Industrial IoT Flexible and Secure Low-Power Ethernet Solutions Ethernet Switches and PHYs Software Power over Ethernet (PoE) Miniature Atomic Clocks Timing ICs FPGAs Signal Conditioners and Crosspoint Switches Microsemi and Industrial IoT The Challenge Machines and various types of equipment are increasingly both connected and intelligent, imposing vastly increased networking and bandwidth requirements on network infrastructures in order to deliver real-time visibility and control. However, today's industrial network architectures are largely heterogeneous with vast installations of legacy equipment and specialized networked protocols still in use. Modernizing these networks requires a strategy to address the system reliability, determinism and security imperatives of industrial settings. With Ethernet increasingly the common denominator in these environments, Industrial Internet of Things (IIoT) networking has new requirements for deeply embedded, secure, and performance-optimized networking connectivity with accurate timing synchronization, ring protection, and line rate encryption, while demanding deterministic and reliable performance at low power. Software: To reduce development costs and time to market, Microsemi also offers comprehensive software choices that enrich our device portfolio, including IEEE 1588 timing and optimized managed switch software stacks. IP: Microsemi SoC IP provides all the necessary building blocks for Industrial Ethernet communications to simplify communications from fieldbus interfaces to an Ethernet backbone. Ecosystem Solutions: Through Microsemi's ecosystem, customers may also leverage multi-protocol Industrial Ethernet solutions as well as security and ODM turnkey solutions specifically for industrial applications. The Value of Choosing Microsemi The Solution Microsemi's broad portfolio--including ICs, systems, software, IP and ecosystem solutions-is inherently optimized for IIoT Ethernet networking applications and needs. ICs and Systems: Microsemi's flexible Industrial Ethernet solutions portfolio includes ICs such as Ethernet switches and PHYs, PLLs and oscillators, FPGAs/SoCs, Power over Ethernet (PoE) devices, and rubidium oscillators, complemented by system solutions such as industrial PoE injectors/midspans and grandmaster clocks. Unlike traditional Ethernet switch IC suppliers, Microsemi focuses on low-bandwidth and high-feature IC architectures that deliver sizeable low-power 2 advantages and fit IIoT market needs such as port flexibility, long life cycle, deterministic behavior, and stringent reliability. Selecting a solutions provider that can meet your IIoT networking requirements is an important choice. Microsemi is a long-term supplier of Ethernet switching and PHY technology, with over 300 million Gigabit Ethernet ports shipped. Microsemi is also the only IC, systems, and software provider with a power-optimized, flexible, and reliable industrial Ethernet networking portfolio that supports Ethernet interfaces and fieldbus protocols for a broad range of Industrial Ethernet applications, enabling highly reliable and secure IIoT networks. Contact us today to learn how you can get to market faster with Microsemi IIoT solutions. Industrial Automation Process Control Intelligent Transportation Smart Energy Physical Security Automotive Ethernet Solutions Ethernet Switches, PHYs, Software, and PoE: Optimized for IIoT Networking Microsemi has been at the forefront of the worldwide transition of industrial networks and other market segments to Ethernet, with a growing portfolio of products providing advanced features and efficient architectures that result in scalable, low-power and high-reliability performance in the transmission of voice, video, and data. With over 300 million Gigabit Ethernet ports shipped, Microsemi is a global leader in Ethernet switch and physical layer IC technology and IP. Microsemi is also a leading provider of end-to-end PoE ICs and midspans/injectors since 1999, with a well-established track record in Enterprise applications. Key Features * Faster time-to-production with complete hardware and software solutions * Line monitoring features that gauge and react to the health of an active Ethernet link * Industrial temperature range operation * Solutions with low-alpha mold compound, improving overall SEU immunity * Ethernet switch solutions up to 100 Gbps of bandwidth, with low power and integrated PHYs * Ethernet PHYs offer simplified designs with flexible clocking and management features, wide voltage interface ranges, and adjustable drive strength to reduce EMI * Complete IEEE 1588-compliant 1 Gbps and 10 Gbps solutions with nanosecond-level timestamping accuracy and AES-256 MACsec security features that preserve accuracy * Broadest PoE product portfolio for indoor and outdoor deployments with PoE ICs delivering power (PSE) and receiving power (PD), and a wide range of PoE injectors/ midspans injecting up to 95 W over a single Category 5/5E/6/6A/7 cable Ethernet Switches Ports* Embedded PHYs Interfaces Managed 1G 2.5G 10G 10G 1G SGMII QSGMII XAUI SFI/XFI PCIe Product Number L2/L2+/ L3-Aware 1588 Ring Temp. Temp. Protection Min.C Max. C VSC7420 SparX-III-10umTM 10 2 8 * L2 -40 125 VSC7421 SparX-III-17umTM 17 2 12 * L2 -40 125 VSC7422 SparX-III-25um 25 1 12 * -40 125 VSC7423 Caracal LiteTM 7 2 * 5 * L2+ * * -40 125 VSC7428 Caracal-1 11 2 * 8 * L2+ * * -40 125 VSC7429 Caracal-2 26 2 * 12 * L2+ * * -40 125 VSC7414 SparX-III-11TM 11 2 * * L2+ * -40 125 VSC7460 Jaguar-1 31 10 4 * * * L2+/L3-Aware * * -40 125 VSC7462 LynX-1TM 20 10 4 * * * L2+/L3-Aware * * -40 125 VSC7438 Serval-2 14 12 2 * * L2+/L3-Aware * * -40 125 VSC7464 LynX-2 26 16 4 * 4 VSC7468 Jaguar-2TM 52 24 4 * 4 VSC7440 SparX-IV-34 4 4 2 * 2 VSC7442 SparX-IV-52TM 52 VSC7444 SparX-IV-44 26 16 2 * 2 VSC7448 SparX-IV-80 52 24 4 * 4 VSC7511 Ocelot-4umTM 4 VSC7512 Ocelot-10um 10 VSC7513 Ocelot-8TM 8 VSC7514 Ocelot-10 10 TM TM TM TM TM TM TM TM TM TM TM 2 * 2 * 4 2 2 * L2 * * * * * * * * * L2+/L3-Aware * * -40 125 * * * * * L2+/L3-Aware * * -40 125 * * L2+/L3-Aware * * -40 125 * L2+/L3-Aware * * -40 110 * * * * * * R * * L2+/L3-Aware * * -40 110 * * R * * L2+/L3-Aware * * -40 110 * L2 * -40 125 * 4 * * * L2 * -40 125 * 4 * * * L2 * * -40 125 * 4 * * * L2 * * -40 125 *Maximum port counts exclude the NPI port. Shall not surpass the device's max available I/O bandwidth. "R" denotes both RXAUI and XAUI support 1G integrated ports support dual media Copper or Fibre applications 3 Ethernet Solutions Ethernet PHYs Speed FE GE Product Number Ports MAC Interfaces Cu-Only or Dual Media 256/128-bit MACsec SyncE 1588v2 Accuracy Temp. Min.C Temp. Max. C VSC8501-03 * 1 RGMII/GMII/MII (2.5 V/3.3 V) Cu * -40 125 VSC8502-03 * 2 RGMII/GMII/MII (2.5 V/3.3 V) Cu * -40 125 VSC8504-04 * 4 QSGMII/SGMII Dual Media * -40 125 VSC8512 * 12 Q/SGMII Dual Media * -40 125 VSC8514-03 * 4 QSGMII Cu * -40 125 VSC8514-14 * 4 QSGMII Cu -40 125 1 RGMII/RMII (1.5 V/1.8 V/2.5 V/3.3 V) Cu -40 125 1 RGMII/RMII (1.5 V/1.8 V/2.5 V/3.3 V) Cu -40 125 1 RGMII/RMII/MII (1.5 V/1.8 V/2.5 V/3.3 V) Cu * -40 125 -40 125 VSC8530-03 * VSC8531-03 * VSC8540-03 * VSC8541-03 * 1 RGMII/RMII/GMII/MII (1.5 V/1.8 V/2.5 V/3.3 V) Cu * VSC8552-04 * 2 QSGMII/SGMII/RGMII (2.5 V/3.3 V) Dual Media * -40 125 VSC8562-14 * 2 QSGMII/SGMII Dual Media * * -40 125 VSC8564-14 * 4 QSGMII/SGMII Dual Media * * -40 125 Dual Media * 10 nS -40 125 SOF VSC8572-04 * 2 QSGMII/SGMII/RGMII (2.5 V/3.3 V) VSC8574-04 * 4 QSGMII/SGMII Dual Media * 10 nS -40 125 VSC8575-14 * 4 QSGMII/SGMII Dual Media * 4 nS -40 125 VSC8582-14 * 2 QSGMII/SGMII Dual Media * * 4 nS -40 125 VSC8584-14 * 4 QSGMII/SGMII Dual Media * * 4 nS -40 125 All Gigabit Ethernet PHYs are also available with a 0 C to 125 C temperature range. Ethernet Software Product Number eCOS LINUX 4 Description Market Application Basic L2 Advanced L2 Protection IEEE 1588/ SyncE Carrier Ethernet iCLI, JSON/ RPC, SNMP CE Services Service Provider Turnkey * * * * * * * * VSC6810SDK VSC6818SDK VSC6815SDK VSC6817SDK IStaX Industrial IoT Turnkey * * VSC6813SDK VSC6816SDK SMBStaX Enterprise Turnkey * * VSC6812SDK VSC6819SDK WebStaX Enterprise Turnkey * VSC6802API Unified API Development VSC6803API Open API Development VSC6811SDK WebConfig Turnkey * VSC6825SDK Unmanaged Turnkey * VSC6830SDK Linux BSP Development * * Power over Ethernet (PoE) Industrial PoE Solutions Watts per Port Product Number of Ports Power Input Warranty 30 W PD-9001GI/DC 1 DC 1 Year 60 W PD-9501GI/DC 1 DC 1 Year All Microsemi PoE products support Gigabit data rates PoE PD Front End ICs IC Type PoE Type IEEE Compliant Max Power [W] Max Current [A] Max Channel Impedance [] PD70100ILD Front end Type 1 - AF - 15 W IEEE 802.3af 15.4 0.45 0.6 PD70101ILQ Combo: Front + PWM controller Type 1 - AF - 15 W IEEE 802.3af 15.4 0.45 0.6 PD70200ILD Front end Type 2 - AT - 30 W IEEE 802.3at 51 1.2 0.6 PD70201ILQ Combo: Front + PWM controller Type 2 - AT - 30 W IEEE 802.3at 51 1.2 0.6 Front end PoH - 95 W PoH 95 2 0.3 Combo: Front + PWM controller PoH - 95 W PoH 95 2 0.3 Ideal diode bridge PoH - 95 W PoH 95 2 NA Product PD70210ILD/PD70210AILD PD70211ILQ PD70224ILQ-TR PoE PSE Manager Ports FETs Sense Resistor MCU Options Host I/F Options LED Driving Options PD69208ILQ 8 Internal 0.2 Internal 0.1 PD69200-VVVVSS Marvell ISSR I2C UART SPI CPLD Host PD69204ILQ 4 Internal 0.2 Internal 0.1 PD69200-VVVVSS Marvell ISSR I2C UART SPI CPLD Host PD69108ILQ/ PD69108FILQ 8 Internal 0.3 External 0.36 PD39100X-0YYY PD69100Y-GGGG Marvell ISSR I2C UART SPI CPLD Host PD69104ILQ 4 Internal 0.3 External 0.36 PD39100X-0YYY PD69100Y-GGGG Marvell ISSR I2C UART SPI CPLD Host PD69104B1ILQ/ PD69104B1FILQ 4 Internal 0.3 External 0.36 Auto Mode I2C UART Direct Host PD69101ILQ 1 Internal 0.3 External 0.5 Auto Mode SPI Direct Host PD69012 12 External 0.1 External 0.5 PD69008 8 External 0.1 External 0.5 PD69000XX-GGGG Marvell ISSR Auto Mode PD69000XX-GGGG Marvell ISSR Auto Mode I2C UART SPI I2C UART SPI PD64001 1 External 0.1 External 2 Auto Mode none Product CPLD Host CPLD Host Direct Standards Supported IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W PoH 95W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W PoH 