130 Catalog E 074482 08/06 Edition 4 www.erni.com
Dimensional drawings and board hole pattern
Vertical Male Connectors Type C For Backplanes
55 signal contacts
25 mm extension module
2
4 x 2 = 8
3.7 1 max
25 max
3
- 0.1
13.45
- 0.1
15.4
1
11
a
b
c
d
z
e
f
2
10 x 2 = 20
compliant zone for thru hole
⭋
0.6`0.0±0.05
Id.-Nr.
date
class
30.6 +
-0.05
2+ 0.05 2
10 x 2 = ( 20 )
2
6 x 2 = ( 12 )
丣
0.1
z
a
b
c
d
e
f
1
11
Board hole pattern
(Component mounting side)
all holes
not plated thru
plated thru
drill hole 0.7
±0.02
The ERmet type C vertical male connector provides 55 sig-
nal contacts and 22 ground shield contacts in 5+2 row x 11
position, fully loaded configuration. With 15 different standard
pin lengths to choose from, this is one of the most versatile
connectors available. The connector is designed for gas
tight pressfit installation.
The ERmet type C vertical male connector incorporates
pre-alignment guides but has no multi function cavity. This
connector is designed to be used alone or in conjunction
with either type B, L, M or N ERmet connectors, however it
can only be installed at the lower end of a connector row.
Note: The numbering on the connectors themselves is in accordance with the IEC 61076-4-101 standard. All dimensions in mm.
Catalog E 074482 08/06 Edition 4 www.erni.com 131
ERmet 2.0mm
Type C Without Shield, With Peg
1110987654321
z
a
b
c
d
e
f
Ordering Information
Vertical Male Connectors Type C For Backplanes
Part NumberUsed ForConfiguration
043138
55
No. of
Pins
Type C Without Shield, With Peg
1110987654321
z
a
b
c
d
e
f
044147
55
Type C With Shield, With Peg
1110987654321
z
a
b
c
d
e
f
053009
77
Contact versions
ERNI can accommodate any pattern of male connector
contact loading.
For shield rows z and f (7 row connectors) or z and y (10
row connectors), level 3 contacts should be specified. For
rear I/O and shrouds, choose contacts with the R1, R2 or
R3 terminal length. Each contact has a unique letter desig-
nation. Use this letter designation when filling in the contact
loading requirements on the ERNI Customer Request Form.
Type C With Shield, Without Peg
1110987654321
z
a
b
c
d
e
f
054546
77
132 Catalog E 074482 08/06 Edition 4 www.erni.com
Ordering Information
Vertical Male Connectors Type C For Backplanes
Part NumberUsed ForConfiguration No. of
Pins
ERNI can accommodate any pattern of male connector
contact loading.
For shield rows z and f (7 row connectors) or z and y (10
row connectors), level 3 contacts should be specified. For
rear I/O and shrouds, choose contacts with the R1, R2 or
R3 terminal length. Each contact has a unique letter desig-
nation. Use this letter designation when filling in the contact
loading requirements on the ERNI Customer Request Form.
Contact versions
Type C Without Shield, With Peg And With Extended Terminals
1110987654321
z
a
b
c
d
e
f
054129
55
Type C With Shield, With Peg And With Extended Terminals
1110987654321
z
a
b
c
d
e
f
064550
77
Type C With Shield, With Peg And With Extended Terminals
1110987654321
z
a
b
c
d
e
f
064572
77
Type C With Shield, With Peg And With Extended Terminals
1110987654321
z
a
b
c
d
e
f
103926
77
