3MTM MetPakTM 2-FB Socket 2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series * * * * * End-to-end stackable Offset dual-beam contact minimizes insertion force Molded guide fingers provide integrated alignment Alignment wafer for true position Mates with MP2-P inverse headers and elevated inverse headers, MP2-PXXXE, for extended card applications * Protective Push-Cap on Press-Fit Only * Meets IEC 61076-4-104 Futurebus+(R) global standard * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 17, 2013 Physical TS-1117-C Sheet 1 of 4 Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 " [1.27 m) Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Current Rating: Signal: 1.5 A - All contacts simultaneously Insulation Resistance: 103 M Withstanding Voltage: 1000 VAC Environmental Temperature Rating: -55C to +125C Process Temperature Rating: 260C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Socket 2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series "A" 5.00 .197 TYP. 22.42 .883 ROW E D C B A 14.50 .571 POSITION 1 2 33.0 1.30 11.30 .445 13.30 .524 POSITION X 3.75 .148 2.00 .079 4X 13.50 .532 "C" TAIL LENGTH 23.0 .91 PRESS-FIT AND SOLDER TAIL PRODUCT (CAPPED) 2.00 .079 TYP. 21.95 .864 "B" 0.05 .05 .002 .002 23.30 .917 MATED WITH MP2-PXXXE-5XXX-XXXX 23.30 1.50 .917 .059 CENTER LINE OF ROW A mm [inch] Tolerance Unless Noted ASSEMBLED TO PCB AND MATED WITH MP2PXXX-5XXX-XXXX mm 0 0.0 0.00 3 0.3 0.13 [ ] Dimensions for Reference Only Notes: 1. Refer to IEC 61076-4-104 Futurebus+(R) global standard. 2. "Press Fit" describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a "back plane." Ordering Information MP2 - SXXXG - 5XXX - C - XXXXX S = Socket Plating Options (See Table 3) Contact Count (See Table 1) Guide Finger Rows 5 = 5 Rows Contact Arrangement 1 = All rows filled* *Contact 3M Sales Representative for information on special fill patterns and mono blocked pairs 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com Termination Style M = Solder Tail (Press Peg) P = Press-Fit (with Tail Cover) Tail Length (See Table 2) C = Capped Solder Tail Blank = Press-Fit TS-1117-C Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Socket 2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series Table 1 - Connector & Row Lengths Pin Count Dim. "A" mm [inch] Dim "B" mm [inch] Rows Block Count 030 11.95 [0.471] 10.00 [0.394] 5 1 060 23.95 [0.943] 22.00 [0.866] 5 2 090 35.95 [1.415] 34.00 [1.339] 5 3 120 47.95 [1.888] 46.00 [1.811] 5 4 150 59.95 [2.361] 58.00 [2.283] 5 5 180 71.95 [2.833] 70.00 [2.756] 5 6 210 83.95 [3.305] 82.00 [3.228] 5 7 240 95.95 [3.778] 94.00 [3.701] 5 8 Table 2 - Tail Length Contact-to-PC Board Tail Termination Option No. Solder Dim. "C" Press-Fit* 1 4.35 [0.171] 1 3.53 [0.139] *Compliant-Pin Tail Table 3 - Plating & Regulatory Plating Suffix Press-Fit Tails* Solder Tails Plating Composition KR RIA E1 & C1 apply RIA E1 & C1 apply 0.76 m [30 "] Min. Au Contact Area 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over LR RIA E1 & C1 apply RIA E1 & C1 apply 0.08 m [3 "] Min. Au Contact Area 0.67 m [27 "] Min. PdNi Contact Area 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over *Compliant-Pin Tail TS-1117-C Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Socket 2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series 8.00 .315 4.00 .157 2.00 .079 4X 1.00 .039 THESE HOLES CONSTITUTE MODULAR REPEATING PATTERN 2.00 .079 TYP. 4.00 .157 "B" 2.05 +.05 -.00 O 0.10 .081 +.002 -.000 UNPLATED THRU HOLE UNPLATED THROUGH-HOLE O A1 "D" PLATED "D"THROUGH-HOLE PLATED THRU HOLE O 1.50 +.10 -.00 O 0.10 .059 +.004 -.000 UNPLATED THRU HOLE UNPLATED THROUGH-HOLE O 0.10 3.00 .118 RECOMMENDED PCB HOLE MOUNTING PATTERN Table 4 - HOLE PLATING FINISHES HOLE Finished Dia. MM [in] Cu Thickness [mm [in] Immersion Matte Sn Thickness microns ["] Electrolytic Au Thickness microns ["] OSP ENTEK Thickness microns ["] Drilled Hole Dia. mm [in] "D" 0.700-0.800 [.0276-.0315] 0.025-0.045 [0.001-0.002] 0.5 - 2.5 [20 - 100] 0.1 - 0.5 [4 - 20] 0.2 - 0.5 [8 - 20] 0.830-0.860 [.0330.0340] or 0.85 mm [#66] TWIST DRILL TS-1117-C Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. (c) 3M 2013. All rights reserved. RIA-2217B-E