The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX15 Series Space saving, Equal length transmission lines Patent pending Termination side: 0.5 mm pitch, 1-row construction Mating side: 1 mm pitch, staggered 2-row construction Contacts consolidated into 1 row for equal length transmission lines Fig.1 Features 1. Space saving Self-alignment of 1.5 mm Large guide post Reduction in space is achieved by designing the contacts in 2-row staggered 1 mm pitch on the mating side and on a single row 0.5 mm pitch on the termination side (Fig. 1). 1.5mm 1.5mm 2. Equal length transmission lines Contact configuration creates equal length transmission lines preventing deterioration of LVDS signal within the connector (Fig.1). Fig.2 3. Different types Availability of types with or without metal shields allows flexibility of applications and cost reduction. Side latch -locks 4. Self alignment and self-guiding Built-in guide posts allow secure self-alignment within 1.5 mm (Fig.2). q 5. Secure and complete mating / unmating Side latch-locks assure and confirm complete and secure mating of plugs to receptacles while permitting ease of disconnection (Fig. 3). 6. Enhanced shielding effectiveness Availability of version with enlarged metal shields (preventing intrusion or emission of the electromagnetic interference) further protects the integrity of LVDS signal (FX15S series, Fig.4) w With metal shields (FX15 and FX15S Series) Without metal shields (FX15M Series) Fig.3 High Shielding Effectivness 0 Emission Noise Level (dBm) 7. RoHS compliant All components and materials comply with the reqirements of EU Directive 2002/95/EC. Applications FPD-TV, FPD panels and other applications requiring secure and reliable connection and transmission signal integrity. Without metal -10 q -20 -30 -40 -50 Fig.4 With metal w 0.1 0.2 0.3 0.5 1 1.5 2 3 Frequency (GHz) 2007.1 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications 0.5A 100V AC Current rating Voltage rating Ratings Item 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Insertion-Extraction force 5. Durability (mating/un-mating) 6. Vibration 7. Shock 8. Humidity 9. Temperature cycle 10. Salt spray Operating temperature range Storage temperature range -55c to +80c (Note 1) -10c to +60c (Note 2) Specification 60 m ohms max. (Note 3) 500 M ohms min. No flashover or insulation breakdown. 0.2N min., 30N max. Conditions 1 mA 100V DC 300V AC/one minute With corresponding connector Contact resistance: 80 m ohms max.(Note 3) 50 cycles No electrical discontinuity of 1 s or more. No electrical discontinuity of 1 s or more. Contact resistance: 80 m ohms max. No damage, cracks, or parts dislocation.(Note 3) Contact resistance: 80 m ohms max. (Note 3) Insulation resistance: 500 M ohms min. Contact resistance: 80 m ohms max. (Note 3) No corrosions Frequency: 10 to 55 Hz, single amplitude of 0.76mm, 2 hours, 3 axis Acceleration of 490m/s2, 11ms durations, sine half-wave waveform, 3 cycles, 3axis. 96 hours at 40c, RH 90% to 95% Temperature : -55c +15c to +35c +85c +15c to +35c Time : 30 5 30 5 (Minutes) 5 cycles 5% water solution for 48 hours. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Includes wire conductor resistance (12mm long). Materials and Finishes Receptacle Insulator Component Material Polyamide Contact Phosphor bronze Metal shields Metal fittings Nickel silver Phosphor bronze Finish Color: Black Contact area: Gold plated Termination area: Tin plated --------------Selective gold flash plated Remarks UL94V-0 ------------------------------------------- Plug Insulator Component Material Polyamide Contact Phosphor bronze Metal shields Metal latch-locks Finish Color: Black Contact area: Gold plated Termination area: Tin plated ----------------------------- Nickel silver Stainless steel Remarks UL94V-0 ------------------------------------------- Ordering information Receptacle FX15 S - 31 S - 0.5 SH 1 2 3 