V10 ALD SERIES 57 WATT BUCK LED DRIVER with DALI Features * LED Driver Current up to 1400mA * Constant Current Output * Digital Address Lighting Interface (DALI) * High Efficiency up to 95% * Continuous Short Circuit Protection * DIP24 package * High Reliability * IP67 Protection MODEL Input Voltage Range Output Operating Voltage Output Rated Current Output Rated Power Ripple and Noise (max.) Note2 Efficiency (TYPICAL) Note3 ALD-C035 4.5-60Vdc 2-57VDC 350mA 20W 300mVpp 95% ALD-C070 4.5-60Vdc 2-57VDC 700mA 40W 500mVpp 95% ALD-C100 4.5-60Vdc 2-57VDC 1000mA 57W 500mVpp 95% ALD-C140 10-36Vdc 8-33VDC 1400mA 46.2W 500mVpp 95% Note: 1. 3V< Vin - Vout <30Vdc, to keep current accuracy. Nominal Input Voltage: 48Vdc, 28Vdc (C140 models) 2. Ripple and Noise are measured at rated current, Nominal Input and 36Vdc or 24Vdc (C140 models) output and 20MHz bandwidth with a 0.1uF ceramic capacitor. 3. Measured at rated current, Nominal Input and 36Vdc or 24Vdc (C140 models) output. 4. Acceptable customer modifications. AC/DC Constant Voltage 48VDC Bus DLD-C035 23,24 1,2 22,23 2,3 +Slave 4 3 1 24 + Master 11 ALD-C035 9 DLD-C070 13,14 LED1 LED2 23,24 1,2 11,12 96% Efficiency 14 16 22,23 LED1 LED2 95% Efficiency 2,3 + Slave 4 3 1 24 LED1 LED12 11,12 96% Efficiency 2,3 14 + 11 LED3x12 ARRAY 16 9 95% Efficiency +Master 11 ALD-C100 22,23 13,14 14 16 LED1 LED12 95% Efficiency 9 ALD-C070 DALI DALI+ Controller DALI- 1 V10 Specifications ALD Derating Curve All specifications are Typical at nominal line, full load and 25C unless otherwise noted INPUT SPECIFICATIONS: 120 OUTPUT SPECIFICATIONS: Constant Current Accuracy ..... (note1) ............................... 5% max. Current Line Regulation ......... (note 2) .............................. 5% max. Current Load Regulation ....... (note 3) ............................. 5% max. Short Circuit Protection .............. Constant Current with Auto Recovery Start up time ............................................................... 60ms max. 100 Load(%) Input Voltage ..................... 1400mA/other ......... 10-36VDC/4.5-60Vdc Input Surge Voltage (1second) ...... 1400mA/other .... 50Vdc/65Vdc max. Input Filter ................................................................. Capacitor Under Voltage Lockout ............ Power up ............. 8.0Vdc/4.0Vdc typ. Power down ....... 6.9Vdc/3.7Vdc typ. -40.0 60.0 80 60 60.0 350mA 700mA 1000mA 1400mA 40 20 0 60.0 -40 GENERAL SPECIFICATIONS: -20 0 20 40 60 80 100 ) Ambient Temperature( Efficiency .................................................................... See Table Temperature Coefficient ........................................ 0.05%/(0~50) Isolation Voltage ....................................................... Non-isolation Switching Frequency ... 1400mA/Others ........ 50-500KHz/ 300KHz typ. DALI Control: Operating Ambient Temperature .............. -40 ~ 85 see Derating Curve Output Current Range .................................................... 10%-100% Case Temperature .......................................................... 100 max. SAFETY AND EMISSIONS: Cooling ............................................................ Natural Convection EMI ...................................................... EN55022/EN55015 Class B Storage Temperature .................................................... -55 ~ 125 EMS ....................................................... EN61547,EN61000-4-2,3,4,5,6 Operating Humidity ............................ 10%~95%RH non-condensing NOTE: Operating Altitude ........................................... Sea Level to 3000m Vibration .......... 0~500Hz, 2G 60min./1cycle, period for 3hours, 3 axes Shock .................................................. 30g peak, half sine, 6 axes MTBF, MIL-HDBK-217F (25) ......................................... >1.6Mhrs Dimensions .................... 1.25x0.80x0.50 Inches(31.8x20.3x12.7 mm) Weight ................................................................................ 18g Case Material ........................................................... Plastic Case 1. 3V<Vin-Vout <30Vdc, to keep current accuracy. 2. Current Line regulation is measured from High Line to Low Line. 3. Current Load regulation is measured from high to low operating voltage. 4. Acceptable customer modifications. Mechanical Specification All Dimensions in Inches[mm] Tolerance Inches:x.xx=0.02 ,x.xxx=0.010 Millimeters: x.x=0.5 , x.xx=0.25 0.100 [2.54] 0.175 [4.44] Pin Function 1 PWM/ON/OFF 2,3 0.020 [0.50] 10pl. BOTTOM VIEW 1.25 [31.8] PIN CONNECTION 9 DALI - 11 DALI + 14 +V Output 16 -V Output 22,23 0.600 [15.24] 0.80 [20.3] 0.15 [3.8] 0.50 [12.7] 2 -Vin 24 +Vin Analogue DIMming Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cincon: ALD-C140 ALD-C100 ALD-C070