 to 50W
Inputs:
28Vdc per MIL-STD-704D/E
155Vdc per MIL-STD-1399A
270Vdc per MIL-STD-704D/E
Single output: 2 – 48Vdc
Up to 23W/in3
MIL-STD-810 environments
Up to 90% efficiency
Remote sense
Current limit
ZVS/ZCS power architecture
Low noise FM control
Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7mm)
PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Characteristics
Input voltage range See input voltage chart
No load power dissipation 1.35 2.0 Watts
Output Characteristics
Set point accuracy 0.5 1.0 % Vnom
Load/line regulation 0.05 0.2 % Vnom LL to HL,10% to FL
0.2 0.5 % Vnom LL to HL,NL to 10%
Output temperature drift 0.01 0.02 %/°C
Output noise - pp 1.0 1.5 % Vnom Whichever is greater
100 150 mV 20MHz BW
Output voltage trimming(1) 50 110 % Vnom
Remote sense compensation 0.5 Vdc
OVP set point N/A
Current limit 105 125 % Inom Auto restart
Short circuit current 105 130 % Inom
Control Pin Characteristics
Gate-in high threshold 6 Vdc
Gate-in low threshold 0.65 Vdc
Gate-in low current 6 mA
Isolation Characteristics
Isolation (input to output) 3,000 Vrms
Isolation (output to baseplate) 500 Vrms
Isolation (input to baseplate) 1,500 Vrms
Input/output capacitance 50 75 pF
Environmental (MIL-STD-810)
Altitude - method 500.2 70,000 feet Procedure II
Humidity - method 507.2 86 /240 %/ hour s Procedure 1,cycle 1
Acceleration - method 513.3 9 g's Procedure 2
Vibration - method 514.3 20 g's Procedure 1,category 6
Shock - method 516.3 40 g's Procedure 1
Reliability (MIL-HDBK-217F)
25°C Ground Benign: G.B. 2,871,050 hours
50°C Naval Sheltered: N.S. 667,568 hours
65°C Airborne Inhabited Cargo: A.I.C. 559,855 hour s
Thermal Character istics
Efficiency 80-90 %
Baseplate to sink 0.14 °C/W With ther mal pads
Thermal shutdown N/A
Baseplate operating temperature +100 °C See product grade
Storage temperature +125 °C See product grade
Mechanical Specifications
Weight 3.0 (85) ounces (grams)
Converter Specifications
(At TBP = 25°C, nominal line and 75% load, unless otherwise specified)
(1) 10V, 12V, and 15V outputs, standard tr im range ±10%. Consult factor y for wider trim range.
}
Features
MI-J00 10/02 1 of 2
Configuration Char t
MI-J -
Semi-custom modules available:
Consult factory.
(1) 16V operation at 75% load.
(2) These units rated at 75%
load from 125-150Vin:
MI-J6Z-xY
MI-J6Y-xY
MI-J60-xY
28Vdc input per MIL-STD 704D/E
155Vdc input per DOD-STD-1399A
270Vdc input per MIL-STD-704D/E
Product Grade Specifications
5
6
7
8
9
4
3
2
1
0.080 Dia (2) places
Solder plate
over copper alloy
0.040 (1,0) Dia (7) places
Solder plate
over copper alloy
.01
Aluminum Base
Product ID
this surface
Function
+In
–In
+Out
Trim
–Sense
–Out
Pin #
1
2
3
4
5
6
7
8
9
FULL R
+0.030 (0,76)
-0.000 (0)
(5,6) Min. (7,6) Min. (44,4) Max.
2.40
2.28
0.12
0.50
1.90
0.65
(16,5)
0.49
(12,4)
0.30±0.015
(7,6)±(0,38)
0.15
2.10
(53,4)
1.30
0.40
(10,2) 0.35± 0.015
(8,9)±(0,38)
1.40
(35,6)
1.00
(25,4)
0.70
(17,8)
Gate In
Gate Out
+Sense
MI-J00
(57,9)
(33,0)
(3,8) 0.15
(3,8)
0.30 (61,0)
1.75
(48,3) 0.22
(3,0)
(12,7)
*Test data available for review or download from vicorpower.com
Mechanical Drawing
Output Power/Current
≥5V <5V
A= 10W —
o
Z = 25W 5A
Y = 50W 10A
Product Grade Operating Temp.
I = -40°C to +100°C
M = -55°C to +100°C
PARAMETER PRODUCT GRADE
I-Grade M-Grade
Storage temperature -55°C to +125°C -65°C to +125°C
Operating temperature (baseplate) -40°C to +100°C -55°C to +100°C
Power cycling burn-in 12 hours ,25 cycles 96 hours ,200 cycles
Temperature cycled with power off 48 hour s, 12-16 cycles 48 hours ,12-16 cycles
-55°C to +100°C -65°C to +100°C
Test data supplied at these temperatures* -40°C, +80°C -55°C,+80°C
Warranty 2 years 2 years
Environmental compliance MIL-STD-810 MIL-STD-810
Derating NAVMAT P-4855-1A NAVMAT P-4855-1A
Input Voltage
Nominal Range Transient
2 = 28V 18 – 50V(1) 60V
5 = 155V 100 – 210V 230V
6 = 270V 125 – 400V(2) 475V
7 = 165V 100 – 310V
Output Voltage
Z = 2V T = 6.5V N = 18.5V
Y = 3.3V R = 7.5V 3 = 24V
0 = 5V M= 10V L = 28V
X = 5.2V 1 = 12V J = 36V
W = 5.5V P = 13.8V K = 40V
V = 5.8V 2 = 15V 4 = 48V
MI-J00 10/02 1 of 2
