Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
DK
ASCTB177E 201202-T
2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
Characteristics Item Specifications
Contact Arrangement 1 Form A 1 Form A 1 Form B 2 Form A
Contact resistance (Initial) Max. 30 mΩ (By voltage drop 6 V DC 1A)
Contact material Au-flashed AgSnO2 type Au-flashed AgNi type
Rating
Nominal switching capacity (resistive load) 10 A 250 V AC, 10 A 30 V DC 8 A 250 V AC,8 A 30 V DC 8 A 250 V AC,8 A 30 V DC
Max. switching power (resistive load) 2,500VA, 300 W 2,000 VA, 240 W 2,000 VA, 240 W
Max. switching voltage 250 V AC, 125 V DC 250 V AC, 125 V DC 250 V AC, 125 V DC
Max. switching current 10 A 8 A 8 A
Nominal operating power 200 mW
Min. switching capacity (Reference value)*110m A 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdo wn voltage” section.
Breakdown voltage
(Initial) Between open contacts 1,000 Vr ms for 1min. (Detection current: 10mA.)
Between contact and coil 4,000 Vr ms for 1min. (Detection current: 10mA.)
Surge breakdown
voltage*2 (Initial) between contacts and coil 10,000 V
Temperature rise (coil) (at 65°C 149°F)Max. 40°C (By resistive method, nominal voltage applied to the coil; max. switching current)
Operate time [Set time] (at 20°C 68°F)Max. 10 ms (Approx. 5 ms) [10 ms (Approx. 5 ms)]
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20°C 68°F)Max. 8 ms (Approx. 3 ms) [10 ms (Approx. 3 ms)]
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Mechanical
characteristics
Shock resistance Functional Min. 98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Vibration resistance Functional 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10µs.)
Destructive 10 to 55 Hz at double amplitude of 3 mm
Expected life Mechanical Min. 5×107 (at 300 times/min.)
Electrical Min. 105 (resistive load, at 20 times/min., at rated capacity)
Conditions Conditions for operation, transport and storage*3Ambient temperature: –40°C to +65°C –40°F to +149°F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 20 times/min.
Unit weight Approx. 5 g .18 oz Approx. 6 g .21 oz Approx. 6 g .21 oz
1-(1). Maximum operating power (1 Form A) 1-(2). Maximum operating power
(1 Form A 1 Form B, 2 Form A) 2-(1). Life curve (1 Form A)
AC resistive load
DC resistive
load
DC inductive load
(L/R = 7 ms)
AC inductive load
(cosϕ= 0.4)
Contact voltage, V
Contact current, A
10 100 1,000
0.1
1
10
100
Contact voltage, V
Contact current, A
AC resistive load
DC inductive load
(L/R = 7 ms) DC resistive
load
AC inductive load
(cosϕ= 0.4)
0.1
1
5
10
10 100 1,000 012345678910
10
100
1,000
1
Life, ×104
Contact current, A
250 V AC resistive load
30 V DC resistive load
250 V AC inductive load (cosϕ= 0.4)
30 V DC inductive load (L/R = 7 ms)
2-(2). Life curve
(1 Form A 1 Form B, 2 Form A) 3-(1). Operate/Release time (1 Form A)
Tested sample: DK1a-24V, 5 pcs. 3-(2). Operate/Release time
(1 Form A 1 Form B, 2 Form A)
Tested sample: DK1a1b-12V, 5 pcs.
012345678910
10
100
1,000
1
Life, ×104
Contact current, A
250 V AC resistive load
30 V DC resistive load
250 V AC inductive load (cosϕ= 0.4)
30 V DC inductive load (L/R = 7 ms)
80 90 10 110 120 130 140
0
1
2
3
4
5
6
7
8
9
Coil applied voltage,%V
Operate/release time, ms
Release time
(with diode)
Operate time
Release time
x
x
Max.
Min.
Max.
Max.
Min.
Min.
x
80 90 10 110 120 130 140
0
1
2
3
4
5
6
7
8
9
Coil applied voltage,%V
Operate/release time, ms
Min.
Max.
x
Max.
Max.
Min.
Min.
Release time
(with diode)
Operate time
Release time
x
x