Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP(R) Powerpole(R) Signal, Power & Ground Contacts & Housings The SPEC PakTM Extreme uses rugged and environmentally sealed (IP68) shells to protect APP Powerpole(R) contacts and housings. Customer configured SPEC PakTM Extreme Connectors are capable of up to 320 amps and may be used anywhere a rugged and/or waterproof high power, signal and ground interconnect solution is required. The SPEC PakTM Extreme shell accepts 75 to 180 amp Powerpole(R) contacts. The wide range of Powerpole(R) housing colors and contact sizes, coupled with the available Powerpole(R) holders, offers the user a wide array of design options. Flexibility can be enhanced by replacing a PP120 housing with the PP 15/45 adapter to provide auxiliary signal options. Wire sizes ranging from 20 to 3/0 AWG (0.5 to 85.0 mm) can be accommodated. SPEC PakTM Extreme is highly configurable with thousands of design options in a single interconnect. 1 2 3 4 5 6 9 8 7 8 Powerpole(R) Insert Holders E02 E04 1 - Chemical & UV Resistant Ruggedized Plug Shell 2 - Color Coded Powerpole(R) Housings Match Wire Colors 3 - Power Contacts (up to 310 amps) 4 - Stainless Steel Latches (securing plug to receptacle) 5 - IP68 Interfacial Sealing O-Ring 6 - IP68 Panel Mount Sealing Gasket 7 - Chemical & UV Resistant Ruggedized Panel Mount Receptacle Shell -2- www.andersonpower.com E06 E09 8 - Powerpole(R) Insert Holders (user configurable) * E02 Arrangement - up to two PP180 * E04 Arrangement - up to four PP120 * E06 Arrangement - up to six PP120 (4) & PP75 (2) * E09 Arrangement - up to nine PP75 9 - Industry Standard Sealing (IP68) Components * PG Gland Compatible - Size 42 * Multi-hole Glands For Use With Discrete Wires * Single Hole Glands For Use With Jacketed Cable Specifications Extreme SPEC PakTM Shell / Components Electrical Extreme UL Voltage Rating (AC/DC) Dielectric Withstanding Voltage (AC) Operating Temperature (C ) (F ) Flammability Rating of SPEC PakTM Shells UV Rating (equivalent) 600 3000 -20 to + 105 -4 to 221 UL94 V-0 UL746C F1 Panel Mount Receptacle Plug Mechanical Shell/Latch Mating Cycles Average Connect/Disconnect (lbf) (N) IP Rating Sealing Exceeds IP68, Meets Sealing Requirements of UL50E Crush Test per EIA-364-40B 1,500 37 165 IP68 Pass Material SPEC PakTM - Receptacle, Plug & Holders Latch Latch Retainer Holder Retention Hardware (M8 x 18 & M8 x 25 screws) PG Gland PBT Stainless Steel Stainless Steel NI Plated Steel Extreme Plug Mated To Panel Mount Receptacle Powerpole(R) Contacts PP180 PP120 PP75 PP15/45 & Ground UL Current Rating (Amperes) CSA (30C Rise) (Amperes) Voltage Rating (AC/DC) Contact Barrel Wire Size (AWG) - Power - Ground (mm) - Power - Ground Average Contact Resistance (micro-ohms) Contact Retention Force (lbf) (N) Operating Temperature (C) (F) Flammability Rating Contact Materials Contact Plating 310 230 600 3/0 to 6 85 to 13.3 100 170 756 -20 to 105 -4 to 221 UL94 