5S2E D mm 3403297 0000729 911 MMUPEC , EUPEC T218N T-25-/9 Typenreihe/Type range T218N 400* 600 800 1000 1100 1200 1400 1600 1800* Elektrische Eigenschaften Electrical properties Hchsizuiassige Werte Maximum permissible values Vor: Vanm Periodische Vorwarts- und repetitive peak forward off-state 400...1800 Vv Rickwarts-Spitzensperrspannung and reverse voltages lrramsm Effektiver DurchlaBstrom RMS on-state current 400 A lava Dauergrenzstrom average on-state current te = 85C 218 A to = 75C 255 A tram Periodischer Spitzenstrom repetitive peak on-state current 2400 A Itsm StoBstrom-Grenzwert surge current tp = 10 ms, t, <45C 3800 =A b= 10 ms, y= ty max 3400 A fitdt Grenzlastintegral /i@dt-value tp = 10 ms, ts 45C 72200 3=As tp = 10 ms, ty = ty max 57800 8 As (dildt), Kritische Stromsteilheit Critical rate of rise of on-state current _ nicht periodisch/non repetitive 800 Alus Dauerbatrieb/continuous operation, itm = 800 A, 150 Alus Vv. = 10 V, ig = 0,75 A, dig/dt = 0,75 A/us (dvidt),, _ Kritische Spannungssteilheit critical rate of rise of off-state voltage = vp = 67% Vor: ty = ty max 5. Kennbuchstabe/Sth latter C 400 Vius 5. Kennbuchstabe/Sth letter F 1000 Vius Charakteristische Werte Characteristic values Vr Obere DurchiaBspannung max. on-state voltage ty = 25C, iy =800A 2,02 V Vito) Schleusenspannung threshold voltage ty=tymax 0,9 V IT Ersatzwiderstand slope resistance ty = ty max 1,35 mQ Vert Obere Ziindspannung max. gate trigger voltage ty = 25C, Vp =6V,Ra=5Q 2 Vv ler Oberer Ziindstrom max, gate trigger current ty = 25C, vo =6V, Ra =5Q 150 mA Unterer Ziindstrom min. gate trigger current ty = byjmaw Vo = 6 V, Ra =O 10 mA ln Oberer Haltestrom max. holding current ty = 25C, vp = BV, RA, =5Q 200 mA It Oberer Einraststrom max. latching current ty = 25C, vp = 6 V, Rex 100 800 mA ig = 0,75 A, dig/dt = 0,75 Alps, ty = 20 us ip, in Oberer Vorwarts- und Riickwarts- max. forward off-state and ty = tymax: Yo = Vorm (VR = Var) 30 mA Sperrstrom reverse currents toa Oberer Ziindverzug max. gate controlled delay time ig = 0,75 A, digfdt = 1,5 A/us 4,5 us ty Typische Freiwerdezeit typical turn-off time Prifbedingungenstest conditions 3.4.3.4 200 ps Cutt Typische Nullkapazitat typical zero capacitance ty = 25C, f = 10 kHz 3 nF Thermische Eigenschaften Thermal properties Innerer Warmewiderstand thermal resistance, junction to case Rihuc fur beidseitige Kihlung for two-sided cooling @ = 180el, sinus = 0,111C/W DC < 0,103C/W Rinucia) fir anodenseitige Kihlung for anode-sided cooling = 180el, sinus = 0,174C/W pc = 0,166C/W Rinse) fiir kathodenseitige KGhlung for cathode-sided cooling = 180el, sinus s 0,274C/W pc <= 0,266C/;W Rinek Warmewiderstand fiir einen single sided thermal Ubergang zwischen Gehduse resistance, und Kihikrper case to heatsink 0,03 C/W ty) max Hchstzul. Sperrschichttemperatur max. junction temperature 125C {yjop Betriebstemperatur operating temperature ~ 40C...+125C tstg Lagertemperatur storage temperature 40C...+140C Mechanische Eigenschaften G FE Gewicht AnpreBkraft MaBbild Kriechstrecke Feuchteklasse Schittelfestigkeit Mechanical properties weight clamping force outline creepage distance humidity classification vibration resistance * Fur grdBere Stiickzahlen bitte Liefertarmin erfragen/Delivery for larger quantities on request 132 DIN 41814-1851 A4 DIN 40040 f=50Hz 70g 3...4,5 KN Seite/page 240 17mm Cc 5x9,81 m/s?EUPEC SeE D MM 3403297? 