DP800 Series Programmable Linear DC Power Supply DP832A/DP832: 3 outputs, 30V/3A || 30V/3A, 5V/3A, total power up to 195W DP831A/DP831: 3 outputs, 8V/5A || 30V/2A, -30V/2A, total power up to 160W DP821A/DP821: 2 outputs, 60V/1A || 8V/10A, with remote Sense, total power up to 140W DP811A/DP811: 1 output, 20V/10A (Low Range), 40V/5A (High Range), with remote Sense, total power up to 200W Low ripple and noise: <350Vrms/2mVpp Excellent linear regulation rate and load regulation rate Fast transient response time: <50s Some channels are isolated Standard OVP/OCP/OTP protection functions Standard timing output Built-in V,A,W measurements and waveform display Independent control for each channel Support more advanced functions: timer and delay output(standard), recorder/analyzer/monitor/trigger(standard in models with "A" and optional in other models) 3.5 inch TFT display Various interfaces: USB Host&Device(standard), USB-GPIB (optional), LAN/RS232/Digital IO(standard in models with "A" and optional in other models) RIGOL TECHNOLOGIES, INC. Design Features Wide-screen Display, User-friendly Interface, Easy Operation Observable Clean Stable Reliable Affordable Channel Setting LCD Display Power Button Parameter Input Output Terminal Advanced Function Area Menu Softkey Display Switching Complete Connectivity Product Dimensions: Width x Height x Depth = 239mm x 157mm x 418mm Weight: 9.75kg (DP831A) Typical Applications R&D lab general purpose testing Quality control and assessment Pure power for RF/MW circuits or components Power supply for automobile electronic circuit test Production automation testing Device or circuit characteristic verification and troubleshooting Educational experiment Intuitive User Interface DP831A GUI Timing Output Setting V/A/W Waveform Display Output Analysis Output Monitor Setting Trigger In/Out Output On/Off Delay LAN Setting Specifications All the specifications are guaranteed when the instrument has been working for more than 30 minutes under the specified operation temperature. Unless otherwise noted, the specifications are applicable to all the channels of the specified model. DP832A/DP831A/DP821A/DP811A Specifications Model Number of Channels DP832A 3 DP831A 3 DP821A 2 DP811A 1 (two output ranges) DC Output (0 to 40 ) Channel (Range) Voltage/Current OVP/OCP DP832A CH1 CH2 CH3 0 to 30V/0 to 3A 0 to 30V/0 to 3A 0 to 5V/0 to 3A 1mV to 33V/1mA to 3.3A 1mV to 33V/1mA to 3.3A 1mV to 5.5V/1mA to 3.3A DP831A CH1 CH2 CH3 0 to 8V/0 to 5A 0 to 30V/0 to 2A 0 to -30V/0 to 2A 1mV to 8.8V/0.1mA to 5.5A 1mV to 33V/0.1mA to 2.2A -1mV to -33V/0.1mA to 2.2A DP821A CH1 CH2 0 to 60V/0 to 1A 0 to 8V/0 to 10A 1mV to 66V/0.1mA to 1.1A 1mV to 8.8V/1mA to 11A DP811A Range1 Range2 0 to 20V/0 to 10A 0 to 40V/0 to 5A 1mV to 22V/0.1mA to 11A 1mV to 44V/0.1mA to 5.5A Load Regulation Rate (Output Percentage + Offset) Voltage <0.01% + 2mV Current <0.01% + 250A Linear Regulation Rate (Output Percentage + Offset) Voltage <0.01% + 2mV Current <0.01% + 250A Ripples and Noise (20Hz to 20MHz) Normal Mode Voltage <350Vrms/2mVpp Normal Mode Current <2mArms Annual Accuracy [1] (25 5 ) (Output Percentage + Offset) Programming Channel Readback Voltage Current Voltage Current DP832A CH1 CH2 CH3 0.05% + 20mV 0.05% + 20mV 0.1% + 5mV 0.2% + 5mA 0.2% + 5mA 0.2% + 5mA 0.05% + 10mV 0.05% + 10mV 0.1% + 5mV 0.15% + 5mA 0.15% + 5mA 0.15% + 5mA DP831A CH1 CH2 CH3 