V-0 Copper Silver 200 155 600 1/0 to 6 53.5 to 13.3 136 100 445 -20 to 105 -4 to 221 UL94 V-0 Copper Silver 75 45 600 6 to 12 13.3 to 3.3 200 50 222 -20 to 105 -4 to 221 UL94 V-0 Copper Silver 15 to 45 10 to 29 600 10 to 20 10 to 14 4.0 to 0.5 4.0 to 1.5 600 25-35 111 -20 to 105 40 to 221 UL94 V-0 Copper Tin or Silver 10,000 20 10,000 8 10,000 5 (Low Detent) 7 (High Detent) 10,000 3 (Low Detent) 5 (High Detent) Polycarbonate Polycarbonate Polycarbonate Polycarbonate Mechanical Mating Cycles - No Load Average Connect/Disconnect (lbf) (single mated pair) Material Powerpole(R) Housing Material NOTE: Agency approvals - TUV Pending / Patents & Patents Pending www.andersonpower.com -3- Part Number Configurator PART NUMBER PLAN SPEC PakTM Series Shell Color Shell Style (1 Fixed Character) (1 Character) (1 Character) S K 2 S = SPEC PakTM Series K = Black PLUG KIT Dash Shell Size - 2 = Panel Mount Receptacle 6 = Straight Plug 9P = Environmental Plug Cover Insert Arrangement (mm) (3 Characters) (3 Characters) 142 142 = 142mm shell E02 Detailed Information Is Available On: E02 = PP180, 2 Pole ........................ Page 7 E04 = PP120 Housing, 4 Pole .......... Page 8 E06 = PP120 (4), PP75 (2), 6 Pole ... Page 9 E09 = PP75, 9 Pole .......................... Page 10 RECEPTACLE KIT Panel Mount Receptacle Shell Plug Shell Powerpole(R) Retaining Pins Powerpole(R) Retaining Pins PLUG COVER IP68 Sealing Cover Panel Mount Receptacle Gasket Latch Powerpole(R) Holder Powerpole(R) Holder Holder Retention Screws Holder Retention Screws Lanyard NOTE: - Panel mount receptacle mounting hardware (8 each 1/4 inch or M6 screw) not included - Recommended torque for panel mount receptacle mounting hardware is 26 to 30 inch - lbs [3 to- 3.4Nm] ORDERING INFORMATION Component Replacement Parts SPEC PakTM Kits Part Number SK2-142E02 SK2-142E04 SK2-142E06 SK2-142E09 -4- Description Receptacle Kit - Panel mount shell with latches - Panel mount gasket - Powerpole(R) holder - 2 pole - Retaining pins - 0.187 x 1.5 - Holder retention screws - M5 x 25 Receptacle Kit - Panel mount shell with latches - Panel mount gasket - Powerpole(R) holder - 4 pole - Retaining pins - 0.187 x 2.0 - Holder retention screws - M5 x 25 Receptacle Kit - Panel mount shell with latches - Panel mount gasket - Powerpole(R) holder - 6 pole - Retaining pins - 0.187 x 2.0 - Retaining pins - 0.187 x 0.87 - Holder retention screws - M5 x 25 Receptacle Kit - Panel mount shell with latches - Panel mount gasket - Powerpole(R) holder - 9 pole - Holder Retention Screws - M5 x 25 www.andersonpower.com Part Number SK6-142E02 Description Plug Kit - Plug shell - Powerpole(R) holder - 2 pole - Retaining pins - 0.187 x 1.5 - Holder retention screws - M5 x 18 SK6-142E04 Plug Kit - Plug shell - Powerpole(R) holder - 4 pole - Retaining pins - 0.187 x 2.0 - Holder retention screws - M5 x 18 SK6-142E06 Plug Kit - Plug shell - Powerpole(R) holder - 6 pole - Retaining pins - Retaining pins - 0.187 x 2.0 - Retaining pins - 0.187 x 0.87 - Holder retention screws - M5 x 18 SK6-142E09 Plug Kit - Plug Shell - Powerpole(R) holder - 9 pole - Holder retention screws - M5 x 18 Part Number H1120P49 H1120P48 111812P12 111812P11 111812P1 114896P1 111812P8 2400G1 Description Screw M5x25 (for use in w/ receptacle) Screw M5x18 (for use in w/ plug) Retaining pin 0.187 x 2.0 Retaining pin 0.187 x 0.87 Retaining pin 0.094 x 0.85 Panel gasket (for use w/ receptacle) Retaining pin 0.187 x 1.5 PP15/45 housing adapter Cover Kit Part Number SK9P-142 Description Plug Protective Cover - Protective sealing (IP68) cover - Lanyard NOTE: Contact factory for receptacle cover. PART NUMBER PLAN Housing Arrangement Wire Protection See page 6 (4 Characters) Dash PS 00 = None PS = Plastic Short PM = Plastic Multi-hole 00 - Contact For more information see pages 7 thru 10 (1 Character) (2 Characters) 0 Dash 00 APP(R) Content - 00 = None 00 - 99 = Various Gland Type Housing Arrangement 0 = Custom Configuration A = AC Single Phase B = AC 3 Phase, 3 Wire C = DC 2 Circuit, 4 wire Q = DC 2 Circuit, 4 wire with 2 power Auxiliary Circuits R = DC 1 Circuit, 2 Wire Z = All Black (3 Characters) A01 * Custom Configurator Available in Insert Arrangement E04 E04 E04 E06 E02 E02, E04, E06 & E09 Contact Code 00 = 11 = 12 = 13 = Wire Size Available in Contact AWG (mm) Insert Arrangement Custom Configuration - Use Next section 5900 #6 (13.3) E06, E09 5952 #8 (8.4) E06, E09 5915 #10/12 (5.3/3.3) E06, E09 20 = 21 = 22 = 23 = 24 = 1323G2 1323G1 1319 1319G4 1319G6 1/0 #1 #2 #4 #6 (53.5) (42.4) (33.6) (21.2) (13.3) E04, E06 E04, E06 E04, E06 E04, E06 E04, E06 80 = 81 = 82 = 83 = 84 = 85 = 86 = 1328G2 1328G1 1382 1347 1383 1384 1348 3/0 2/0 1/0 #1 #2 #4 #6 (85.0) (67.4) (53.5) (42.4) (33.6) (21.2) (13.3) E02 E02 E02 E02 E02 E02 E02 Part Numbering Notes: 1) To order SPEC PakTM Kits only (no internal Powerpole(R) housings or contacts), use part numbering on page 4 only. Plug Kit Example: SK6-142E04. Powerpole(R) housings, contacts and wire protection may be ordered separately, see pages 7 thru 10 for information. 2) To order customer configured SPEC PakTM connectors (including internal Powerpole(R) housings and contacts) use Part Number Plan across the top of pages 4 and 5. Customer Configured SPEC PakTM Plug Connector Example: SK6-142E04PS01-A23. 3) To order a custom configuration which is not listed on page 7 thru 10, use APP(R) custom part number configurator on the APP(R) website, www.andersonpower.com or contact factory. * Custom configurations may not be UL Recognized. www.andersonpower.com -5- Wire Protection - PG Gland SPECIFICATIONS Mechanical Material Shell Gasket Color Torque Requirements Operating Temp IP Rating UV Rating Thread Type Nylon PA 66 (UL94 V-2)* EPDM Black -40C to 105C (-40F to 221F) IP68 Equivalent to UL746C F1 PG Cable Gland Body to Plug Housing - Hand tighten until snug, tighten additional 1/8 - 1/4 turn with wrench