www.andersonpower.com
- 2 -
Rugged and Sealed
(IP68) Plugs and Receptacles
For Use with APP® Powerpole® Signal, Power & Ground Contacts & Housings
The SPEC Pak™ Extreme uses rugged and environmentally sealed (IP68) shells to protect APP Powerpole® contacts and housings. Customer
configured SPEC Pak™ Extreme Connectors are capable of up to 320 amps and may be used anywhere a rugged and/or waterproof high power,
signal and ground interconnect solution is required.
The SPEC Pak™ Extreme shell accepts 75 to 180 amp Powerpole® contacts. The wide range of Powerpole® housing colors and contact sizes,
coupled with the available Powerpole® holders, offers the user a wide array of design options. Flexibility can be enhanced by replacing a PP120
housing with the PP 15/45 adapter to provide auxiliary signal options. Wire sizes ranging from 20 to 3/0 AWG (0.5 to 85.0 mm²) can be accommo-
dated. SPEC Pak™ Extreme is highly configurable with thousands of design options in a single interconnect.
Powerpole® Insert Holders
E02 E04 E06 E09
8
1 - Chemical & UV Resistant Ruggedized Plug Shell
2 - Color Coded Powerpole® Housings Match Wire Colors
3 - Power Contacts (up to 310 amps)
4 - Stainless Steel Latches (securing plug to receptacle)
5 - IP68 Interfacial Sealing O-Ring
6 - IP68 Panel Mount Sealing Gasket
7 - Chemical & UV Resistant Ruggedized Panel Mount
Receptacle Shell
8 - Powerpole® Insert Holders (user configurable)
• E02 Arrangement - up to two PP180
• E04 Arrangement - up to four PP120
• E06 Arrangement - up to six PP120 (4) & PP75 (2)
• E09 Arrangement - up to nine PP75
9 - Industry Standard Sealing (IP68) Components
• PG Gland Compatible - Size 42
• Multi-hole Glands For Use With Discrete Wires
• Single Hole Glands For Use With Jacketed Cable
8
45
6
7
321
9
Specications
www.andersonpower.com - 3 -
Extreme SPEC Pak™ Shell / Components
Electrical Extreme
UL Voltage Rating (AC/DC) 600
Dielectric Withstanding Voltage (AC) 3000
Operating Temperature (°C ) -20 to + 105
(°F ) -4 to 221
Flammability Rating of SPEC Pak™ Shells UL94 V-0
UV Rating (equivalent) UL746C F1
Mechanical
Shell/Latch Mating Cycles 1,500
Average Connect/Disconnect (lbf) 37
(N) 165
IP Rating IP68
Sealing Exceeds IP68, Meets Sealing Requirements of UL50E
Crush Test per EIA-364-40B Pass
Material
SPEC Pak™ - Receptacle, Plug & Holders PBT
Latch Stainless Steel
Latch Retainer Stainless Steel
Holder Retention Hardware (M8 x 18 & M8 x 25 screws) NI Plated Steel
Powerpole® Contacts PP180 PP120 PP75 PP15/45 & Ground
UL Current Rating (Amperes) 310 200 75 15 to 45
CSA (30C Rise) (Amperes) 230 155 45 10 to 29
Voltage Rating (AC/DC) 600 600 600 600
Contact Barrel Wire Size (AWG) - Power 3/0 to 6 1/0 to 6 6 to 12 10 to 20
- Ground - - - 10 to 14
(mm²) - Power 85 to 13.3 53.5 to 13.3 13.3 to 3.3 4.0 to 0.5
- Ground - - - 4.0 to 1.5
Average Contact Resistance (micro-ohms) 100 136 200 600
Contact Retention Force (lbf) 170 100 50 25-35
(N) 756 445 222 111
Operating Temperature (°C) -20 to 105 -20 to 105 -20 to 105 -20 to 105
(°F) -4 to 221 -4 to 221 -4 to 221 40 to 221
Flammability Rating UL94 V-0 UL94 V-0 UL94 V-0 UL94 V-0
Contact Materials Copper Copper Copper Copper
Contact Plating Silver Silver Silver Tin or Silver
Mechanical
Mating Cycles - No Load 10,000 10,000 10,000 10,000
