Druck PTX 661 PRODUCT NOTE Hammer Union Pressure Transmitter * 0.1% FS accuracy * NACE compatible * CENELEC Intrinsically Safe Certified * FM/CSA Class I, Div 1 Intrinsically Safe Pending * CE marked * Fast response time (2 kHz) * Repairable The PTX 661 Hammer Union Pressure Transmitter has been designed for use in extremely harsh environments in both on-shore and off-shore Oil Drilling operations where high shock and vibration is likely to be encountered.The transmitter is available in both the 1502 and 2202 WECO Wing Union configurations, both of which are NACE sour gas compatible. The PTX 661 differs from other Hammer Union Pressure Transmitters in that it has a replaceable pressure transmitter insert which substantially reduces the high cost of transmitter replacement. With a 2 kHz response time, the device is suitable for measuring static and dynamic mud pressure. The PTX 661 incorporates Druck's proprietary high-accuracy silicon sensor with up to 2.5 times better accuracy than many competitive devices. The low-volume oil-fill tecnology allows response times of faster than 2 kHz. The field-proven 4-20mA electronics, packaged in a rugged enclosure, provide power supply regulation, reverse polarity, overvoltage and EMC protection.The fully encapsulated design provides exceptional reliability in high shock and vibration environments. The PTX 661 is CENELEC intrinsically safe certified and has FM and CSA Class I, Div 1 (Groups A, B, C, D) intrinsically safe pending. PTX 661 STANDARD SPECIFICATION Operating Pressure Ranges 0 to 5000, 6000, 10,000 and 15,000 psia or psi sg Overpressure 2X FS to a maximum of 20,000 psi Pressure Containment 30,000 psi max Pressure Media Fluids compatible with 316L Stainless Steel (NACE compatible), Inconel X750 and Inconel 625 Supply Voltage 10-28 Vdc The minimum supply voltage that must appear across the transmitter terminals is 10 Vdc and is calculated by: Vmin=Vs-(0.02xRL) Output Current 4-20 mA (2-wire configuration) Zero Setting 1% FS @ 750F Span Setting 0.5% FS @ 750F Combined Non-linearity, Hysteresis and Repeatability 0.1% F.S. BSL Temperature Limits Process: -400 Ambient: -400 Storage: -600 Compensated: -400 to to to to +2300F +2300F +3000F +1760F Weight 6 pounds nominal RELATED PRODUCTS Response Time Faster than 0.5msec. (2 kHz) Pressure Connection -8547 WECO Wing Union #1502 (shown in drawing) -8593 WECO Wing Union #2202 Ingress Protection Nema 4X 1. PTX 500/600 Pressure Transmitter 2. PTX/PMP 1240 Pressure Transmitter 3. MDK 24/MDK-LV Lightning Arrester 4. DPI 280 Series Indicators ORDERING INFORMATION Please state the following: (1) Type PTX 661-85** Code Model Safety Classifications CE marked Baseefa Eex ia IIC T4 amb 800C BAS No. Ex97D2058 Factory Mutual Research Intrinsic Safe , Class I, Div 1 Groups A, B, C and D Pending Canadian Standards Association Intrinsic Safe Class I, Div 1, Groups A, B, C, D Pending Electrical Connection -1 10-pin LEMO Connector P/N: EGG-4K-310 -2 6-pin Bayonet Connector P/N: PTIH-10-6P -3 2-pin Glenair Connector P/N: GC 379-2-14S-2P OPTIONS Carrying Handle P/N: XA2448-1-01 Insertion/Extraction Tool P/N: F2186-1 Replaceable Pressure Transmitter Insert P/N: PTX 721-8518 (state range) NIST- traceable 9-pt Room Temperature Calibration Certificate PTX Current output Code 661 Base Model Code Electrical Connection 10-pin LEMO Connector 1 P/N EGG-4K-310 6-pin Bayonet Connector 2 P/N PTIH-10-6P 2-pin Glenair Connector 3 P/N GC 379-2-14S-29 Code Pressure Connection 8547 WECO #1502 8593 WECO #2202 PTX 661 -1 85** (2) Operating Pressure Range (sealed gauge or absolute) (3) Options (if required) Continuing development sometimes necessitates specification changes without notice. Druck is an ISO 9000 registered company. Temperature Effects TEB: 1% over the compensated range INSTALLATION DRAWINGS: Dimensions in inches/(mm) Druck Druck Incorporated 4 Dunham Drive New Fairfield CT 06812 Tel: (203) 746-0400 Fax: (203) 746-2494 E-Mail:sales@druck.com http://www.druck.com Representative PDS-A085 10/98