95W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W PoH 95W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W PoH 95W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W PoH 95W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W IEEE 802.3af 15.4W IEEE 802.3at 30W IEEE 802.3at 60W Max PM System Evaluation Boards 96 Ports PD-IM-7648 PD-IM-7648H 96 Ports PD-IM-7648 PD-IM-7648H 96 Ports PD-IM-7548 PD-IM-7548H 92 Ports Use PD69108 EVB 4 Ports PD-IM-7504B 2 Ports PD-IM-7401 96 Ports PD-IM-7448E PD-IM-7448A 88 Ports PD-IM-7416A 1 Port PD-IM-7301 5 Miniature Atomic Clocks Miniature Atomic Clocks: SWaP Optimized for Robust Industrial Holdover Highly compact, lightweight, and low power, Microsemi's Miniature Atomic Clock (MAC) portfolio delivers significant advantages over traditional lamp-based rubidium clocks used in industrial holdover applications. With the industry's SA.35m 6 broadest operating temperature range (-10 C to 70 C), the SA.3Xm devices are the ideal choice for industrial applications requiring rubidium oscillator precision with no external physical connection. SA.33m Size (volume) 46 cm3/2.8 in3 Power (W) @ 25 C 5 SA.31m Phase Noise (dBc/Hz) 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz -70 -87 -114 -130 -140 -70 -87 -114 -130 -140 -65 -85 -112 -130 -140 Aging (monthly) <1E-10 <1E-10 <3E-10 TempCo (-10 C to 75 C) <1E-10 <1.5E-10 <1E-9 Allan Deviation 1s 10 s 100 s 3E-11 1.6E-11 8E-12 3E-11 1.6E-11 8E-12 5E-11 2.5E-11 1E-11 Timing ICs Timing ICs: From the Market Leader in SyncE Microsemi provides both SyncE alone (with an easy migration path to IEEE 1588) or combined SyncE and IEEE 1588 for frequency and time alignment. The market leader in Synchronous Ethernet timing devices, Microsemi was the first to introduce Synchronous Ethernet PLLs in 2006. Microsemi now offers the industry's most comprehensive portfolio of SyncE timing devices, providing G.8262 compliance and ultra-low jitter for PHYs up to 100G. SyncE for Timing Card Product Description DPLLs / NCOs BW (Hz) ZL30142 10 GbE Single SyncE and Telecom DPLL 1 ZL30143 10 GbE Dual SyncE and Telecom DPLL ZL30161 Split XO Feature Embedded LowGP Jitter Pkg Diff. CMOS Output PPS & Jitter Clock ps Size Outputs Outputs Frequency EPP2S APLLs Gen RMS mm Inputs Input Frequency 01. m-890 3 SE 2k, N x 8K, SDH, SyncE 1 2 2k, N x 8K, SDH, SyncE 1 1 1.0 9x9 2 01. m-890 8 SE 2k, N x 8K, SDH, SyncE 2 6 2k, N x 8K, SDH, SyncE 1 2 1.0 9x9 10 GbE Any-Frequency SyncE PLL/NCO 1 0.1 m-1 k 11 1 Hz- 750 MHz 6 6 1 Hz- 750 MHz 3 0 0.6 13 x 13 ZL30162 10 GbE Any-Frequency Quad SyncE PLL/NCO 4 0.1 m-1 k 11 1 Hz- 750 MHz 8 8 1 Hz- 750 MHz 4 0 0.6 13 x 13 ZL30163 10 GbE Any-Frequency Dual SyncE PLL/NCO 2 0.1 m-1 k 11 1 Hz- 750 MHz 8 8 1 Hz- 750 MHz 4 0 0.6 13 x 13 ZL30164 10 GbE Any-Frequency Triple SyncE PLL/NCO 3 0.1 m-1 k 11 1 Hz- 750 MHz 8 8 1 Hz- 750 MHz 4 0 0.64 13 x 13 ZL30621 10 GbE and above Single SyncE PLL/NCO 1 0.1 m-10 2 D/SE + 1 SE 8 kHz- 1250 MHz 3 6 <1 Hz- 1035 MHz 1 0 0.25 5 x 10 ZL30622 10 GbE and above Single SyncE PLL/NCO 1 0.1 m-500 2 D/SE + 1 SE 8 kHz- 1250 MHz 3 6 <1 Hz- 1035 MHz 1 0 0.25 ZL30623 10 GbE and above Dual SyncE PLL/NCO 2 0.1 m-500 4 D/SE + 1 SE 8 kHz- 1250 MHz 6 12 <1 Hz- 1035 MHz 2 0 0.25 5 x 10 ZL30601 Single Channel Network Synchronizer 1 0.1 m-448 * 5 D/10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 ZL30602 Dual Channel Network Synchronizer 2 