4 5 6 3 Number of contacts 4 Connector type Plug FX15 S - 31 P - C 1 2 3 4 7 Crimp contact FX15 - 3032 PCF A 1 2 1 Series Name 2 Configuration 2 8 9 10 : FX15 Blank : With shields (or crimp contact) 15S : With shields - enhanced shielding 15M : Without shields P S : Male contact : Female contact 5 Contact pitch : 0.5 mm 6 Housing configuration SH : Right angle SV : Straight 7 Termination C : Crimp 8 Applicable conductor 3032 : AWG 30 to 32 9 Packaging PCF : Reel/ plug contact 10 Plating (contact area) A : Gold plated The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series - Mating Diagram Plugs Receptacles With shields-standard- FX15-31P-C Vertical, with shields (FX15-31S-0.5SV) With shields - enhanced shielding (FX15S-**P-C) Right angle, with shields -enhanced shielding (FX15S-**S-0.5SH) Without shields (FX15M-**P-C) Right angle, without shields (FX15M-**S-0.5SH) Crimp contact (FX15-3032-PCFA) 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs With shields (FX15-31P-C) 2.70.1 18.30.3 3.70.3 (13.45) 9.40.3 Polarity mark (27) 24.60.3 22.570.15 No.2 No.1 Part number CL No. Number of contacts RoHS FX15-31P-C CL575-2101-2 31 YES 140.15 P=10.1 No.30 P=10.1 150.15 No.31 Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. With shields, enhanced shielding (FX15S-**P-C) (A) B0.3 C0.15 40.3 (13.45) 9.40.3 2.70.1 3.70.3 D0.3 No.2 No.1 No.n P=10.1 F0.15 No.n+1 Part number CL No. Number of contacts A B C D E F FX15S-31P-C CL575-2106-6 31 27 24.6 22.6 18.3 14 15 FX15S-41P-C CL575-2107-9 41 32 29.6 27.6 23.3 19 20 FX15S-51P-C CL575-2103-8 51 37 34.6 32.6 28.3 24 25 Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. 4 E0.15 P=10.1 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Without shields (FX15M-**P-C) (13.6) (13) 9.550.3 (A) B0.3 4.20.3 C0.3 (D) E0.15 P=10.1 No.2 P=10.1 F0.15 No.1 No.n No.n+1 Part number CL No. Number of contacts A B C D E F G FX15M-21P-C CL575-2109-4 21 24.8 20.5 17.6 13.7 25.8 9 10 FX15M-31P-C CL575-2108-1 31 29.8 25.5 22.6 18.7 30.8 14 15 RoHS YES Note 1: Sold in package containing 100 pieces. Order by package. Note 2: Dimensions in parenthesis ( ) are reference dimensions. Plug crimp contacts Part number CL No. Packaging Quantity Finish RoHS FX15-3032PCFA CL575-2001-8 Reel 20,000 pieces per reel Gold plated YES Applicable cable (Tin plated solid soft strands) Wire strip length: 1.2 to 1.9 mm 0.350.1 1516 and 1571 (Note) 20.15 Note: Refer to crimp condition sheet. Tools Item 0.720.1 0.90.15 AWG #32 (7/0.08 mm) 0.5mm to 0.6mm UL No. Product number CL No. Applicator AP105-FX15-3032 901-4033-1 Press unit CM-105 901-0005-4 0.50.15 AWG #30 (7/0.1 mm) Jacket diameter (7) Applicable wire size (Stranded wire conductor) t=0.150.05 Note: Only HRS tools must be used. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacles Vertical, with shields (FX15-31S-0.5SV) 25.70.3 19.820.2 150.15 P=0.50.1 No.1 No.31 b (6) 5.60.3 40.3 a No.30 (0.8) No.2 e f d 4.80.3 0.90.2 c 1.50.2 10.2 10.2 1.50.2 0.80.1 22.80.3 Part number CL No. Number of contacts RoHS FX15-31S-0.5SV CL575-2201-7 31 YES BRecommended PCB mounting pattern and metal mask dimensions 22.80.05 0.30.03(Land pattern) 0.250.03(Metal mask) 6.7 +0.1 0 3.2 +0.05 0 0 1.5 -0.05 P=0.50.03 0 2.2 -0.1 150.05 2-O1(TH) 2 0.2 +0.1 0 2-O1.4(LND) 0 0.9 -0.1 4.1+0.1 0 0 17.72 -0.1 21.92 +0.1 0 Note 1 :The co-planarity of the terminal leads is as follows: * All signals and shield leads "c" and "d": 0.1mm max. * Shield leads "a", "b", "e" and " f": 0.15 mm max. 2 : Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 3 : Packaged on tape-and-reel, 1000 pieces per reel. 4 : Dimensions in parenthesis ( ) are reference dimensions. 