Average Connect/Disconnect (lbf) 20 8 5 (Low Detent) 3 (Low Detent)
(single mated pair) 7 (High Detent) 5 (High Detent)
Material
Powerpole® Housing Material Polycarbonate Polycarbonate Polycarbonate Polycarbonate
NOTE: Agency approvals - TUV Pending
/ Patents & Patents Pending
Extreme Plug
Mated To Panel Mount Receptacle
Plug
Panel Mount Receptacle
PG Gland
Part Number Confi gurator
PART NUMBER PLAN
www.andersonpower.com
- 4 -
ORDERING INFORMATION
NOTE:
- Panel mount receptacle mounting hardware (8 each ¼ inch or M6 screw) not included
- Recommended torque for panel mount receptacle mounting hardware is 26 to 30 inch - lbs [3 to- 3.4Nm]
S K 2 - 142 E02
S = SPEC Pak™ Series K = Black 2 = Panel Mount Receptacle 142 = 142mm shell Detailed Information
6 = Straight Plug Is Available On:
9P = Environmental Plug Cover E02 = PP180, 2 Pole ........................ Page 7
E04 = PP120 Housing, 4 Pole .......... Page 8
E06 = PP120 (4), PP75 (2), 6 Pole ... Page 9
E09 = PP75, 9 Pole .......................... Page 10
SPEC Pak™ Series Shell Color Shell Style Shell Size Insert Arrangement
(1 Fixed Character) (1 Character) (1 Character) Dash (mm) (3 Characters) (3 Characters)
Lanyard
IP68 Sealing Cover
RECEPTACLE KIT
PLUG COVER
PLUG KIT
Panel Mount
Receptacle
Gasket
Component Replacement Parts
Part
Number Description
H1120P49 Screw M5x25 (for use in w/ receptacle)
H1120P48 Screw M5x18 (for use in w/ plug)
111812P12 Retaining pin 0.187 x 2.0
111812P11 Retaining pin 0.187 x 0.87
111812P1 Retaining pin 0.094 x 0.85
114896P1 Panel gasket (for use w/ receptacle)
111812P8 Retaining pin 0.187 x 1.5
2400G1 PP15/45 housing adapter
Cover Kit
Part
Number Description
SK9P-142 Plug Protective Cover
- Protective sealing (IP68) cover
- Lanyard
SPEC Pak™ Kits
Part
Number Description
SK2-142E02 Receptacle Kit
- Panel mount shell with latches
- Panel mount gasket
- Powerpole® holder - 2 pole
- Retaining pins - 0.187 x 1.5
- Holder retention screws - M5 x 25
SK2-142E04 Receptacle Kit
- Panel mount shell with latches
- Panel mount gasket
- Powerpole® holder - 4 pole
- Retaining pins - 0.187 x 2.0
- Holder retention screws - M5 x 25
SK2-142E06 Receptacle Kit
- Panel mount shell with latches
- Panel mount gasket
- Powerpole® holder - 6 pole
- Retaining pins - 0.187 x 2.0
- Retaining pins - 0.187 x 0.87
- Holder retention screws - M5 x 25
SK2-142E09 Receptacle Kit
- Panel mount shell with latches
- Panel mount gasket
- Powerpole® holder - 9 pole
- Holder Retention Screws - M5 x 25
Part
Number Description
SK6-142E02 Plug Kit
- Plug shell
- Powerpole® holder - 2 pole
- Retaining pins - 0.187 x 1.5
- Holder retention screws - M5 x 18
SK6-142E04 Plug Kit
- Plug shell
- Powerpole® holder - 4 pole
- Retaining pins - 0.187 x 2.0
- Holder retention screws - M5 x 18
SK6-142E06 Plug Kit
- Plug shell
- Powerpole® holder - 6 pole
- Retaining pins
- Retaining pins - 0.187 x 2.0
- Retaining pins - 0.187 x 0.87
- Holder retention screws - M5 x 18
SK6-142E09 Plug Kit
- Plug Shell
- Powerpole® holder - 9 pole
- Holder retention screws - M5 x 18
Powerpole®
Holder
Plug Shell
Holder
Retention Screws
Powerpole®
Retaining Pins
Holder
Retention Screws
Powerpole® Holder
Panel Mount
Receptacle Shell
Latch
NOTE: Contact factory for receptacle cover.