0.1 m-448 * 5 D/10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 ZL30603 Triple Channel Network Synchronizer 3 0.1 m-448 * 5 D/10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 ZL30604 Quad Channel Network Synchronizer 4 0.1 m-448 * 5 D/10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 5x5 SyncE for Line Card Input Embedded Frequency PPS Outputs (Diff/ CMOS) Low-Jitter Output Jitter APLLs/GP Frequency ps RMS Clock Gen Pkg Size mm Product Description DPLLs BW (Hz) Inputs ZL30151 10 GbE and above Single SyncE PLL 1 1-500 2 D/SE + 1 SE 1 kHz- 650 MHz 0-3/0-6 <1 Hz- 650 MHz 1/0 0.25 5x5 ZL30165 10 GbE Any-Frequency Quad SyncE PLL/NCO 4 or (4 NCO) 5-896 8 D/SE 1 kHz- 750 MHz 8/8 1 kHz- 750 MHz 4/0 0.63 13 x 13 ZL30166 10 GbE Any-Frequency Triple SyncE PLL/NCO 3 or (3 NCO) 5-896 9 D/SE + 2 SE 1 kHz- 750 MHz 8/8 1 kHz- 750 MHz 4/0 0.63 13 x 13 ZL30167 10 GbE Any-Frequency Dual SyncE PLL/NCO 2 or (2 NCO) 5-896 9 D/SE + 2 SE 1 kHz- 750 MHz 8/8 1 kHz- 750 MHz 4/0 0.63 13 x 13 ZL30611 SyncE Line Card 1 or (1 NCO) 14-448 5 D/10 SE 1 kHz- 900 MHz * 6/14 0.5 Hz- 650 MHz 3/1 0.25 10 x 10 ZL30612 Dual SyncE Line Card 2 or (2 NCO) 14-448 5 D/10 SE 1 kHz- 900 MHz * 6/14 0.5 Hz- 650 MHz 3/1 0.25 10 x 10 ZL30614 Quad SyncE Line Card 4 or (4 NCO) 14-448 5 D/10 SE 1 kHz- 900 MHz * 6/14 0.5 Hz- 650 MHz 3/1 0.25 10 x 10 7 Timing ICs IEEE 1588 PLL IEEE 1588 is a protocol-based synchronization mechanism useful for existing unaware networks where frequency syntonization is required. When coupled with physical layer technologies such as Synchronous Ethernet, IEEE 1588 can also provide robust time alignment. Microsemi offers the industry's most comprehensive and cost effective IEEE 1588 solution with a range of products offering ultra-low jitter for PHYs up to 100G and IEEE 1588 profiles. IEEE 1588 for Timing Cards Split XO Input Inputs Feature Frequency Embedded GP Jitter Pkg Diff. CMOS Output Low-Jitter PPS & Clock ps Size Outputs Outputs Frequency APLLs EPP2S Gen RMS mm Product Description DPLLs BW (Hz) ZL30342 SyncE/SONET/SDH G.8262/ Stratum 3 and IEEE 1588 Packet G.8261 Synchronizer 1 NCO 0.1-890 3 SE N x 8K, SyncE 1 2 N x 8K, SDH, SyncE 1-Int-N 1 1.0 9x9 ZL30343 SyncE/SONET/SDH G.8262/ Stratum 3 and IEEE 1588 Packet G.8261 Synchronizer 2 NCO 0.1-890 8 SE N x 8K, SyncE 2 6 N x 8K, SDH, SyncE 1-Int-N 2 1.0 9x9 ZL30361 Single Channel Combined IEEE 1 NCO 1588 ToP and SyncE Device 0.1-896 11 1 Hz- 750 MHz 6 6 1 Hz- 750 MHz 3 0 0.6 13 x 13 ZL30362 Quad Channel Combined IEEE 4 NCO 1588 ToP and SyncE Device 0.1-896 11 1 Hz- 750 MHz 8 8 1 Hz- 750 MHz 4 0 0.6 13 x 13 ZL30363 Dual Channel Combined IEEE 2 NCO 1588 ToP and SyncE Device 0.1-896 11 1 Hz- 750 MHz 8 8 1 Hz- 750 MHz 4 0 0.6 13 x 13 ZL30364 Triple Channel Combined IEEE 3 NCO 1588 ToP and SyncE Device 0.1-896 11 1 Hz- 750 MHz 8 8 1 Hz- 750 MHz 4 0 0.64 13 x 13 ZL30721 Single Channel Combined IEEE 1 NCO 1588 ToP and SyncE Device 0.1-10 2 D/SE + 1 SE 8 kHz- 1250 MHz 3 6 <1 Hz- 1035 MHz 1 0 0.25 5 x 10 ZL30722 Single Channel Combined IEEE 1 NCO 1588 ToP and SyncE Device 0.1-500 2 D/SE + 1 SE 8 kHz- 1250 MHz 3 6 <1 Hz- 1035 MHz 1 0 0.25 ZL30723 Dual Channel Combined IEEE 2 NCO 1588 ToP and SyncE Device 0.1-500 4 D/SE + 1 SE 8 kHz- 1250 MHz 6 12 <1 Hz- 1035 MHz 2 0 0.25 5 x 10 5x5 ZL30701 Single Channel IEEE 1588 Synchronizer 1 or 0.1 m-448 (1 NCO) * 5 D/ 10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 