Sealing Nut to Cable - Hand tighten until snug, tighten additional 1/2 - 3/4 turn with wrench * Contact factory for UL94 V-0 material NOTE: Only UL listed cable glands are UL recognized components when used with SPEC PakTM connector(s). STRAIGHT PLASTIC SHORT THREAD TYPE - STD PACK 10 / UL LISTED C1 Lock Nut APP(R) P/N PL1P42-19X PS1P42-32X Wire Protection Designation (4 Characters) PS01 PS02 Number Of Holes 1 1 Washer C2 Cable Range Wire Outer Dia. mm (in) 19.5 - 16.0 (0.77 - 0.63) 32.0 - 26.0 (1.26 - 0.79) Body Seal Thread O.D. C1 mm (in) 54 (2.13) 54 (2.13) Sealing Nut Panel Mounting Hole mm (in) 54 - 54.4 (2.13 - 2.14) 54 - 54.4 (2.13 - 2.14) Thread Length C2 mm (in) 15.5 (0.61) 15.5 (0.61) Wrench Size Lock Nut mm 64 64 Wrench Size Sealing Nut mm 62 62 STRAIGHT PLASTIC MULTI-HOLE TYPE - STD PACK 10 / NOT UL LISTED C1 Lock Nut APP(R) P/N PL4P42-10X PL6P42-7X PL8P42-7X Wire Protection Designation (4 Characters) PM46 PM66 PM86 Number Of Holes 4 6 8 Washer Cable Range Wire Outer Dia. mm (in) 10.5 - 8.5 (0.41 - 0.33) 7.0 - 5.0 (0.28 - 0.20) 7.0 - 5.7 (0.28 - 0.22) C2 Body Thread O.D. C1 mm (in) 54 (2.13) 54 (2.13) 54 (2.13) Seal Panel Mounting Hole mm (in) 54 - 54.4 (2.13 - 2.14) 54 - 54.4 (2.13 - 2.14) 54 - 54.4 (2.13 - 2.14) NOTE: Custom PG Glands may be available. Contact customer service for more information. -6- www.andersonpower.com Claw Thread Length C2 mm (in) 15.5 (0.61) 15.5 (0.61) 15.5 (0.61) Sealing Nut Wrench Size Lock Nut (mm) 64 64 64 Wrench Size Sealing Nut (mm) 62 62 62 E02 Insert Arrangement Configured with up to 2 PP180 Contacts (up to 310 amps) Standard & Custom Configuration Options TEMPERATURE CHART HOUSING ARRANGEMENT DC 1 Circuit, 2 Wire R 1381G1 1381G3 All Black Z 50 40 30 20 10 1381G1 1381G1 SPEC PakTM Extreme - E02 Insert Arrangement 2 x PP180 60 Temperature (C) 0 Custom Configuration * 0 0 NOTE: (1) For agency approval, contact factory. * For custom configurations, use APP(R) custom part number configurator at www.andersonpower.com or contact the factory. 80 120 160 200 Amperes 3/0 AWG 240 280 2/0 AWG 2 AWG 1 AWG 320 1/0 AWG 4 AWG POWERPOLE(R) CONTACTS & HOUSINGS FOR E02 INSERT ARRANGEMENT Contact Housings Contacts Contact Code Designation PP180 Contacts 80 81 82 83 84 85 86 Standard Standard Bulk Part Part Number Package Number Bulk Package Description Wire Size (AWG) 1328G2 1328G1 1382 1347 1383 1384 1348 100 100 500 500 500 500 500 Individual Individual Individual Individual Individual Individual Individual 3/0 2/0 1/0 #1 #2 #4 #6 20 20 10 10 10 10 10 1328G2-BK 1328G1-BK 1382-BK 1347-BK 1383-BK 1384-BK 1348-BK Standard Part Number PP180 1381G1 1381 1381G4 1381G3 1381G2 Standard Package Bulk Bulk Part Number Bulk Package Description 10 10 10 10 10 1381G1-BK 1381-BK 1381G4-BK 1381G3-BK 1381G2-BK 250 250 250 250 250 Black Blue Green Red White NOTE: (1) See Powerpole(R) & Mulitpole Power Connectors Catalog for additional contacts and/or housings options. (2) Application tooling