Conforms to ISO/IEC 18000-3 (ISO/IEC 15693) Standards V680 RFID ID Flag Sensors V680-HAM91/HAM81 The RFID System Can Be Used Just Like a Sensor. Read or Write 16 Bits at a Time with One Unit Useful in Applications from Simple Line Sorting or Product Identification to Managing Work Progress or Inspection Data Uses 16-bit data (maximum access of 128 bits) The Functionality of 16 Sensors Easy Setup Settings are simple using the switches on the front of the unit. Complex programming is not necessary. Select an NPN or PNP open-collector output to support your host device. Indicators on the front panel display the ambient noise level, access data, and error code. Easy startup and maintenance. V600-HAM/HAR-compatible Access Modes to enable application of existing programs. Read/write result output (NPN or PNP) *High-speed processing at 43 ms is applicable when reading a 1-KB ID Tag. This is the communications time between the Antenna and ID Tag plus the processing time in the ID Flag Sensor. Host device PLC Operating modes, addresses, and output settings are simplified. Communications with ID Tags is done in 16-bit units to enable up to approximately 64,000 IDs. Read or write up to 128 bits by using the address shift function. High-speed processing of 43 ms* for a wide variety of applications. I/O Relay Terminal Normal Sensors (e.g., proximity sensors) 16 Sensors One ID Flag Sensor Indicators (operating status, read/write data, or error code) Handles up to 128 bits of information. ID Tag Antenna ID Tag Antenna A Complete Lineup to Meet the Needs of Most Installation Environments and Application Needs The ID Flag Sensor can be used with ID Tags and Antennas that comply with ISO/IEC 18000-3 (ISO/IEC 15693). A wide variation of products, including Antennas with IP67 protection for use in FA environments, and long-life ID Tags capable of 10 billion accesses. Take the V680 Overseas. The V680 complies with international standards and radio wave regulations. Radio wave regulation compliance is applicable to Japan, Europe, the U.S.A., and Canada. Radio wave regulation compliance for China, Taiwan, South Korea, and Southeast Asia is pending. Applications Operation Control on an AGV Line Model Identification Pull stud Drive key groove PLC V680-HS@@ Antenna V680-HAM91/HAM81 Amplifier ID Tag Identification and Management of Component Cases on a Line V680-HS51 Antenna V680-DIKP52MT ID Tag V680-HAM91/HAM81 Amplifier Product Identification and Production Progress Management * Sorting * Manufacturing Progress Control ID Tag ID Tag Timing sensor V680-HAM91/HAM81 ID Flag Sensor V680 Antenna PLC V680 Antenna V680-HAM91/HAM81 ID Flag Sensor * Reading Product Information * Writing Production Progress Information PLC Ordering Information Interface Cable (for V680-HAM91/81) Type Size Cable length Model NPN output 90 x 30 x 65 mm (excluding PNP output protrusions) V680-HAM91 V680-HAM81 Note: For details on connectable V680 Antennas, V680 ID Tags, and V680-HAM91/HAM81 ID Flag Sensors, refer to the Datasheet (Cat. No. Q160) and User's Manual (Cat. No. Z279). Model 2m V680-A60 2M 5m V680-A60 5M 10 m V680-A60 10M Appearance Note 1. The connectors are not water resistant. 2. The cables can be extended to a maximum length of 10 m. 3. Normally two Interface Cables are required for 1 Unit. If you do not need to write to ID Tags, or use the address shift or noise check functions, then one Interface Cable is sufficient. Ratings and Performance Item Model V680-HAM91/V680-HAM81 Rated voltage 24 VDC (-15% to +10%) including 10% ripple (p-p) Power consumption 3.5 W (24 VDC, 150 mA max. except external I/O line current) Ambient operating temperature -10 to 55C (with no icing) Ambient storage temperature -25 to 65C (with no icing) Ambient operating humidity 25% to 85% (with no condensation; ambient operating temperature is 40C max. at humidity of 85%) Insulation resistance 20 M min. (at 500 VDC) between all terminals excluding the FG terminal and the case Dielectric strength 1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Degree of protection IEC 60529, IP40 Materials Polycarbonate (PC) resin, ABS resin Weight Approx. 130 g Mounting DIN Track Note 1. For details, refer to the User's Manual (Cat. No. Z279). 2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately). I/O Specifications Item Model V680-HAM91 Input specifications Transistor output Short-circuit current: 3 mA (TYP) OFF voltage: 15 to 30 VDC, ON voltage: 0 to 5 VDC Output specifications NPN open-collector output 30 VDC, 20 mA max Residual voltage: 2 V max. V680-HAM81 (input terminal and 0-V terminal shorted) Input impedance: 8.2 k Applied voltage: 30 VDC max. PNP open-collector output 30 VDC, 20 mA max Residual voltage: 2 V max. This document provides information mainly for selecting suitable models. Please read the User's Manual (Cat. No. Z279) carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions. OMRON Corporation Industrial Automation Company Sensing Devices Division H.Q. Industrial Sensors Division Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7022/Fax: (81)75-344-7107 Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 Authorized Distributor: OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 OMRON Industrial Automation Global: www.ia.omron.com In the interest of product improvement, specifications are subject to change without notice. Printed in Japan Cat. No. Q162-E1-01 0308-0.3C (0308) (C) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: V680-HAM81 V680-HAM91