ZL30702 Dual Channel IEEE 1588 Synchronizer 2 or 0.1 m-448 (2 NCO) * 5 D/ 10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 ZL30703 Triple Channel IEEE 1588 Synchronizer 3 or 0.1 m-448 (3 NCO) * 5 D/ 10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 ZL30704 Quad Channel IEEE 1588 Synchronizer 4 or 0.1 m-448 (4 NCO) * 5 D/ 10 SE 0.5 Hz- 900 MHz * 6 14 0.5 Hz- 900 MHz 2 or 3 1 0.25 10 x 10 IEEE 1588 for Line Cards 8 Product Description DPLLs BW (Hz) Inputs ZL30347 10 GbE Any Frequency Stratum 2/3E/3 DPLL 1 ZL30365 Quad Channel Combined IEEE 1588 ToP and SyncE Device 4 NCO 5-890 8 D/SE ZL30367 Dual Channel Combined IEEE 1588 ToP and SyncE Device 2 NCO 5-890 9 D/ SE+2 SE Input Diff. CMOS Frequency Outputs Outputs Output Low-Jitter GP Clock Jitter ps Pkg Size Frequency APLLs Gen RMS mm 2 6 N x 8K, SDH, SyncE 1-Int-N 2 1.0 9x9 1 Hz- 750 MHz 8 8 <1 Hz- 750 MHz 4 0 0.65 13 x 13 1 Hz- 750 MHz 6 6 <1 Hz- 750 MHz 3 0 0.65 13 x 13 0.5 m-400 2 D/SE Nx8k, SyncE Timing ICs Clock Management Microsemi's clock management portfolio provides devices for clock synthesis, frequency conversion, jitter attenuation, and fan out buffers to reduce bill of material costs and board space requirements, improve performance reliability, and simplify design complexity. Key features include industry-leading ultra-low jitter, high integration, wide frequency range, and highly programmable outputs. Clock Synthesis Devices Product Independent Output Freq. Families Inputs Crystal Input Freq. Range Xtal Osc. or CMOS Input Freq. Range Diff Input Freq. Range MAX24405 2 1 XTAL/SE, 3 D/SE 25 M-52 M 9.72 M-160 M 9.72 M-750 M 1801 - MAX24505 2 1 XTAL/SE, 3 D/SE 25 M-52 M 9.72 M-160 M 9.72 M-750 M 1801 MAX24410 2 1 XTAL/SE, 3 D/SE 25 M-52 M 9.72 M-160 M 9.72 M-750 M MAX24510 2 1 XTAL/SE, 3 D/SE 25 M-52 M 9.72 M-160 M ZL30250 1 1 XTAL/SE, 3 D/SE 25 M-60 M ZL30251 1 1 XTAL/SE, 3 D/SE ZL30244 2 ZL30245 2 Abbreviation Key: Output Freq. Range NV Memory Host Bus Pkg Size, mm 0-5/0-10 <1 Hz-750 M Ext EE SPI 10 x 10 - 0-5/0-10 <1 Hz-750 M Int EE SPI 10 x 10 1801 - 0-10/0-20 <1 Hz-750 M Ext EE SPI 10 x 10 9.72 M-750 M 1801 - 0-10/0-20 <1 Hz-750 M Int EE SPI 10 x 10 9.72 M-300 M 9.72 M-1250 M 1601 0.01 0-3/0-6 <1 Hz-1035 M2 Ext EE3 SPI/I2C 5x5 25 M-60 M 9.72 M-300 M 9.72 M-1250 M 1601 0.01 0-3/0-6 <1 Hz-1035 M2 Int EE3 SPI/I2C 5x5 2 XTAL/SE, 6 D/SE 25 M-60 M 9.72 M-300 M 9.72 M-1250 M 1601 0.01 0-6/0-12 <1 Hz-1035 M2 Ext EE3 SPI/I2C 5 x 10 2 XTAL/SE, 6 D/SE 25 M-60 M 9.72 M-300 M 9.72 M-1250 M 1601 0.01 0-6/0-12 <1 Hz-1035 M2 Int EE3 SPI/I2C 5 x 10 D = Differential Ext EE = External EEPROM 1 = Integer-mode APLL-only operation Typical NCO Outputs Jitter fs ppb Diff/CMOS RMS SE = Single-ended (CMOS) Int EE = Internal EEPROM 2 = Spread spectrum capable NCO = Numerically controlled oscillator Supply Voltage = 3.3+1.8 3 = Up to four configurations pin-selectable Rate Conversion/Jitter Attenuation Devices Crystal Input Freq. Range Independent Output Freq. Families MAX24605 2 1 XTAL/SE, 25 M-52 M 2 KHz-160 M 2 KHz-750 M 3 D/SE 1801 Glitchless/ Digital Hold/ 4 Hz-400 Hz <0.001 0-5/0-10 <1 Hz-750 M Ext EE SPI 10 x 10 MAX24610 2 1 XTAL/SE, 25 M-52 M 2 KHz-160 M 2 KHz-750 M 3 D/SE 1801 Glitchless/ Digital Hold/ 4 Hz-400 Hz <0.001 0-10/0-20 <1 Hz-750 M Ext EE SPI 10 x 10 ZL30252 1 1 XTAL/SE, 25 M-60 M 3 D/SE 1 kHz-300 M 1 kHz-1250 M 1601 Glitchless/ Digital Hold/ 14 Hz-500 Hz 0.01 0-3/0-6 <1 