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Right angle with shields -enhanced shielding (FX15S-**S-0.5SH) 4 No.n No.n-1 (4) (3) Polarity mark 4 (2.6) 0.50.1 0.20.05 5 (0.2) 4.450.1 (1.7) A0.2 No.2 No.1 B0.2 C0.15 4.40.3 P=10.1 P=10.1 D0.15 E0.3 Part number HRS No. Number of contacts A B C D E F G H FX15S-31S-0.5SH CL575-2306-5 31 15 27.4 14 15 27.8 28.8 24.8 21.6 FX15S-41S-0.5SH CL575-2307-8 41 20 32.4 19 20 32.8 33.8 29.8 26.6 FX15S-51S-0.5SH CL575-2303-7 51 25 37.4 24 25 37.8 38.8 34.8 31.6 J K L M N P R S 18 15 ------ ------ 13.2 16.8 24.8 40 23 20 5.2 8.8 18.2 21.8 29.8 45 28 25 5.2 8.8 23.2 26.8 34.8 50 RoHS YES BRecommended PCB mounting pattern and metal mask dimensions F +0.05 0 0 G -0.05 0 1.45 -0.05 0.50.03 0 1.7 -0.05 0 J -0.05 K0.05 0.30.03(Land pattern) 0.250.03(Metal mask) 2.2 +0.05 0 3 0 L -0.05 M +0.05 0 0 N23.2 -0.05 P26.8 +0.05 0 2 13.85 4.25 2 3.7 +0.05 3.7 +0.05 0 0 4.15 3.55 +0.05 0 0 2.05 -0.05 H+0.05 0 R 3 2 S Note 1 : The coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : The area marked indicates vacuum pick-and-place area for board placement with automatic equipment. 5 : Vacuum pick-up area 6 : Packaged on tape-and-reel, 1000 pieces per reel. 7 : Dimensions in parenthesis ( ) are reference dimensions. 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Right angle, without shields (FX15M-**S-0.5SH) A0.2 0.50.1 0.20.05 No.n-1 No.n 6.150.3 No.2 No.1 Polarity mark (5.5) Vacuum pick and place area 4.80.3 4.30.3 B0.2 C0.15 P=10.1 P=10.1 D0.15 Part number HRS No. Number of contacts A B FX15M-21S-0.5SH CL575-2309-3 21 10 FX15M-31S-0.5SH CL575-2308-0 31 15 6.550.3 C D E F G 22.4 9 10 17.9 10 35 27.4 14 15 22.9 15 40 BRecommended PCB mounting pattern and metal mask dimensions E0.05 4 3.4+0.05 0 2 14 2 0.30.03(Land pattern) 0.250.03(Metal mask) 0.90.03 0 1.9-0.05 P=0.50.03 0 3.7-0.05 7.4+0.05 0 (1.85) F0.05 2 G Note 1 : The co-planarity of all terminal leads is 0.1 mm max. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Packaged on tape-and-reel, 1000 pieces per reel. 8 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Packaging Specifications Vertical, with shields- (FX15-31S-0.5SV) 44.5 1.750.1 31 (6.3) (4.8) (0.5) Right angle, with shields-enhanced shielding (FX15S-**S-0.5SH) A A A A A 20.250.1 40.450.1 440.3 CL575-2201-7 + 0 0 .1 FX15-31S-0.5SV 120.1 20.15 40.1 5 D O1 . Number of contacts 5 HRS No. O1 . Part number + 0 0 .1 Unreeling direction Unreeling direction (6.7) B C D FX15S-41S-0.5SH CL575-2307-8 41 26.3 52.5 56 56.5 FX15S-51S-0.5SH CL575-2303-7 51 26.3 52.5 56 56.5 40.1 B0.1 C0.3 20.3 40.5 44 44.5 A0.1 A 31 + 0 0 .1 Number of contacts .5 HRS No. (4.7) (0.5) O1 Part number FX15S-31S-0.5SH CL575-2306-5 120.1 Right angle, without shields (FX15M-**S-0.5SH) Unreeling direction (6.5) A B C D 21 20.2 40.4 44 44.5 FX15M-31S-0.5SH CL575-2308-0 31 20.2 40.4 44 44.5 (5.15) (0.5) A0.1 B0.1 C0.3 FX15M-21S-0.5SH CL575-2309-3 120.1 20.1 40.1 0 0 .1 Number of contacts .5 + HRS No. O1 Part number Reel dimensions (D) (O80) (O380) O1 3 0.5 (1.6) 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BRecommended temperature profile 250 230 230c 180c Te mp e r a t u r e ( c ) 180 150 HRS test conditions Test boardGlass epoxy 40mm30mm1mm thick Solder method :Reflow Solder composition :Paste, 96.5%Sn/3%Ag/0.5%Cu Metal mask : 0.12mm thick Reflow cycles : 2 cycles MAX 250c 150c 100 25 0 9030sec. 3010sec. Preheating(150 to 180c) Sodering (230cmin) Time (sec.) The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. BCleaning recommendations Organic solvent cleaning Room temperature cleaning Heated cleaning IPA (Isoporopyl alcohol) Solvent type YES YES HCFC (Hydrochlorofluorocarbon) YES YES Water based cleaning When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes it's affects on metals, platings and plastics. Remove any moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance. 10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BTechnical Information (FX15S Series) Eye Pattern Waveforms (700 MHz) 1 m Cable Length 1.5 m Cable Length Shielding Effectiveness (Shielding Characteristics Comparison Using a 2-chamber Shielded Room) Measured shielding effectiveness for frequencies from 100 MHz to 2 GHz. Shielded connectors show noise suppression of 10 db to 20 dB, when compared with connectors without the shields. 