Document 123-1 SurfaceMountDataLineEMIFilters These surface mount filters are designed to virtually eliminate the problem of conducted EMI in data line applications. They provide exceptional common mode noise attenuation from 15 MHz to 300 MHz while passing signal line data frequencies below 300 MHz with minimal attenuation. These low resistance filters have been designed for excellent electrical isolation, environmental stability, and low cost. Their flat top construction is compatible with auto insertion equipment. Coilcraft data line EMI filters come in 10, 8, 4, 3 and 2-line versions with DC current capacity of 500 or 100 mA. Coilcraft Designer's Kit D103 contains all values shown plus through-hole versions. To order, please contact Coilcraft or visit http://order.coilcraft.com. Typical Response* Part Number Max. L/winding DCR Current Min. Max. Isolation Color Lines (mA) (H) (mOhms) (Vrms) Dot CCDLF 10000 10 CCDLF 8000 8 CCDLF 8500 8 TTDLF 4000 4 TTDLF 4500 4 100 100 500 100 500 5 5 5 5 5 250 250 200 250 200 300 300 300 300 300 Brown Black Green Yellow Blue TTDLF 3000 TTDLF 3500 TTDLF 2000 TTDLF 2500 100 500 100 500 5 5 5 5 250 200 250 200 300 300 300 300 Orange Violet Red Green 3 3 2 2 Operating temperature range -40C to +85C Electrical specifications at 25C *measured on HP8753D network analyzer. Specifications subject to change without notice. Document 123-1 Revised 9/26/01 Document 123-2 Surface Mount Data Line EMI Filters CCDLF 10000 .060 Ref 1,52 Land Pattern .040 Typ 1,02 .030 0,76 5 .030 0,76 .360 Max 9,14 .270 6,86 1 .360 Max 9,14 3 2 1 .050 1,27 .020 0,51 6 20 7 19 .230 8 5,84 9 18 .050 17 1,27 10 .050 Cen 1,27 20 4 .170 Max 4,32 16 17 18 19 20 5 4 3 2 1 15 14 13 12 11 6 7 8 9 10 16 11 12 13 14 15 .020 0,51 Parts per 13 reel: 1,000 Tape width: 16mm For packaging data, see "Tape and Reel Specifications" (Document 173). CCDLF 8000 .060 Ref 1,52 Land Pattern .040 Typ 1,02 .030 0,76 4 3 2 1 .050 1,27 .020 0,51 8 .030 0,76 .305 Max 7,75 .220 5,59 1 5 16 .180 6 4,57 7 15 8 13 .050 Cen 1,27 16 .305 Max 7,75 14 9 .170 Max 4,32 10 .050 1,27 7 6 5 9 10 11 12 1 2 3 4 16 15 14 13 11 12 .020 0,51 Parts per 13 reel: 1,000 Tape width: 16mm For packaging data, see "Tape and Reel Specifications" (Document 173). TTDLF Series .050 Cen 1,27 .050 1,27 Typ 4 TTDLF 4000 .008 Ref 0,20 TTDLF 3000 TTDLF 2000 8 7 6 5 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 1 2 3 4 5 .320 8,13 .198 5,03 Max 8 1 .250 Cen 6,35 .030 Ref 0,76 Land Pattern Parts per 7 Reel: 500; 13 Reel: 2,200 Tape width: 16mm For packaging data, see "Tape and Reel Specifications" (Document 173). .030 0,76 .060 1,52 .155 Max 3,94 .020 0,51 .060 1,52 5 4 6 3 7 2 8 1 .200 5,08 .050 1,27 Specifications subject to change without notice. Document 123-2 Revised 12/7/99