0.1% + 5mV 0.05% + 20mV 0.05% + 20mV 0.2% + 10mA 0.2% + 5mA 0.2% + 5mA 0.1% + 5mV 0.05% + 10mV 0.05% + 10mV 0.2% + 10mA 0.1% + 5mA 0.1% + 5mA DP821A CH1 CH2 0.1% + 25mV 0.05% + 10mV 0.2% + 10mA 0.2% + 10mA 0.1% + 25mV 0.05% + 5mV 0.15% + 10mA 0.15% + 10mA DP811A CH1 0.05% + 10mV 0.1% + 10mA 0.05% + 10mV 0.1% + 10mA Resolution Programming Channel DP832A Voltage CH1 CH2 CH3 1mV 1mV 1mV Readback Current 1mA 1mA 1mA Voltage Current 0.1mV 0.1mV 0.1mV 0.1mA 0.1mA 0.1mA Display Voltage 1mV 1mV 1mV Current 1mA 1mA 1mA DP831A CH1 CH2 CH3 1mV 1mV 1mV 0.3mA 0.1mA 0.1mA 0.1mV 0.1mV 0.1mV 0.1mA 0.1mA 0.1mA 1mV 1mV 1mV 1mA 1mA 1mA DP821A CH1 CH2 1mV 1mV 0.1mA 1mA 1mV 1mV 0.1mA 1mA 1mV 1mV 0.1mA 1mA DP811A CH1 1mV 0.5mA 0.1mV 0.1mA 1mV 1mA Transient Response Time Less than 50s for output voltage to recover to within 15mV following a change in output current from full load to half load or vice versa. Command Processing Time [2] <118ms OVP/OCP Accuracy (Output Percentage + Offset) 0.5% + 0.5V/0.5% + 0.5A Voltage Programming Control Speed (1% within the total variation range) Rise Channel Fall Full Load No Load Full Load No Load DP832A CH1 CH2 CH3 <50ms <50ms <15ms <33ms <38ms <14ms <46ms <46ms <24ms <400ms <400ms <100ms DP831A CH1 CH2 CH3 <18ms <33ms <35ms <17ms <36ms <42ms <20ms <44ms <45ms <200ms <400ms <400ms DP821A CH1 CH2 <110ms <15ms <30ms <15ms <110ms <20ms <800ms <400ms DP811A CH1 <45ms <42ms <51ms <1089ms Temperature Coefficient per (Output Percentage + Offset) Channel Voltage Current DP832A CH1 CH2 CH3 0.01% + 5mV 0.01% + 5mV 0.01% + 2mV 0.01% + 2mA 0.01% + 2mA 0.01% + 2mA DP831A CH1 CH2 CH3 0.01% + 2mV 0.01% + 2mV 0.01% + 2mV 0.02% + 3mA 0.02% + 3mA 0.02% + 3mA DP821A CH1 CH2 0.01% + 3mV 0.01% + 3mV 0.02% + 3mA 0.02% + 3mA DP811A CH1 0.01% + 3mV 0.02% + 3mA Stability [3] (Output Percentage + Offset) Channel Voltage Current DP832A CH1 CH2 CH3 0.02% + 2mV 0.02% + 2mV 0.01% + 1mV 0.05% + 2mA 0.05% + 2mA 0.05% + 2mA DP831A CH1 CH2 CH3 0.03% + 1mV 0.02% + 2mV 0.02% + 2mV 0.1% + 3mA 0.05% + 1mA 0.05% + 1mA DP821A CH1 CH2 0.02% + 1mV 0.02% + 1mV 0.1% + 1mA 0.1% + 1mA DP811A CH1 0.02% + 1mV 0.1% + 1mA Mechanical Dimensions 239mm(W) x 157mm(H) x 418mm(D) Weight DP832A: 10.5kg DP831A: 9.75kg DP821A: 10.0kg DP811A: 10.3kg Power AC Input (50Hz to 60Hz) 100Vac 10%, 115Vac 10%, 230Vac 10% (maximum 250Vac Maximum Input Power DP832A: 521VA DP831A: 416VA DP821A: 450VA DP811A: 503VA I/O USB DEVICE 1 USB HOST 1 LAN 1 RS232 1 Digital IO 1 USB-GPIB 1 (Option, extend a GPIB interface using the USB-GPIB interface converter) Rear Output Interface 1 for DP811A Environment Cooling Method Fan Cooling Working Temperature 0 to 40 Storage Temperature -40 to 70 Humidity 5% to 80% relative humidity Altitude Below 1500m Note[1]: The accuracy parameters are acquired via calibration under 25 after 1-hour warm-up. Note[2]: The maximum time required for the output to change accordingly after receiving the APPLy and SOURce commands. Note[3]: The variation of the output within 8 hours after 30-minute warm-up when the load circuit and environment temperature are constant. DP832/DP831/DP821/DP811 Specifications Model Number of Channels DP832 3 DP831 3 DP821 2 DP811 1 (two output ranges) DC Output (0 to 40 ) Channel (Range) Voltage/Current OVP/OCP DP832 CH1 CH2 CH3 0 to 30V/0 to 3A 0 to 30V/0 to 3A 0 to 5V/0 to 3A 10mV to 33V/1mA to 3.3A 10mV to 33V/1mA to 3.3A 10mV to 5.5V/1mA to 3.3A