60 With cable-side shields + With PCB-side shields 50 With cable-side shields + Without PCB-side shields 40 Shielding Effect (dB) Without cable-side shields + With PCB-side shields 30 Without cable-side shields + Without PCB-side shields (0 dB line) 20 10 0 -10 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 Frequency (GHz) Notes:The measurement value of "Without plug-side shields + Without receptacle-side shields" are taken as the zero level of the graph vertical axis dB. The respective results express the noise suppression effect (dB) as a relative comparison value with this "without shields" condition as the reference. 11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Precautions and recommendations Wire termination The following documents will be needed in order to perform the cable terminations. 1Basic cable termination and crimp requirements (general explanations). 2Contact crimp termination machine instruction manual (Explanation of the press) 3Applicator parts installation table (Applicator installation explanation) 4Crimp conditions table (Crimp height/Tensile strength standard values) 5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.) * Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents. Insertion of the crimp contacts in the housing Crimp contacts are inserted in the housing as illustrated below. Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing's contact cavity and push the contacts in. Make sure that the contact is fully inserted and the retention tab clears the molded-in lance. Molded-in lance Molded-in lance Retention tab facing up Molded-in lance Retention tab facing down Retention tab Crimp side Verify that the retention tabs clear the molded-in lances as shown on the illustration below. Retention tab Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion. Removal of the contacts Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts. Excersize caution as NOT to damage the molded-in lance. Should the damage occur, the entire housing will need to be replaced. 1 2 12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Precautions and recommendations Packaging of the complete cable assemblies Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be taken NOT to apply any excessive pull forces to the individual wires. When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not interfering with packaging. Packaging Connectors Mating of the connectors The connectors have built-in polarizing feature and will NOT mate when reversed. Do NOT try forced mating. Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-locks are fully engaged. Triangle mark Triangle mark Arrow mark Mating Center mark Mating Center mark 13 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Precautions and recommendations Handling of Connectors after Mating Do not to apply excessive forces to the connectors when routing the cable after mating. Pulling on the entire cable with a force of 20 N or greater can damage the connector. Please take due care not to pull the cable. Un-mating of the connectors Depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the cables! B B 1 Press 1 Press 1 Press 1 Press 2Pull straight apart B Lock latches B B 14 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Precautions and recommendations [ Soldering precautions related to FX15S-**P-C connectors ] Grounding Methods of the ground wire or shields for the cable assemblies 1Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the illustrations below. 2Observe the soldering iron tip temperature and soldering time specified. 3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron. 4Do not splatter the flux from the solder core. Soldering area 2 Soldering area 1 B B (Ground harness examples) 15