9
4
5
6
7
8
18
17
16
15
14
1B
1A
NC
3Y
3A
V
4B
2Y
GND
NC
SN54LV132A...FK PACKAGE
(TOP VIEW)
CC
NC – No internal connection
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1A
1B
1Y
2A
2B
2Y
GND
VCC
4B
4A
4Y
3B
3A
3Y
4A
NC
4Y
NC
3B
1Y
NC
2A
NC
2B
SN54LV132A...JO OR W PACKAGE
(TOP VIEW)
SN74LV132A...D, DB, DGV, NS, OR PW PACKAGE
10 11 12 13
3 2 1 20 19
SN54LV132A, SN74LV132A
www.ti.com
SCLS394I –APRIL 1999–REVISED JUNE 2010
QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Check for Samples: SN54LV132A,SN74LV132A
1FEATURES
• 2-V to 5.5-V VCC Operation
• Max tpd of9nsat5V
• Typical VOLP (Output Ground Bounce) < 0.8 V
at VCC = 3.3 V, TA= 25°C
• Typical VOHV (Output VOH Undershoot) > 2.3 V
at VCC = 3.3 V, TA= 25°C
• Support Mixed-Mode Voltage Operation on All
Ports
• Latch-Up Performance Exceeds 250 mA Per
JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DESCRIPTION
The 'LV132A devices are quadruple positive-NAND gates designed for 2-V to 5.5-V VCC operation.
The 'LV132A devices perform the Boolean function Y = A • B or Y = A + B in positive logic.
Each circuit functions as a NAND gate, but because of the Schmitt action, it has different input threshold levels
for positive- and negative-going signals.
These circuits are temperature compensated and can be triggered from the slowest of input ramps and still give
clean jitter-free output signals.
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright © 1999–2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
A
B
Y
SN54LV132A, SN74LV132A
SCLS394I –APRIL 1999–REVISED JUNE 2010
www.ti.com
ORDERING INFORMATION(1)
TAPACKAGE(2) ORDERABLE PART NUMBER TOP-SIDE MARKING
Tube of 25 SN74LV132AD
SOIC −D LV132A
Reel of 2500 SN74LV132ADR
SOP −NS Reel of 2000 SN74LV132ANSR 74LV132A
SSOP −DB Reel of 2000 SN74LV132ADBR LV132A
−40°C to 85°C Tube of 90 SN74LV132APW
TSSOP −PW Reel of 2000 SN74LV132APWR LV132A
Reel of 250 SN74LV132APWT
TVSOP −DGV Reel of 2000 SN74LV132ADGVR LV132A
CDIP −J Tube of 25 SNJ54LV132AJ(3) SNJ54LV132AJ
−55°C to 125°C CFP −W Tube of 150 SNJ54LV132AW(3) SNJ54LV132AW
LCCC - FK Tube of 55 SNJ54LV132AFK(3) SNJ54LV132AFK
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(3) Product Preview
FUNCTION TABLE
INPUTS OUTPUT
A B Y
H H L
L X H
X L H
LOGIC DIAGRAM (POSITIVE LOGIC)
2Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): SN54LV132A SN74LV132A
SN54LV132A, SN74LV132A
www.ti.com
SCLS394I –APRIL 1999–REVISED JUNE 2010
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature (unless otherwise noted) MIN MAX UNIT
VCC Supply voltage range –0.5 7 V
VIInput voltage range(2) –0.5 7 V
VOVoltage range applied to any output in the high-impedance or power-off state(2) –0.5 7 V
VOOutput voltage range(2) (3) –0.5 VCC + 0.5 V
IIK Input clamp current VI< 0 –20 mA
IOK Output clamp current VO< 0 –50 mA
IOContinuous output current VO= 0 to VCC ±25 mA
Continuous current through VCC or GND ±50 mA
D package 86
DB package 96
qJA Package thermal impedance(4) DGV package 127 °C/W
NS package 76
PW package 113
Tstg Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value is limited to 5.5 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS(1)
SN54LV132A(2) SN74LV132A UNIT
MIN MAX MIN MAX