Powerpole®
Retaining Pins
PART NUMBER PLAN
www.andersonpower.com - 5 -
Housing
Wire Protection Arrangement Contact
See page 6 For more information see pages 7 thru 10 APP® Content
(4 Characters) Dash (1 Character) (2 Characters) Dash (3 Characters)
Part Numbering Notes:
1) To order SPEC Pak™ Kits only (no internal Powerpole® housings or contacts), use part numbering on page 4 only. Plug Kit Example:
SK6-142E04. Powerpole® housings, contacts and wire protection may be ordered separately, see pages 7 thru 10 for information.
2) To order customer configured SPEC Pak™ connectors (including internal Powerpole® housings and contacts) use Part Number Plan across
the top of pages 4 and 5. Customer Configured SPEC Pak™ Plug Connector Example: SK6-142E04PS01-A23.
3) To order a custom configuration which is not listed on page 7 thru 10, use APP® custom part number configurator on the APP® website,
www.andersonpower.com or contact factory.
* Custom configurations may not be UL Recognized.
PS 00 - 0 00 - A01
00 = None 00 = None * Custom
PS = Plastic Short 00 - 99 = Various Gland Type Configurator
PM = Plastic Multi-hole Contact Wire Size Available in
Code Contact AWG (mm²) Insert Arrangement
00 = Custom Configuration - Use Next section
11 = 5900 #6 (13.3) E06, E09
12 = 5952 #8 (8.4) E06, E09
13 = 5915 #10/12 (5.3/3.3) E06, E09
20 = 1323G2 1/0 (53.5) E04, E06
21 = 1323G1 #1 (42.4) E04, E06
22 = 1319 #2 (33.6) E04, E06
23 = 1319G4 #4 (21.2) E04, E06
24 = 1319G6 #6 (13.3) E04, E06
80 = 1328G2 3/0 (85.0) E02
81 = 1328G1 2/0 (67.4) E02
82 = 1382 1/0 (53.5) E02
83 = 1347 #1 (42.4) E02
84 = 1383 #2 (33.6) E02
85 = 1384 #4 (21.2) E02
86 = 1348 #6 (13.3) E02
Available in
Housing Arrangement Insert Arrangement
0 = Custom Configuration -
A = AC Single Phase E04
B = AC 3 Phase, 3 Wire E04
C = DC 2 Circuit, 4 wire E04
Q = DC 2 Circuit, 4 wire with E06
2 power Auxiliary Circuits
R = DC 1 Circuit, 2 Wire E02
Z = All Black E02, E04, E06 & E09
Wire Protection - PG Gland
www.andersonpower.com
- 6 -
Material
Shell Nylon PA 66 (UL94 V-2)*
Gasket EPDM
Color Black
SPECIFICATIONS
Torque Requirements
Cable Gland Body to Plug Housing
- Hand tighten until snug, tighten additional 1/8 - 1/4 turn with wrench
Sealing Nut to Cable
- Hand tighten until snug, tighten additional 1/2 - 3/4 turn with wrench
* Contact factory for UL94 V-0 material
NOTE: Only UL listed cable glands are UL recognized components when used with SPEC Pak™ connector(s).