0000730 633 MBUPEC T-25-19 2000 i, [A] 1500 1000 500 t 200m TI200N2 v, []}-_ T yay [4] o Bild/Fig. 1 Bild/Fig. 2 DurchiaSkenninien/On-state characteristics DurchlaBverlustleistung P;/On-state power loss P; a ~ Typische Kennlinien/ypical characteristics Parameter: Stromflu@winkel @/current conduction angle b Grenzkennlinien/limiting characteristics 100 200 300 1 200 Na 100 200 300 I tavm (4) 1 200W 41 ' Itavm [a] oo Bild/Fig. 3 Bild/Fig. 4 Hochstzulassige Gehausetemperatur t, bei beidseitiger Kiihlung Hochsizulassige Gehausetemperatur t, bei anodenseitiger Kihlung Maximum allowable case temperature t, ai two-sided cooling Maximum allowable case temperature to at anode sided cooling 0 20 40 60 80 100 120 140 160 0 100 200 300 1 reend 1 200 N7 1 yam [A]) Ttavm [4] o Bild/Fig. 5 Bild/Fig. 6 Ho6chstzulassige Kuhimitteltemperatur t, bei beidseitiger Luftselbstkihlung, Hchstzulassige Kuhimitteltemperatur t, bei verstarkter beidseitiger Luftkthlung, Kuhikorper K0,36S. Kuhlkorper K0,12F, V, = 50 I/s. Maximum aliowable cooling medium temperature t, at natural two-sided cooling, Maximum allowable cooling medium temperature t, at forced two-sided cooling, heatsink type K0.36S. heatsink type K0.12F, V, = 50 I/s. 133EUPEC T218N 134 10 20 4060 100 200 40 1 2 6 6 W 20 60 60 100 ms s m4 Ven t_ Bild/Fig. 7 Transienter innerer Warmewiderstand Zinc Transient thermal impedance, junction to case, Zinc ----- anodenseitige Kihlung/anode sided cooling beidseitige Ktihlung/two-sided cooling 300 THON T aa [4] Bild/Fig. 9 Hchstzulassige Gehdusetemperatur t; bei beidseltiger Kiihlung Maximum allowable case temperature t, at two-sided cooling 150 1 tavw [4] T 20013 Bild/Fig. 11 Hachtzulassige Kuhimitteltemperatur t, bei beidseitiger Luftselbstkuhlung, Kiihlkrper K0,36S. Maximum allowable cooling medium temperature t, at natural two-sided cooling, heatsink type K0.36S, SeE D MM 3403297 0000731 57T MMUPEC f 480 420 P,[W] tac 360 300 240 180 1 200 WS I wy [4] Bild/Fig. 8 DurchlaBverlustleistung P;/On-state power loss P; Parameter: StromfluBwinkel @/current conduction angle @ 40 20 100 200 300 a0 Trew Il tavm [a] Bild/Fig. 10 Hchstzulassige Gehausetemperatur t, bei anodenseitiger Kithlung Maximum allowable case temperature ty at anode sided cooling 130 120 100 90 80 so 40 30 20 0 100 200 300 1200. Hue l ram [a] Bild/Fig. 12 Hchstzuldssige Kiihimitteltemperatur t, bei verstarkter beidseitiger Luftkishtung, Kihikrper K0,12F, V_ = 50 I/s. Maximum allowable cooling medium temperature t, at forced two-sided cooling, heatsink type K0.12F, V_ = 50 I/s. .EUPEC 0.26 Ath sC Fcvw) 920 G1 t ms + s TION 181 ow [ra] 06 93 D 0 & OKO 200 400 1 2 46 0 0 41 2 = ms en $$ $5 = }{=4 __ min. __>5 460 2 41 7200 KT t .r- Bild/Fig. 14 Uberstrom low bei beidseitiger Luftselbstkuhlung, t, = 45C, Kuhlkrper K0,36S. Overload on-state current Ijjoy at natural two-sided cooling, ta = 46C, heatsink type K0.36S. Parameter: Vorlaststrom/pre-load current lravivor rawtyane 120A 700 600 'tint (aj 500 TavCvordol 400 