Hz-1035 M2 Ext EE3 SPI/ 5x5 I2C ZL30253 1 1 XTAL/SE, 25 M-60 M 3 D/SE 1 kHz-300 M 1 kHz-1250 M 1601 Glitchless/ Digital Hold/ 14 Hz-500 Hz 0.01 0-3/0-6 <1 Hz-1035 M2 Int EE3 SPI/ 5x5 I2C ZL30254 1 <1ps Glitchless/ Digital Hold/ 25 Hz - ZL30255 2 1601 Glitchless/ Digital-Hold/ 14 Hz-500 Hz 0.01 Abbreviation Key: Inputs 1 XTAL, 2 SE 49.152 MHz 2 XTAL/SE, 25 M-60 M 6 D/SE XTAL Osc. or CMOS Input Freq. Range 8 kHz or 25 MHz Diff Input Freq. Range DPLL Features: Typical Pkg Ref. Switching/ NCO Outputs Output Freq. NV Host Jitter fs Size, Holdover/ ppb Diff/CMOS Range Memory Bus RMS mm Bandwidth Product - 1 kHz-300 M 1 kHz-1250 M D = Differential Ext EE = External EEPROM 1 = Integer-mode APLL-only operation SE = Single-ended (CMOS) Int EE = Internal EEPROM 2 = Spread spectrum capable 2/0 125 MHz or 156.25 MHz - 0-6/0-12 <1 Hz-1035 M2 Int EE3 None 5 x 5 SPI/ 5 x 10 I2C NCO = Numerically controlled oscillator Supply Voltage = 3.3+1.8 3 = Up to four configurations pin-selectable 9 Timing ICs Microsemi high-performance buffers deliver industry leading power supply noise rejection performance and low additive jitter. This preserves signal integrity resulting in high performance while simplifying engineering board design efforts. Precision Differential Fanout Buffers Product Output Type Inputs Outputs ZL40200 2 ZL40201 ZL40202 4 ZL40203 1 ZL40204 6 ZL40205 ZL40206 ZL40207 8 ZL40225 2 ZL40209 ZL40210 ZL40212 2 ZL40213 ZL40214 4 1 ZL40216 6 ZL40217 ZL40219 6 8 ZL40211 ZL40215 8 ZL40227 ZL40221 ZL40222 ZL40223 10 Input Operating Power Operating Coupling Frequency Supply, V Temp., C Pkg Pkg Size, mm Internal External QFN-16 3x3 Internal External QFN-32 5x5 QFN-16 3x3 QFN-32 5x5 N/A 30-40 Internal Internal External Simple External Internal External Glitch Free 106-121 LVPECL LVDS HCSL CML Internal External Internal External Internal External DC or AC Up to 750 MHz 2.5 or 3.3 -40 to 85 N/A 78-138 Internal External LVDS ZL40226 ZL40220 Input Type External Internal ZL40208 750 MHz Additive Jitter fs RMS typ External LVPECL ZL40224 ZL40218 Input Switching Termination Internal External Internal 2 6 8 Simple External Internal External Internal Glitch Free 165-194 FPGAs FPGAs: Best-in-Class for Industrial IoT Infrastructure Microsemi SmartFusion2 SoC FPGAs offer more resources in low density devices with the lowest power, proven security features, and exceptional reliability. These Flash FPGA devices are ideal for general purpose functions such as Gigabit Ethernet or dual PCI Express control planes, bridging functions, input/output (I/O) expansion and conversion, video/image processing, system management, and secure connectivity. Microsemi's SoC FPGAs enable a wide variety of these complex systems, deployed at the lowest power and smallest form factor. These FPGAs also deploy best-in-class security solutions that prevent tampering, counterfeiting, and installation of malicious code. Key Features * 166 MHz ARM Cortex-M3 with hard 10/100/100 Ethernet MAC * Continued use of heterogenous installed base of Ethernet/fieldbus equipment * Industrial Ethernet protocol support on a single FPGA platform, lowering TCO * Broad array of SoC IP with all the different building blocks needed for Industrial Ethernet communications (including system I/O expansion, glue logic, and other communications interfaces) * Ethernet protocols supported: MII, RGMII, GMII, SGMII Features2,3 M2S005 