VCC Supply voltage 2 5.5 2 5.5 V
VIInput voltage 0 5.5 0 5.5 V
VOOutput voltage 0 VCC 0 VCC V
VCC = 2 V –50 –50 mA
VCC = 2.3 V to 2.7 V –2 –2
IOH High-level output current VCC = 3 V to 3.6 V –6 –6 mA
VCC = 4.5 V to 5.5 V –12 –12
VCC = 2 V 50 50 mA
VCC = 2.3 V to 2.7 V 2 2
IOL Low-level output current VCC = 3 V to 3.6 V 6 6 mA
VCC = 4.5 V to 5.5 V 12 12
TAOperating free-air temperature –55 125 –40 85 °C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
(2) Product Preview
Copyright © 1999–2010, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN54LV132A SN74LV132A
SN54LV132A, SN74LV132A
SCLS394I –APRIL 1999–REVISED JUNE 2010
www.ti.com
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
SN54LV132A(1) SN74LV132A
PARAMETER TEST CONDITIONS VCC UNIT
MIN TYP MAX MIN TYP MAX
2.5 V 1 1.75 1 1.75
VT+
Positive-going input 3.3 V 1.31 2.31 1.31 2.31 V
threshold voltage 5 V 1.95 3.5 1.95 3.5
2.5 V 0.75 1.5 0.75 1.5
VT–
Negative-going input 3.3 V 0.99 2.07 0.99 2.07 V
threshold voltage 5 V 1.5 3.05 1.5 3.05
2.5 V 0.25 1 0.25 1
ΔVT
Hysteresis 3.3 V 0.33 1.32 0.33 1.32 V
(VT+ −VT−)5 V 0.5 2 0.5 2
IOH = –50 mA 2 V to 5.5 V VCC – 0.1 VCC – 0.1
IOH = –2 mA 2.3 V 2 2
VOH V
IOH = –6 mA 3 V 2.48 2.48
IOH = –12 mA 4.5 V 3.8 3.8
IOL = 50 mA 2 V to 5.5 V 0.1 0.1
IOL = 2 mA 2.3 V 0.4 0.4
VOL V
IOL = 6 mA 3 V 0.44 0.44
IOL = 12 mA 4.5 V 0.55 0.55
IIVI= 5.5 V or GND 0 to 5.5 V ±1 ±1 mA
ICC VI= VCC or GND, IO= 0 5.5 V 20 20 mA
Ioff VIor VO= 0 to 5.5 V 0 V 5 5 mA
CiVI= VCC or GND 3.3 V 1.9 1.9 pF
(1) Product Preview
4Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): SN54LV132A SN74LV132A
SN54LV132A, SN74LV132A
www.ti.com
SCLS394I –APRIL 1999–REVISED JUNE 2010
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) (see Figure 1)
TA= 25°C SN54LV132A(1) SN74LV132A
FROM TO LOAD
PARAMETER UNIT
(INPUT) (OUTPUT) CAPACITANCE MIN TYP MAX MIN MAX MIN MAX
CL= 15 pF 7.9(2) 16.5(2) 1(2) 18.5(2) 1 18.5
tpd A or B Y ns
CL= 50 pF 10.8 20.2 1 23 1 23
(1) Product Preview
(2) On products compliant to MIL-PRF-38535, this parameter is not production tested.
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
TA= 25°C SN54LV132A(1) SN74LV132A
FROM TO LOAD
PARAMETER UNIT
(INPUT) (OUTPUT) CAPACITANCE MIN TYP MAX MIN MAX MIN MAX
CL= 15 pF 5.6(2) 11.9(2) 1(2) 14(2) 1 14
tpd A or B Y ns
CL= 50 pF 7.6 15.4 1 17.5 1 17.5
(1) Product Preview
(2) On products compliant to MIL-PRF-38535, this parameter is not production tested.
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
TA= 25°C SN54LV132A(1) SN74LV132A
FROM TO LOAD
PARAMETER UNIT
(INPUT) (OUTPUT) CAPACITANCE MIN TYP MAX MIN MAX MIN MAX
CL= 15 pF 3.9(2) 7.7(2) 1(2) 9(2) 1 9
tpd A or B Y ns
CL= 50 pF 5.3 9.7 1 11 1 11
(1) Product Preview
(2) On products compliant to MIL-PRF-38535, this parameter is not production tested.
NOISE CHARACTERISTICS(1)
VCC = 3.3 V, CL= 50 pF, TA= 25°C SN74LV132A
PARAMETER UNIT
MIN TYP MAX
VOL(P) Quiet output, maximum dynamic VOL 0.21 0.8 V
VOL(V) Quiet output, minimum dynamic VOL –0.09 –0.8 V
VOH(V) Quiet output, minimum dynamic VOH 3.12 V
VIH(D) High-level dynamic input voltage 2.31 V
VIL(D) Low-level dynamic input voltage 0.99 V
(1) Characteristics are for surface-mount packages only.