300 =~ 95 on ZY F z00 we 0 02 14 1 2 46 08 0 & WO WO 200 300 400 $00 600 TON DR [%] Int {4] Bild/Fig. 16 Hchstzulassiger DurchlaBstrom lrwy7 bei Aussetzbetrieb und beidseitiger Luftselbstkihlung, t, = 45C, KGhikrper K0,36S. Limiting on-state current Iy,7 during intermittent operation at natural two-sided cooling, t, = 45C, heatsink type K0.36S. Parameter: Spieldauer/cycle duration SD Vorlaststrom/pre-load current lravie) tov [na } 6 3 ' 800 lant [4] 600 hav 500 400 300 200 O1 O2 06 1 2 SeE D MM 3403297 0000732 4Ob MBUPEC T-25-19 Bild/Fig. 13 Transienter innerer Warmewiderstand Zinc Transient thermal impedance, junction to case, Zinc ----- anodenseitige Kuhlung/anode sided cooling beidseitige Kuhlung/two-sided cooling OW 20 4060 100 200 4006001 2 460 MD 41 2 460 0 41 fe 8 re pee rin 1 200 N18 { _- Bild/Fig. 15 . Oberstrom how bei verstarkter beidseitiger Luftkiinlung, t, = 35C, Kiihikrper K0,12F, V, = 50 I/s. Overload on-state current lyoy, at forced two-sided cooling, t, = 35C, heatsink type K0.12F, V, = 50 I/s. Parameter: Vorlaststrom/pre-load current raver = 50+ =oR- rE LT tale wad Ne 1 460 0 @ 10020 300 400 500 600 =-700 1 20n20 DR[*] = tr [4] Bild/Fig. 17 Hchstzuldssiger DurchlaBstrom Innr bei Aussetzbetrieb und verstarkter beidseitiger Luftkhlung, t, = 35C, Kihlkorper K0,12F, V, = 50 I/s. Limiting on-state current In. during intermittent operation at forced two-sided cooling, t, = 35C, heatsink type K0.12F, V, = 50 I/s. Parameter: Spieldauer/cycle duration SD Vorlaststrom/pre-load current lravpor 135EUPEC SeE D MM 3403297 0000733 342 MMUPEC T218N T-25+-19 Bild/Fig. 18 Grenzstrom loys bei Luftselbstkihlung und verstarkter Luftkiihiung, Kihikrper K0,36S und K0,12F, Uay = 0,8 Urrw- Limiting overload on-state current loys at natural and forced cooling, heatsink type K0.36S and K0.12F, Unw = 0.8 Unam. a Belastung aus Leerlauf/current surge under no-load conditions b Belastung nach Betrieb mit Dauergrenzstrom lrayu/ current surge occurs during operation at limiting mean on-state current rating hava 'teovea [xa ] 06 0 20 go 60 100 200 400 600 1 2 4 6 10 he ms el 8 = 1 200N7 t 20 103 | 4 10 %g tgalus] 10? 4 40 2 20 40 10 6 a8 4 96 2 O4 1 92 oa o2 o1 oA 101 2 4 6 8 102 2 4 6 86103 2 4 6 8104 2 2 406010 20 400 1 2 46 170 2 40 6 T2OeN2s |. | 'g [nA] mA A 7 man] ts; TSIN2t '6 . fe Bild/Fig. 19 . Bild/Fig. 20 Zindbereich und Spitzensteuerleistung bei vp = 6 V. Ziindverzug tgg bei irm = 50 A, ty = 25C. Gate characteristic and peak gate power dissipation at vp = 6 V. Gate controlled delay time ty at ina = 50 A, ty = 25C. Parameter: . 1 2 3 a auBerster Verlauf/imiting characteristic typisch . eae Steuerimpulsdauer/Pulse duration t, {ms} 10 1 0,5 b ~ typischer Verlauf/ypical characteristic Hchstzuldssige Spitzensteverlaistung/ Maximum allowable peak gate power (WI 20 40 60 500 toss Os 300 200 Bild/Fig. 21 Nachlaufladung Qs in Abhangigkeit von der abkommutierenden Stromsteilheit -di/dt bei t, = 125C. 100 Der angegebene Verlauf wird von 90% aller Thyristoren nicht Gberschritten. Lag charge Qg, versus the rate of decay of the forward on-state current -di/dt at ty = 125C. These curves are valid for 90% of all thyristors. 20 40 60 80 wo T51N23 di/dt [aus] _ 136