M2S010 M2S025 M2S050 M2S060 M2S090 M2S150 Maximum Logic Elements (4LUT + DFF)1 6,060 12,084 27,696 56,340 56,520 86,184 146,124 11 22 34 72 72 84 Math Blocks (18x18) Logic/DSP Fabric Interface Controllers (FICs) 1 PLLs and CCCs 2 2 Data Security High Speed User I/Os Grades 8 AES256, SHA256, RNG, ECC, PUF Yes eNVM (K Bytes) Fabric Memory 2 6 AES256, SHA256, RNG Cortex-M3 + Instruction cache MSS 240 1 128 256 512 eSRAM (K Bytes) 64 eSRAM (K Bytes) Non SECDED 80 CAN, 10/100/1000 Ethernet, HS USB 1 each Multi-Mode UART, SPI, I2C, Timer 2 each LSRAM 18K Blocks 10 21 31 69 69 109 uSRAM1K Blocks 11 22 34 72 72 112 240 Total RAM (K bits) 191 400 592 1314 1314 2074 4488 DDR Controllers (Count x Width) 1x18 2x36 0 4 SERDES Lanes (T) PCIe End Points 0 271 8 4 1 236 1x18 2x36 4 16 2 4 MSIO (3.3 V) 115 123 157 139 271 309 292 MSIOD (2.5 V) 28 40 40 62 40 40 106 DDRIO (2.5 V) 66 70 70 176 76 76 176 Total User I/O 209 233 267 377 387 425 574 Commercial (C), Industrial (I), Military (M) C, I C, I, M 1 Total logic may vary based on utilization of DSP and memories in your design. Please see the IGLOO2 Fabric UG for details 2 Feature availability is package dependent 3 Data security features are only available in `S' and `TS' devices 11 Signal Conditioners and Crosspoint Switches Signal Conditioners and Crosspoint Switches: For the Ultimate in Flexibility & Performance Microsemi offers a wide range of signal conditioner and crosspoint switch ICs across port speeds, channel counts, and practical feature sets for industrial applications. Microsemi products deliver many industry-leading features such as very low jitter as well as autonomous equalization for demanding backplane, module host, and high port count Layer-1 switching applications. Microsemi's low power, multiprotocol family of signal conditioners includes both redrivers and retimers and delivers the ultimate in flexibility and performance. Key Features * Data rates up to 16 Gbps * Per channel output multi-tap de-emphasis and drive level adjustment * Per channel adaptive input equalization and gain adjustment * Power-saving green mode options including ability to power down unused ports Product Number Ports Device Type Min Temp (Ambient) Max Temp (Junction) Max Data Rate VSC7111 Dual 2x2 Redriver -40 C 110 C 11.5 Gbps VSC7113 Dual 2x2 Redriver -40 C 110 C 10.3 Gbps VSC7223 4 Retimer -40 C 90 C VSC7224 4 Retimer -40 C 110 C 12.5 Gbps VSC7227 12 Retimer -40 C 100 C 14.5 Gbps VSC8247 4 Retimer 0 C 95 C 11.3 Gbps VSC8248 4 (bi-dir) Retimer 0 C 95 C 11.3 Gbps VSC3308 8x8 Redriver -40 C 100 C 11.5 Gbps VSC3316 16x16 Redriver -40 C 100 C 11.5 Gbps 16 Gbps Why Microsemi for IIoT Networking? Microsemi is the only IC, systems, and software provider with a power-optimized, flexible, and reliable industrial Ethernet networking portfolio that supports Ethernet interfaces and fieldbus protocols for a broad range of Industrial Ethernet applications, enabling highly reliable, and secure IIoT networks. Contact us today to learn how you can get to market faster with Microsemi IIoT solutions. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Fax: +1 (949) 215-4996 Email: sales.support@microsemi.com www.microsemi.com (c)2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com. Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer's responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. IE Network Solutions 1.0. 08/16