STRAIGHT PLASTIC SHORT THREAD TYPE - STD PACK 10 / UL LISTED
Wire Protection Cable Range Thread Panel Thread Wrench Wrench
Designation Number Wire Outer O.D. C1 Mounting Length Size Lock Size Sealing
APP® P/N (4 Characters) Of Holes Dia. mm (in) mm (in) Hole mm (in) C2 mm (in) Nut mm Nut mm
PL1P42-19X PS01 1 19.5 - 16.0 (0.77 - 0.63) 54 (2.13) 54 - 54.4 (2.13 - 2.14) 15.5 (0.61) 64 62
PS1P42-32X PS02 1 32.0 - 26.0 (1.26 - 0.79) 54 (2.13) 54 - 54.4 (2.13 - 2.14) 15.5 (0.61) 64 62
STRAIGHT PLASTIC MULTI-HOLE TYPE - STD PACK 10 / NOT UL LISTED
Wire Protection Cable Range Thread Panel Thread Wrench Wrench
Designation Number Wire Outer O.D. C1 Mounting Length Size Lock Size Sealing
APP® P/N (4 Characters) Of Holes Dia. mm (in) mm (in) Hole mm (in) C2 mm (in) Nut (mm) Nut (mm)
PL4P42-10X PM46 4 10.5 - 8.5 (0.41 - 0.33) 54 (2.13) 54 - 54.4 (2.13 - 2.14) 15.5 (0.61) 64 62
PL6P42-7X PM66 6 7.0 - 5.0 (0.28 - 0.20) 54 (2.13) 54 - 54.4 (2.13 - 2.14) 15.5 (0.61) 64 62
PL8P42-7X PM86 8 7.0 - 5.7 (0.28 - 0.22) 54 (2.13) 54 - 54.4 (2.13 - 2.14) 15.5 (0.61) 64 62
Washer Body Seal Sealing Nut
C1
C2
Lock Nut
C1
C2
Washer Body Seal Claw Sealing Nut
Lock Nut
Mechanical
Operating Temp -40°C to 105°C (-40°F to 221°F)
IP Rating IP68
UV Rating Equivalent to UL746C F1
Thread Type PG
NOTE: Custom PG Glands may be available. Contact customer service for more information.
E02 Insert Arrangement
Congured with up to 2 PP180 Contacts (up to 310 amps)
Standard & Custom Conguration Options
www.andersonpower.com - 7 -
Custom Configuration *
R
0
Z
1381G1 1381G3
1381G1 1381G1
DC 1 Circuit, 2 Wire
All Black
TEMPERATURE
CHART
HOUSING
ARRANGEMENT
SPEC Pak™ Extreme - E02 Insert Arrangement
2 x PP180
Temperature (°C)
Amperes
0
10
20
30
40
50
60
0 80 120 160 200 240 280 320
3/0 AWG 2/0 AWG
1 AWG 2 AWG
1/0 AWG
4 AWG
Contact Housings
Standard Standard Bulk Bulk Bulk
Part Number Package Part Number Package Description
PP180
1381G1 10 1381G1-BK 250 Black
1381 10 1381-BK 250 Blue
1381G4 10 1381G4-BK 250 Green
1381G3 10 1381G3-BK 250 Red
1381G2 10 1381G2-BK 250 White
Contacts
Contact Code Standard Standard Bulk Part Bulk Wire Size
Designation Part Number Package Number Package Description (AWG)
PP180 Contacts
80 1328G2 20 1328G2-BK 100 Individual 3/0
81 1328G1 20 1328G1-BK 100 Individual 2/0
82 1382 10 1382-BK 500 Individual 1/0
83 1347 10 1347-BK 500 Individual #1
84 1383 10 1383-BK 500 Individual #2
85 1384 10 1384-BK 500 Individual #4
86 1348 10 1348-BK 500 Individual #6
NOTE:
(1) See Powerpole® & Mulitpole Power Connectors
Catalog for additional contacts and/or housings options.
(2) Application tooling information is available on page 11.
NOTE:
(1) For agency approval, contact factory.
* For custom configurations, use APP® custom part number
configurator at www.andersonpower.com or contact the factory.
POWERPOLE® CONTACTS & HOUSINGS FOR E02 INSERT ARRANGEMENT
E02 Powerpole®
Insert Holder
E04 Insert Arrangement
Confi gured with up to 4 PP120 Contacts (up to 200 amps)
Standard & Custom Confi guration Options
www.andersonpower.com
- 8 -
Custom Configuration *
A
0
B
1321G1 1321G2
E
1321G4
1321G1 1321G2
1321G3 1321G4
AC Single Phase
AC 3 Phase, 3 Wire
DC 2 Circuit, 4 Wire
All Black
C
Z
1321G1 1321G1
1321G3
1321G3
1321G1 1321G1
1321G1 1321G1
TEMPERATURE
CHART
HOUSING
ARRANGEMENT
SPEC Pak™ Extreme - E04 Insert Arrangement
4 x PP120
Temperature (°C)
Amperes
0
10
20
30
40
50
60
0 40 80 120 160 200
1/0 AWG 1 AWG
2 AWG 4 AWG 6 AWG
Contacts
Contact Code Standard Standard Bulk Part Bulk Wire Size
Designation Part Number Package Number Package Description (AWG)
PP 120 Contacts (for E04 & E06 insert arrangement)
20 1323G2 20 1323G2-BK 100 Individual 1/0
21 1323G1 20 1323G1-BK 100 Individual #1
22 1319 20 1319-BK 500 Individual #2
23 1319G4 20 1319G4-BK 500 Individual #4
24 1319G6 20 1319G6-BK 500 Individual #6
PP 75 Contacts (for E06 insert arrangement only)
11 5900 25 5900-BK 1000 Individual #6
12 5952 25 5952-BK 1000 Individual #8
13 5915 100 5915-BK 1000 Individual #10 to 12
Contact Housings
Standard Standard Bulk Bulk
Part Number Package Part Number Package Description
PP 120 Housings
1321G1 20 1321G1-BK 500 Black
1321 20 1321-BK 500 Blue
1321G4 20 1321G4-BK 500 Green
1321G3 20 1321G3-BK 500 Red
1321G2 20 1321G2-BK 500 White
PP 75 Housings
5916G4 25 5916G4-BK 1000 Black
5916 25 5916-BK 1000 Blue
5916G6 25 5916G6-BK 1000 Green
5916G7 25 5916G7-BK 1000 Red
5916G5 25 5916G5-BK 1000 White
NOTE:
(1) See Powerpole® & Multipole Power Connectors Catalog for
additional contacts and/or housings options.
(2) Application tooling information is available on page 11.
(3) PP15/45 housing adapter (custom configuration) information is
available on page 9.
POWERPOLE® CONTACTS & HOUSINGS FOR E04 & EO6 INSERT ARRANGEMENTS
E04 Powerpole®
Insert Holder
E06 Powerpole®
Insert Holder
NOTE:
(1) E = Empty
(2) For agency approval, contact factory.
* For custom configurations, use APP® custom part number configurator at www.andersonpower.com
or contact the factory.
E06 Insert Arrangement
Confi gured with up to 4 PP120 & 2 PP75 Contacts (up to 200 amps)
Standard & Custom Confi guration Options
www.andersonpower.com - 9 -
Custom Configuration *
Q
0
Z
TEMPERATURE
CHART
HOUSING
ARRANGEMENT
DC 2 Circuit, 4 Wire With 2
Power Auxiliary Circuits
All Black
1321G1 1321G1
1321G3
1321G3
5916 5916G5
1321G1 1321G1
1321G1
1321G1
5916G4 5916G4
SPEC Pak™ Extreme - E06 Insert Arrangement
4 x PP120
Temperature (°C)
Amperes
0
10
20
30
40
50
60
0 40 80 120 160 200
1/0 AWG 1 AWG
2 AWG 4 AWG 6 AWG
Contacts
Part Standard Bulk Wire Size
Number Package Package Description AWG
PP 15/45
200G1L - 5000 Reeled-LD-Tin Plated #10 to 20
200G1L-LPBK 100 - Superflex, Sing. Reel-LD-Tin Plated #10 to 20
261G2 - 5000 Reeled-HD-Tin Plated #10 to 20
261G2-LPBK 100 - Singulated-LD Tin Plate #10 to 20
1331 100 - Individual-LD-Silver Plated #12 to 16
1331-BK - 1000 Individual-LD-Silver Plated #12 to 16
261G1 - 5000 Reeled-LD-Tin Plated #12 to 16
261G1-LBBK 100 - Singulated-LD Tin Plate #12 to 16
1332 100 - Individual-LD-Silver Plated #16 to 20
1332-BK - 1000 Individual-LD-Silver Plated #16 to 20
262G1 - 5000 Reel-LD-Silver Plated #16 to 20
262G1-LPBK 100 - Singulated-LD Silver Plate #16 to 20
PP 15/45 Ground
1830G1 - 5000 Reel-LD-Tin Plated #10 to 14
1830G1-LPBK 100 - Singulated Reel-LD-Tin Plated #10 to 14
1830G2 - 5000 Reel-LD-Silver Plated #10 to 14
1830G2-LPBK 1000 - Singulated Reel-LD-Silver Plated #10 to 14
Contact Housings
Standard Standard Bulk Bulk
Part Number Package Part Number Package Description
PP 15/45
1327G6FP 100 1327G6FP-BK 1000 Black
1327G8FP 100 1327G8FP-BK 1000 Blue
1327G5FP 100 1327G5FP-BK 1000 Green
1327FP 100 1327FP-BK 1000 Red
1327G7FP 100 1327G7FP-BK 1000 White
1327G16FP 100 1327G16FP-BK 1000 Yellow
PP 15/45 Ground
1827G1 100 1827G1-BK 1000 Green
NOTE:
(1) See Powerpole® & Mulitpole Power Connectors
Catalog for additional contacts and/or housings options.
(2) Application tooling information is available on page 11.
(3) Housing adapter (p/n 2400G1) can be used in place of
PP120 housing and contact.
Housing Adapter
Part Number 2400G1
POWERPOLE® CONTACTS & HOUSINGS FOR PP15/45 HOUSING ADAPTER
FOR E04 & E06 INSERT ARRANGEMENTS
E06 Standard Powerpole
®
Contacts and Housings Options Are Available On Page 8.
NOTE:
(1) For agency approval, contact factory.
* For custom configurations, use APP® custom part number
configurator at www.andersonpower.com or contact the factory.
Powerpole®
Housing Adapter
PP15/45 Powerpole®
(sold separately)
Powerpole®
Retaining Pins
E09 Insert Arrangement
Confi gured with up to 9 PP75 Contacts (up to 75 amps)
Standard & Custom Confi guration Options
www.andersonpower.com
- 10 -
Custom Configuration *
0
Z
POWERPOLE® CONTACTS & HOUSINGS FOR E09 INSERT ARRANGEMENT
TEMPERATURE
CHART
HOUSING
ARRANGEMENT
All Black
5916G4 5916G4
5916G4 5916G4
5916G4
5916G4
SPEC Pak™ Extreme - E09 Insert Arrangement
Temperature (°C)
Amperes
0
10
20
30
40
50
60
70
80
0 10 20 30 40 50 60
8 AWG
Contact Housings
Standard Standard Bulk Bulk Bulk
Part Number Package Part Number Package Description
PP75
5916G4 25 5916G4-BK 1000 Black
5916 25 5916-BK 1000 Blue
5916G6 25 5916G6-BK 1000 Green
5916G7 25 5916G7-BK 1000 Red
5916G5 25 5916G5-BK 1000 White
Contacts
Contact Code Standard Standard Bulk Part Bulk Wire Size
Designation Part Number Package Number Package Description (AWG)
PP75
11 5900 25 5900-BK 1000 Individual #6
12 5952 25 5952-BK 1000 Individual #8
13 5915 100 5915-BK 1000 Individual #10 to 12
E09 Powerpole®
Insert Holder
* For custom configurations, use APP® custom part number
configurator at www.andersonpower.com or contact the factory.
NOTE:
(1) See Powerpole® & Mulitpole Power Connectors Catalog for additional contacts and/or housings options.
(2) Application tooling information is available on page 11.
(3) Shaded box are
5916G4
5916G4
5916G4
Tooling Charts
www.andersonpower.com - 11 -
APPLICATION TOOLING
Contact
Part Number
Dieless
Hydraulic
Tool or
Pneumatic
Bench Tool + Die + Locator
1387G2
1383
1348
1347
1384
1328G1
1328G2
1389G5
1387G2 1303G4 1304G32
1303G12
1382
1368
1303G4 1304G32
1387G1 1388G3 1389G3
1388G5
PP120 Contact Tools
PP180 Contact Tools
Contact
Part Number
Dieless
Hydraulic Tool or
Pneumatic
Bench Tool + Die + Locator
1319
1319G4
1319G6
1323G1
1323G2
1389G4
1388G3 1389G3
1368 1387G1
1388G4
Part Number + Hand Tool or
Pneumatic
Bench Tool + Die + Locator
5900
5952
5915
1389G6
1388G7 1388G7
1309G4 1387G1 1388G6
Part Number Hand Tool or
Pneumatic
Tool
Reeled Part
Number ATS Applicator
1332 N/A N/A
1331 N/A N/A
262G1-LPBK 261G1 1385520
200G2L-LPBK 200G2L TBD
269G2-LPBK 269G2 1385519
261G1-LPBK 261G1 1385520
261G2-LPBK 261G2 1385458
269G1-LPBK 269G1 1385520
269G3-LPBK 269G3 1385458
200G1L-LPBK 200G1L 1385460
201G1H-LPBK 201G1H 1385460
1830G1-LPBK 1830G1
1830G2-LPBK 1830G2 1385460
1309G2
1367G1
N/A
1309G3
1309G6
PP15/45 Contact Tools
PP75 Contact Tools
NOTE: Visit www.andersonpower.com for additional tooling options.
1385460
Contact
Contact
Loose Piece
1309 1367G1 1387 1368
www.andersonpower.com
- 12 -
Dimensions
All Data Subject To Change Without Notice Patents with Patents Pending 14838 DS-EXSPAK REV01
www.andersonpower.comwww.andersonpower.com
- 12 -- 12 -
HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700
EUROPE: Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203
ASIA / PACIFIC: IDEAL Anderson Asia Pacifi c Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036
CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218
TAIWAN: IDEAL Anderson Asia Pacifi c Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460
www.andersonpower.com
PLUG
Top View Side View Mated Side View
With Receptacle
Front View - E02 Front View - E04 Front View - E06 Front View - E09
Top View Side View Panel Cut Out
Front View - E02 Front View - E04 Front View - E06 Front View - E09
Front View Side View
[ 5.25 ]
133.3
[ 3.62 ]
91.9
[ 5.60 ]
142.2
[ 5.25 ]
133.3
[ 3.62 ]
91.9
[ 7.00 ]
177.8
[ 5.60 ]
142.2
[ 5.25 ]
133.3
[ 3.62 ]
91.9
[ 5.60 ]
142.2
[ 6.89 ]
175
[ 5.05 ]
128.1
[ 6.89 ]
175
[ 5.05 ]
128.1
[ 6.89 ]
175
[ 5.05 ]
128.1
[ 6.89 ]
175
[ 5.300 ]
134.62
[ 2.098 ]
53.29
[ 2.800 ]
71.12
[ 3.060 ]
77.72
[ 4.500 ]
114.30
FULL R.
[ 4.726 ]
120.04
[ 0.275 ]
Ø 6.99 (8)
RECEPTACLE
PLUG COVER KIT
[ 8.93 ]
226.8
[ 5.60 ]
142.2
[ 97.6 ]
3.84
[ 3.62 ]
91.9
[ 5.05 ]
128.1
[ 6.89 ]
175.0
[ 7.00 ]
177.8
[ 5.60 ]
142.2
[ 2.13 ]
54.0
[ 5.60 ]
142.2
[ 5.25 ]
133.3
[ 5.05 ]
128.1
[ 2.03 ]
51.4
[ 159.5 ]
6.28
[ 97.6 ]
3.84
AA
[ 9.3 ] 224.6 With Gland
[ 1.32 ]
33.4
MAX
PP180
[ 6.88 ]
175.6
Latch
Range
[ 0.50 ]
12.7
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anderson Power Products:
124G30 111812P11 111812P12 114896P1 2400G1 2-8709P1 3-5964P1 3-5964P2 3-5977P1 3-5977P2 3-
5981P1 3-5986P2 3-5994P1 4802G3 4803G3 B02082G1 H1120P48 H1120P49 PK2-050B04 PL1P42-19X SK2-
142E02 SK2-142E04 SK2-142E06 SK2-142E09 SK6-142E02 SK6-142E04 SK6-142E06 SK6-142E09 SK9P-142
2-8693P1