information is available on page 11. E02 Powerpole(R) Insert Holder www.andersonpower.com -7- E04 Insert Arrangement Configured with up to 4 PP120 Contacts (up to 200 amps) Standard & Custom Configuration Options TEMPERATURE CHART HOUSING ARRANGEMENT Custom Configuration * SPEC PakTM Extreme - E04 Insert Arrangement 4 x PP120 60 AC Single Phase A 1321G1 1321G4 50 Temperature (C) 0 1321G2 E AC 3 Phase, 3 Wire B 40 30 20 10 1321G2 1321G4 1321G1 1321G3 0 0 40 80 120 160 200 Amperes DC 2 Circuit, 4 Wire C 1321G1 1321G3 1321G1 1321G3 All Black Z 1321G1 1321G1 1/0 AWG 1 AWG 6 AWG 4 AWG 2 AWG NOTE: (1) E = Empty (2) For agency approval, contact factory. * For custom configurations, use APP(R) custom part number configurator at www.andersonpower.com or contact the factory. 1321G1 1321G1 POWERPOLE(R) CONTACTS & HOUSINGS FOR E04 & EO6 INSERT ARRANGEMENTS Contact Housings Contacts Contact Code Standard Standard Bulk Part Designation Part Number Package Number PP 120 Contacts (for E04 & E06 insert arrangement) 20 1323G2 20 1323G2-BK 21 1323G1 20 1323G1-BK 22 1319 20 1319-BK 23 1319G4 20 1319G4-BK 24 1319G6 20 1319G6-BK PP 75 Contacts (for E06 insert arrangement only) 11 5900 25 5900-BK 12 5952 25 5952-BK 13 5915 100 5915-BK E04 Powerpole(R) Insert Holder -8- www.andersonpower.com Bulk Package Wire Size Description (AWG) 100 100 500 500 500 Individual Individual Individual Individual Individual 1/0 #1 #2 #4 #6 1000 1000 1000 Individual Individual Individual #6 #8 #10 to 12 E06 Powerpole(R) Insert Holder Standard Part Number PP 120 Housings 1321G1 1321 1321G4 1321G3 1321G2 Standard Package Bulk Bulk Part Number Package Description 20 20 20 20 20 1321G1-BK 1321-BK 1321G4-BK 1321G3-BK 1321G2-BK 500 500 500 500 500 Black Blue Green Red White PP 75 Housings 5916G4 5916 5916G6 5916G7 5916G5 25 25 25 25 25 5916G4-BK 5916-BK 5916G6-BK 5916G7-BK 5916G5-BK 1000 1000 1000 1000 1000 Black Blue Green Red White NOTE: (1) See Powerpole(R) & Multipole Power Connectors Catalog for additional contacts and/or housings options. (2) Application tooling information is available on page 11. (3) PP15/45 housing adapter (custom configuration) information is available on page 9. E06 Insert Arrangement Configured with up to 4 PP120 & 2 PP75 Contacts (up to 200 amps) Standard & Custom Configuration Options TEMPERATURE CHART HOUSING ARRANGEMENT 0 Custom Configuration * Z 5916 1321G1 1321G3 1321G1 5916G5 1321G3 5916G4 50 40 30 20 10 0 All Black 1321G1 1321G1 60 Temperature (C) Q DC 2 Circuit, 4 Wire With 2 Power Auxiliary Circuits 1321G1 5916G4 1321G1 SPEC PakTM Extreme - E06 Insert Arrangement 4 x PP120 0 40 80 120 160 200 Amperes 1/0 AWG 1 AWG 6 AWG 4 AWG 2 AWG NOTE: (1) For agency approval, contact factory. * For custom configurations, use APP(R) custom part number configurator at www.andersonpower.com or contact the factory. E06 Standard Powerpole(R) Contacts and Housings Options Are Available On Page 8. POWERPOLE(R) CONTACTS & HOUSINGS