OPERATING CHARACTERISTICS
TA= 25°C PARAMETER TEST CONDITIONS VCC TYP UNIT
3.3 V 7.5
Cpd Power dissipation capacitance CL= 50 pF, f = 10 MHz pF
5 V 11.2
Copyright © 1999–2010, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): SN54LV132A SN74LV132A
50% VCC
VCC
VCC
0 V
0 V
th
tsu
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
Data Input
tPLH
tPHL
tPHL
tPLH
VOH
VOH
VOL
VOL
VCC
0 V
50% VCC
50% VCC
Input
Out-of-Phase
Output
In-Phase
Output
Timing Input
50% VCC
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Control
Output
Waveform 1
S1 at VCC
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
VOL
VOH
tPZL
tPZH
tPLZ
tPHZ
≈VCC
0 V
50% VCC VOL + 0.3 V
50% VCC
≈0 V
VCC
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
Open Drain
Open
VCC
GND
VCC
TEST S1
VCC
0 V
50% VCC
tw
VOLTAGE WAVEFORMS
PULSE DURATION
Input
NOTES: A. C Lincludes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤1 MHz, ZO= 50 Ω, tr≤3 ns, tf≤3 ns.
D. The outputs are measured one at a time, with one input transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. t PZL and tPZH are the same as ten.
G. tPHL and tPLH are the same as tpd.
H. All parameters and waveforms are not applicable to all devices.
From Output
Under Test
CL
(see Note A)
LOAD CIRCUIT FOR
3-STATE AND OPEN-DRAIN OUTPUTS
S1
VCC
RL= 1 kΩ
GND
From Output
Under Test
CL
(see Note A)
Test
Point
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
Open
50% VCC
50% VCC 50% VCC
50% VCC
50% VCC 50% VCC
50% VCC 50% VCC
VOH 0.3 V
SN54LV132A, SN74LV132A
SCLS394I –APRIL 1999–REVISED JUNE 2010
www.ti.com
PARAMETER MEASUREMENT INFORMATION
Figure 1. Load Circuit and Voltage Waveforms
6Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): SN54LV132A SN74LV132A
PACKAGE OPTION ADDENDUM
www.ti.com 4-Jun-2010
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
SN74LV132AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADBR ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADGVR ACTIVE TVSOP DGV 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADGVRE4 ACTIVE TVSOP DGV 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADGVRG4 ACTIVE TVSOP DGV 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132ANSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
SN74LV132ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
SN74LV132ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
SN74LV132APW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
PACKAGE OPTION ADDENDUM
www.ti.com 4-Jun-2010
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
SN74LV132APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132APWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor
or Sales Office
SN74LV132APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
SN74LV132APWT ACTIVE TSSOP PW 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
SN74LV132APWTE4 ACTIVE TSSOP PW 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
SN74LV132APWTG4 ACTIVE TSSOP PW 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
PACKAGE OPTION ADDENDUM
www.ti.com 4-Jun-2010
Addendum-Page 3
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN74LV132ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
SN74LV132ADGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1
SN74LV132ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN74LV132ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
SN74LV132APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
SN74LV132APWT TSSOP PW 14 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74LV132ADBR SSOP DB 14 2000 367.0 367.0 38.0
SN74LV132ADGVR TVSOP DGV 14 2000 367.0 367.0 35.0
SN74LV132ADR SOIC D 14 2500 367.0 367.0 38.0
SN74LV132ANSR SO NS 14 2000 367.0 367.0 38.0
SN74LV132APWR TSSOP PW 14 2000 367.0 367.0 35.0
SN74LV132APWT TSSOP PW 14 250 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
MECHANICAL DATA
MPDS006C – FEBRUAR Y 1996 – REVISED AUGUST 2000
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE
24 PINS SHOWN
14
3,70
3,50 4,90
5,10
20
DIM
PINS **
4073251/E 08/00
1,20 MAX
Seating Plane
0,05
0,15
0,25
0,50
0,75
0,23
0,13
112
24 13
4,30
4,50
0,16 NOM
Gage Plane
A
7,90
7,70
382416
4,90
5,103,70
3,50
A MAX
A MIN
6,60
6,20
11,20
11,40
56
9,60
9,80
48
0,08
M
0,07
0,40
0°–8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°–ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated