Nickel Plated Brass Liquid Tight Strain Relief Fittings Multi-Hole - NPT Threads * * RoHS Part Numbers -40F to 212F (-40C to 100C) Thread Type & Size CD07AP-BR CD07AP-BR PG 7 / 1/4" NPT CD09N1-BR CD09N2-BR CD09N3-BR CD09N4-BR CD09N5-BR CD09N6-BR CD09N7-BR CD09N8-BR CD09N9-BR CD09NP-BR CF09N1-BR CF09N2-BR CF09N3-BR CF09N4-BR CF09N5-BR CF09N6-BR CF09N7-BR CF09N8-BR CF09N9-BR CF09NP-BR CD13N1-BR CD13N2-BR CD13N3-BR CD13N4-BR CD13N5-BR CD13N6-BR CD13N7-BR CD13N8-BR CD13N9-BR CD13NP-BR CF13N1-BR CF13N2-BR CF13N3-BR CF13N4-BR CF13N5-BR CF13N6-BR CF13N7-BR CF13N8-BR CF13N9-BR CF13NP-BR CD16N1-BR CD16N2-BR CD16N3-BR CD16N4-BR CD16N5-BR CD16N6-BR CD16N7-BR CD16N8-BR CD16N9-BR CD16N0-BR CD16NP-BR CF16N1-BR CF16N2-BR CF16N3-BR CF16N4-BR CF16N5-BR CF16N6-BR CF16N7-BR CF16N8-BR CF16N9-BR CF16N0-BR CF16NP-BR Dome 3/8" NPT Diameter of Holes No. of Holes mm Solid Insert Solid Insert 4 1.4 2 3.0 5 1.6 2 1.7 10 1.4 6 1.4 3 17 4 1.7 4 2.3 Inches 1.089.0799.19 1/2" NPT 2.0 3.0 4.0 5.0 3.0 5.2 3.8 4.2 2.5 1/2" NPT (Enlarged) 3.0 4.0 4.0 4.0 4.0 6.0 5.6 3.0 3.0 3.8 Solid Insert CD21N1-BR CD21N2-BR CD21N3-BR CD21N4-BR CD21N5-BR CD21N6-BR CD21N7-BR CD21N8-BR CD21N9-BR CD21NP-BR CF21N1-BR CF21N2-BR CF21N3-BR CF21N4-BR CF21N5-BR CF21N6-BR CF21N7-BR CF21N8-BR CF21N9-BR CF21NP-BR CD29N1-BR CD29N2-BR CD29N3-BR CD29N9-BR CD29NP-BR - No. of Holes 4 3 2 4 1 4 3 4/1 2 mm Part Numbers of Inserts Only Inches 6.0 .24 1.089.2100.19 7.0 .28 1.089.2101.19 8.0 .31 1.089.2102.19 5.0 .20 1.089.2103.19 8.0 .31 1.089.2104.19 5.2 .20 1.089.2105.19 5.2 .20 1.089.2106.19 5.2/3.7 .20/.15 1.089.2107.19 7.4 .29 1.089.2108.19 1.089.2199.19 Solid Insert 1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19 .12 .16 .16 .16 .16 .24 .22 .12 .12 .15 1.089.1600.19 mm Inches 1.089.1601.19 5.7 .23 1.089.16C-06 CD16NK-BR 1.089.1602.19 1/2" 1/2" NPT NPT CD16NJ-BR 6.9 .27 1.089.16C-07 1.089.1603.19 1.089.1604.19 *Note: RJ45 Solution has no approval ratings. Reference Diagram on page 24. 1.089.1605.19 Custom Solutions! 1.089.1606.19 * Any custom hole configuration is available for a minimum 1.089.1607.19 order of 1,000 pieces. *1.089.1610.19 * No charge for standard delivery time. 1.089.1909.19 For small quantities we suggest drilling or machining the 1.089.1699.19 inserts yourself, following these guidelines: For Strain Relief Fitting specifications and dimensions refer to page 14. For Material Specifications and Approval Information refer to page 52. "BP" (Billet Plugs) available upon request. www.SealconEX.com Flex** Diameter of Holes .08 .12 .16 .20 .12 .20 .15 .17 .10 *Note: This Insert has slotted holes. **Note: Flex Fittings are not a standard item, assembly required. *Note: CSA and CE Approvals only applies to Dome Fittings. Dome Fittings also available with the following approvals: Dome See page 56 for thread specs Dimensions in Inches (mm) 1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19 Solid Insert 3 3 4 5 6 2 3 6 *4 6 -40F to 212F (-40C to 100C) Thread Type & Size .06 .12 .06 .07 .06 .06 .07 .07 .09 Solid Insert 3 6 3 2 3 2 2 2 2 Part Numbers of Inserts Only Part Numbers Optional Locking Nuts, O-Rings & Other Accessories starting on Page 29 - 40. 3/4" NPT 1" NPT 6 4 4 2 6.5 9.0 9.5 11.0 Solid Insert .26 .35 .37 .43 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2908.19 1.089.2999.19 RJ45 Solution Part Numbers Thread Type -40F to 212F (-40C to 100C) & Size See page 56 for thread specs Dimensions in Inches (mm) Cable Diameter Part Numbers of Inserts Only * We suggest freezing the solid insert before drilling. * Drill holes with insert installed in Strain Relief Fitting as a fixture. * Drill holes by using a standard high-speed steel drill bit of the proper size at approx. 2500 RPM. * Keep a minimum distance of 1 mm (.04 in) between holes. * The outside holes can be located right against the lip of the strain relief body, as sufficient insert material remains between the hole and the body wall due to the design of the cord grip. Important: Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed .04" (1 mm). The Multi Cable fittings will meet NEMA 4x = IP 65 if the design parameters are complied with. To verify a submersible NEMA 6= IP 68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer's expense to an independent test lab. www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specifications may be changed without prior notice 23 Nickel Plated Brass Flex** See page 56 for thread specs Dimensions in Inches (mm)