FOR PP15/45 HOUSING ADAPTER FOR E04 & E06 INSERT ARRANGEMENTS Contact Housings Contacts Part Number PP 15/45 200G1L 200G1L-LPBK 261G2 261G2-LPBK Standard Package Bulk Package Description Wire Size AWG 100 100 5000 5000 - Reeled-LD-Tin Plated Superflex, Sing. Reel-LD-Tin Plated Reeled-HD-Tin Plated Singulated-LD Tin Plate #10 to 20 #10 to 20 #10 to 20 #10 to 20 1331 1331-BK 261G1 261G1-LBBK 100 100 1000 5000 - Individual-LD-Silver Plated Individual-LD-Silver Plated Reeled-LD-Tin Plated Singulated-LD Tin Plate #12 to 16 #12 to 16 #12 to 16 #12 to 16 1332 1332-BK 262G1 262G1-LPBK 100 100 1000 5000 - Individual-LD-Silver Plated Individual-LD-Silver Plated Reel-LD-Silver Plated Singulated-LD Silver Plate #16 to 20 #16 to 20 #16 to 20 #16 to 20 PP 15/45 Ground 1830G1 1830G1-LPBK 1830G2 1830G2-LPBK 100 1000 5000 5000 - Reel-LD-Tin Plated Singulated Reel-LD-Tin Plated Reel-LD-Silver Plated Singulated Reel-LD-Silver Plated #10 to 14 #10 to 14 #10 to 14 #10 to 14 NOTE: (1) See Powerpole(R) & Mulitpole Power Connectors Catalog for additional contacts and/or housings options. (2) Application tooling information is available on page 11. (3) Housing adapter (p/n 2400G1) can be used in place of PP120 housing and contact. Standard Part Number PP 15/45 1327G6FP 1327G8FP 1327G5FP 1327FP 1327G7FP 1327G16FP Standard Bulk Package Part Number Bulk Package Description 100 100 100 100 100 100 1327G6FP-BK 1327G8FP-BK 1327G5FP-BK 1327FP-BK 1327G7FP-BK 1327G16FP-BK 1000 1000 1000 1000 1000 1000 Black Blue Green Red White Yellow 1827G1-BK 1000 Green PP 15/45 Ground 1827G1 100 Powerpole(R) Retaining Pins Powerpole(R) Housing Adapter PP15/45 Powerpole(R) (sold separately) Housing Adapter Part Number 2400G1 www.andersonpower.com -9- E09 Insert Arrangement Configured with up to 9 PP75 Contacts (up to 75 amps) Standard & Custom Configuration Options TEMPERATURE CHART HOUSING ARRANGEMENT 0 Custom Configuration * 5916G4 5916G4 5916G4 70 All Black 5916G4 5916G4 5916G4 Temperature (C) Z SPEC PakTM Extreme - E09 Insert Arrangement 80 5916G4 5916G4 5916G4 60 50 40 30 20 10 0 0 10 20 * For custom configurations, use APP(R) custom part number configurator at www.andersonpower.com or contact the factory. 30 40 Amperes 8 AWG 50 60 POWERPOLE(R) CONTACTS & HOUSINGS FOR E09 INSERT ARRANGEMENT Contact Housings Contacts Contact Code Designation PP75 11 Standard Standard Bulk Part Part Number Package Number Bulk Package Description Wire Size (AWG) 5900 25 5900-BK 1000 Individual #6 12 5952 25 5952-BK 1000 Individual #8 13 5915 100 5915-BK 1000 Individual #10 to 12 Standard Part Number PP75 5916G4 5916 5916G6 5916G7 5916G5 E09 Powerpole(R) Insert Holder NOTE: (1) See Powerpole(R) & Mulitpole Power Connectors Catalog for additional contacts and/or housings options. (2) Application tooling information is available on page 11. (3) Shaded box - 10 - are www.andersonpower.com Standard Package Bulk Bulk Part Number Bulk Package Description 25 25 25 25 25 5916G4-BK 5916-BK 5916G6-BK 5916G7-BK 5916G5-BK 1000 1000 1000 1000 1000 Black Blue Green Red White Tooling Charts APPLICATION TOOLING PP15/45 Contact Tools Contact Loose Piece Part Number PP120 Contact Tools ATS Applicator Contact Part Number N/A N/A 1319 N/A N/A 1319G4 261G1 1385520 1319G6 200G2L-LPBK 200G2L TBD 1323G1 269G2-LPBK 269G2 1385519 1323G2 Hand Tool or 1332 1331 262G1-LPBK Pneumatic Tool 1367G1 1309G2 Reeled Part Number 261G1-LPBK 261G1 1385520 261G2-LPBK 261G2 1385458 269G1 1385520 269G3-LPBK 269G3 1385458 200G1L-LPBK 200G1L 1385460 201G1H-LPBK 201G1H 1385460 1830G1 1385460 1830G2 1385460 269G1-LPBK 1830G1-LPBK 1309G3 1309G6 1830G2-LPBK N/A Contact Part Number 5900 5952 + Hand Tool 1309G4 Contact Part Number 1387G1 5915 Dieless Hydraulic Tool 1388G4 1389G4 1388G3 1389G3 Pneumatic or Bench Tool + 1383 1368 1387G1 1384 + Die + Locator 1388G6 1389G6 1388G7 1388G7 + Locator 1387G1 1387G2 1382 1347 Pneumatic or Bench Tool 1368 Die PP180 Contact Tools 1348 PP75 Contact Tools Dieless Pneumatic Hydraulic Tool or Bench Tool + 1328G1 1328G2 1387G2 Die + 1303G4 Locator 1304G32 1388G3 1389G3 1388G5 1389G5 1303G4 1303G12 1304G32 NOTE: Visit www.andersonpower.com for additional tooling options. 1309 1367G1 1387 1368 www.andersonpower.com - 11 - Dimensions PLUG Top View Side View Mated Side View With Receptacle [ 5.60 ] 142.2 [ 7.00 ] 177.8 [ 7.00 ] 177.8 [ 8.93 ] 226.8 [ 6.88 ] 175.6 [ 9.3 ] 224.6 With Gland [ 5.60 ] 142.2 Front View - E02 Front View - E04 Front View - E06 [ 3.62 ] 91.9 [ 3.62 ] 91.9 [ 5.25 ] 133.3 [ 5.60 ] 142.2 [ 1.32 ] 33.4 MAX PP180 Front View - E09 [ 3.62 ] 91.9 [ 5.25 ] 133.3 [ 5.25 ] 133.3 [ 5.60 ] 142.2 [ 3.62 ] 91.9 [ 5.25 ] 133.3 [ 5.60 ] 142.2 [ 5.60 ] 142.2 RECEPTACLE Top View Side View [ 2.13 ] 54.0 [ 6.89 ] 175 Latch Range [ 0.50 ] 12.7 Panel Cut Out [ 2.098 ] [ 2.800 ] 53.29 71.12 [ 5.05 ] 128.1 [ 4.500 ] 114.30 Front View - E04 [ 5.05 ] 128.1 [ 4.726 ] 120.04 Front View - E06 Front View - E09 [ 5.05 ] 128.1 [ 5.05 ] 128.1 [ 6.89 ] 175 [ 0.275 ] O 6.99 (8) FULL R. [ 3.060 ] 77.72 [ 2.03 ] 51.4 Front View - E02 [ 5.300 ] 134.62 [ 6.89 ] 175 [ 6.89 ] 175 [ 5.05 ] 128.1 [ 6.89 ] 175.0 PLUG COVER KIT Front View Side View [ 159.5 ] 6.28 [ 97.6 ] 3.84 [ 97.6 ] 3.84 A A All Data Subject To Change Without Notice Patents with Patents Pending 14838 DS-EXSPAK REV01 HEADQUARTERS: Anderson Power Products(R), 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products(R) Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 - 12 - www.andersonpower.com TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460 www.andersonpower.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Anderson Power Products: 124G30 111812P11 111812P12 114896P1 2400G1 2-8709P1 3-5964P1 3-5964P2 3-5977P1 3-5977P2 35981P1 3-5986P2 3-5994P1 4802G3 4803G3 B02082G1 H1120P48 H1120P49 PK2-050B04 PL1P42-19X SK2142E02 SK2-142E04 SK2-142E06 SK2-142E09 SK6-142E02 SK6-142E04 SK6-142E06 SK6-142E09 SK9P-142 2-8693P1