1
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
SMD B
19-213/T1D-KS1T1B2/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH.
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).
Description
․The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size,
higher packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Device Selection Guide
Chip
Materials
Emitted Color
Resin Color
InGaN
Pure White
Yellow Diffused
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
20
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
100
mA
Power Dissipation
Pd
75
mW
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Electrostatic Discharge
ESDHBM
150
V
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
180
-----
360
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
130
-----
deg
Forward Voltage
VF
2.9
-----
3.6
V
Reverse Current
IR
-----
-----
50
μA
VR=5V
Note:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Forward Voltage: ±0.05v
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Bin Range of Luminous Intensity
Bin Code
Min.
Max.
Unit
Condition
S1
180
225
mcd
IF =20mA
S2
225
285
T1
285
360
Bin Range of Forward Voltage
Group
Bin
Min.
Max.
Unit
Condition
B2
36
2.90
3.00
v
IF =20mA
37
3.00
3.10
38
3.10
3.20
39
3.20
3.30
40
3.30
3.40
41
3.40
3.50
42
3.50
3.60
Note:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Forward Voltage: ±0.05v
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Chromaticity Coordinates Specifications for Bin Grading
Bin Code
CIE_x
CIE_y
Condition
3
0.294
0.254
IF =20mA
0.294
0.286
0.314
0.315
0.314
0.282
4
0.294
0.286
0.294
0.319
0.314
0.347
0.314
0.315
5
0.314
0.282
0.314
0.315
0.334
0.343
0.334
0.311
6
0.314
0.315
0.314
0.347
0.334
0.376
0.334
0.343
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01 ).
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
CIE Chromaticity Diagram
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Typical Electro-Optical Characteristics Curves
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
7
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Package Dimension
Cathode Mark
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
8
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Moisture Resistant Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Dom.Wavelength Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
9
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
10
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in
less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each
terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics
of the LEDs will or will not be damaged by repairing.
DATASHEET
SMD REFLECTOR
19-213/T1D-KS1T1B2/3T
11
Copyright © 2010, Everlight All Rights Reserved. Release Date : Jul.8.2016. Issue No: DSE-0006097 Rev.3
www.everlight.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
