www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 | Dimensions & Specications may be changed without prior notice
Nickel Plated Brass
For Strain Relief Fitting specifications and dimensions refer to page 14.
*Note: This Insert has slotted holes.
**Note: Flex Fittings are not a standard item, assembly required.
*Note: CSA and CE Approvals only applies to Dome Fittings.
Custom Solutions!
• Any custom hole configuration is available for a minimum
order of 1,000 pieces.
• No charge for standard delivery time.
For small quantities we suggest drilling or machining the
inserts yourself, following these guidelines:
• We suggest freezing the solid insert before drilling.
• Drill holes with insert installed in Strain Relief Fitting as a fixture.
• Drill holes by using a standard high-speed steel drill bit of the
proper size at approx. 2500 RPM.
• Keep a minimum distance of 1 mm (.04 in) between holes.
• The outside holes can be located right against the lip of the strain
relief body, as sufficient insert material remains between the hole
and the body wall due to the design of the cord grip.
Important:
Design Parameters: Cable diameter should not be less than 80% of
hole diameter and the difference between hole and cable diameter
should never exceed .04” (1 mm). The Multi Cable fittings will meet
NEMA 4x = IP 65 if the design parameters are complied with.
To verify a submersible NEMA 6= IP 68 application, the final
assembly of cables and fittings must be tested by the customer or
submitted at the customer’s expense to an independent test lab.
Nickel Plated Brass Liquid Tight Strain Relief Fittings
Multi-Hole - NPT Threads
* *
23
Part Numbers Dimensions in Inches (mm)
Diameter of
Holes
mm
-40°F to 212°F (-40°C to 100°C)
Thread
Type
& Size
See page
56 for
thread
specs
No. of
Holes Inches
Part
Numbers
of
Inserts
Only
Solid Insert
Solid Insert
Solid Insert
Solid Insert
Dome Flex**
Solid Insert
CD07AP-BR 1.089.0799.19CD07AP-BR
CD09N1-BR
CD09N2-BR
CD09N3-BR
CD09N4-BR
CD09N5-BR
CD09N6-BR
CD09N7-BR
CD09N8-BR
CD09N9-BR
CD09NP-BR
CD13N1-BR
CD13N2-BR
CD13N3-BR
CD13N4-BR
CD13N5-BR
CD13N6-BR
CD13N7-BR
CD13N8-BR
CD13N9-BR
CD13NP-BR
CD16N1-BR
CD16N2-BR
CD16N3-BR
CD16N4-BR
CD16N5-BR
CD16N6-BR
CD16N7-BR
CD16N8-BR
CD16N9-BR
CD16N0-BR
CD16NP-BR
4
2
5
2
10
6
3
4
4
1.4
3.0
1.6
1.7
1.4
1.4
17
1.7
2.3
.06
.12
.06
.07
.06
.06
.07
.07
.09
3
6
3
2
3
2
2
2
2
2.0
3.0
4.0
5.0
3.0
5.2
3.8
4.2
2.5
.08
.12
.16
.20
.12
.20
.15
.17
.10
3
3
4
5
6
2
3
6
*4
6
3.0
4.0
4.0
4.0
4.0
6.0
5.6
3.0
3.0
3.8
.12
.16
.16
.16
.16
.24
.22
.12
.12
.15
1.089.0900.19
1.089.0901.19
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
1.089.0908.19
1.089.0999.19
1.089.1300.19
1.089.1301.19
1.089.1302.19
1.089.1303.19
1.089.1304.19
1.089.1305.19
1.089.1306.19
1.089.1307.19
1.089.1308.19
1.089.1399.19
1.089.1600.19
1.089.1601.19
1.089.1602.19
1.089.1603.19
1.089.1604.19
1.089.1605.19
1.089.1606.19
1.089.1607.19
*1.089.1610.19
1.089.1909.19
1.089.1699.19
CF09N1-BR
CF09N2-BR
CF09N3-BR
CF09N4-BR
CF09N5-BR
CF09N6-BR
CF09N7-BR
CF09N8-BR
CF09N9-BR
CF09NP-BR
CF13N1-BR
CF13N2-BR
CF13N3-BR
CF13N4-BR
CF13N5-BR
CF13N6-BR
CF13N7-BR
CF13N8-BR
CF13N9-BR
CF13NP-BR
CF16N1-BR
CF16N2-BR
CF16N3-BR
CF16N4-BR
CF16N5-BR
CF16N6-BR
CF16N7-BR
CF16N8-BR
CF16N9-BR
CF16N0-BR
CF16NP-BR
Part Numbers Dimensions in Inches (mm)
Diameter of
Holes
mm
-40°F to 212°F (-40°C to 100°C)
Thread
Type
& Size
See page
56 for
thread
specs
No. of
Holes Inches
Part
Numbers
of
Inserts
Only
Solid Insert
Dome Flex**
Solid Insert
CD21N1-BR
CD21N2-BR
CD21N3-BR
CD21N4-BR
CD21N5-BR
CD21N6-BR
CD21N7-BR
CD21N8-BR
CD21N9-BR
CD21NP-BR
CD29N1-BR
CD29N2-BR
CD29N3-BR
CD29N9-BR
CD29NP-BR
4
3
2
4
1
4
3
4/1
2
6.0
7.0
8.0
5.0
8.0
5.2
5.2
5.2/3.7
7.4
.24
.28
.31
.20
.31
.20
.20
.20/.15
.29
1.089.2100.19
1.089.2101.19
1.089.2102.19
1.089.2103.19
1.089.2104.19
1.089.2105.19
1.089.2106.19
1.089.2107.19
1.089.2108.19
1.089.2199.19
6
4
4
2
6.5
9.0
9.5
11.0
.26
.35
.37
.43
1.089.2900.19
1.089.2901.19
1.089.2902.19
1.089.2908.19
1.089.2999.19
CF21N1-BR
CF21N2-BR
CF21N3-BR
CF21N4-BR
CF21N5-BR
CF21N6-BR
CF21N7-BR
CF21N8-BR
CF21N9-BR
CF21NP-BR
-
-
-
-
-
For Material Specifications and Approval Information refer to page 52.
“BP” (Billet Plugs) available upon request.
3/8” NPT
1/2” NPT
1/2” NPT
(Enlarged)
PG 7 /
1/4” NPT
3/4” NPT
1” NPT
Dome Fittings also available
with the following approvals:
www.SealconEX.com
RoHS
*Note: RJ45 Solution has no approval ratings. Reference Diagram on page 24.
CD16NK-BR
CD16NJ-BR
1/2” NPT
5.7
6.9
.23
.27
1.089.16C-06
1.089.16C-07
Part Numbers Dimensions in Inches (mm)
Cable Diameter Part
Numbers
of
Inserts
Only
mm Inches
Thread
Type
& Size
See page
56 for
thread
specs
-40°F to 212°F
(-40°C to 100°C)
RJ45 Solution
1/2” NPT
Optional Locking Nuts,
O-Rings & Other
Accessories starting
on Page 29 - 40.