DP831 CH1 CH2 CH3 0 to 8V/0 to 5A 0 to 30V/0 to 2A 0 to -30V/0 to 2A 10mV to 8.8V/1mA to 5.5A 10mV to 33V/1mA to 2.2A -10mV to -33V/1mA to 2.2A DP821 CH1 CH2 0 to 60V/0 to 1A 0 to 8V/0 to 10A 10mV to 66V/10mA to 1.1A 10mV to 8.8V/10mA to 11A DP811 Range1 Range2 0 to 20V/0 to 10A 0 to 40V/0 to 5A 10mV to 22V/10mA to 11A 10mV to 44V/10mA to 5.5A Load Regulation Rate (Output Percentage + Offset) Voltage <0.01% + 2mV Current <0.01% + 250A Linear Regulation Rate (Output Percentage + Offset) Voltage <0.01% + 2mV Current <0.01% + 250A Ripples and Noise (20Hz to 20MHz) Normal Mode Voltage <350Vrms/2mVpp Normal Mode Current <2mArms Annual Accuracy [1] (25 5 ) (Output Percentage + Offset) Programming Channel Readback Voltage Current Voltage Current DP832 CH1 CH2 CH3 0.05% + 20mV 0.05% + 20mV 0.1% + 5mV 0.2% + 5mA 0.2% + 5mA 0.2% + 5mA 0.05% + 10mV 0.05% + 10mV 0.1% + 5mV 0.15% + 5mA 0.15% + 5mA 0.15% + 5mA DP831 CH1 CH2 CH3 0.1% + 5mV 0.05% + 20mV 0.05% + 20mV 0.2% + 10mA 0.2% + 5mA 0.2% + 5mA 0.1% + 5mV 0.05% + 10mV 0.05% + 10mV 0.2% + 10mA 0.1% + 5mA 0.1% + 5mA DP821 CH1 CH2 0.1% + 25mV 0.05% + 10mV 0.2% + 10mA 0.2% + 10mA 0.1% + 25mV 0.05% + 5mV 0.15% + 10mA 0.15% + 10mA DP811 CH1 0.05% + 10mV 0.1% + 10mA 0.05% + 10mV 0.1% + 10mA Resolution Programming Channel DP832 DP831 DP821 DP811 Readback Display Voltage Current Voltage Current Voltage Current Standard CH1 CH2 CH3 10mV 10mV 10mV 1mA 1mA 1mA 10mV 10mV 10mV 1mA 1mA 1mA 10mV 10mV 10mV 10mA 10mA 10mA With the highresolution option CH1 CH2 CH3 1mV 1mV 1mV 1mA 1mA 1mA 0.1mV 0.1mV 0.1mV 0.1mA 0.1mA 0.1mA 1mV 1mV 1mV 1mA 1mA 1mA Standard CH1 CH2 CH3 1mV 10mV 10mV 1mA 1mA 1mA 1mV 1mV 1mV 1mA 1mA 1mA 10mV 10mV 10mV 10mA 10mA 10mA With the highresolution option CH1 CH2 CH3 1mV 1mV 1mV 0.3mA 0.1mA 0.1mA 0.1mV 0.1mV 0.1mV 0.1mA 0.1mA 0.1mA 1mV 1mV 1mV 1mA 1mA 1mA Standard CH1 CH2 10mV 10mV 1mA 10mA 10mV 10mV 1mA 10mA 10mV 10mV 1mA 10mA With the highresolution option CH1 CH2 1mV 1mV 0.1mA 1mA 1mV 1mV 0.1mA 1mA 1mV 1mV 0.1mA 1mA Standard CH1 10mV 10mA 1mV 1mA 10mV 10mA With the highresolution option CH1 1mV 0.5mA 0.1mV 0.1mA 1mV 1mA Transient Response Time Less than 50s for output voltage to recover to within 15mV following a change in output current from full load to half load or vice versa. Command Processing Time [2] <118ms OVP/OCP Accuracy (Output Percentage + Offset) 0.5% + 0.5V/0.5% + 0.5A Voltage Programming Control Speed (1% within the total variation range) Rise Channel Fall Full Load No Load Full Load No Load DP832 CH1 CH2 CH3 <50ms <50ms <15ms <33ms <38ms <14ms <46ms <46ms <24ms <400ms <400ms <100ms DP831 CH1 CH2 CH3 <18ms <33ms <35ms <17ms <36ms <42ms <20ms <44ms <45ms <200ms <400ms <400ms DP821 CH1 CH2 <110ms <15ms <30ms <15ms <110ms <20ms <800ms <400ms DP811 CH1 <45ms <42ms <51ms <1089ms Temperature Coefficient per (Output Percentage + Offset) Channel Voltage Current DP832 CH1 CH2 CH3 0.01% + 5mV 0.01% + 5mV 0.01% + 2mV 0.01% + 2mA 0.01% + 2mA 0.01% + 2mA DP831 CH1 CH2 CH3 0.01% + 2mV 0.01% + 2mV 0.01% + 2mV 0.02% + 3mA 0.02% + 3mA 0.02% + 3mA DP821 CH1 CH2 0.01% + 3mV 0.01% + 3mV 0.02% + 3mA 0.02% + 3mA DP811 CH1 0.01% + 3mV 0.02% + 3mA Stability [3] (Output Percentage + Offset) Channel Voltage Current DP832 CH1 CH2 CH3 0.02% + 2mV 0.02% + 2mV 0.01% + 1mV 0.05% + 2mA 0.05% + 2mA 0.05% + 2mA DP831 CH1 CH2 CH3 0.03% + 1mV 0.02% + 2mV 0.02% + 2mV 0.1% + 3mA 0.05% + 1mA 0.05% + 1mA DP821 CH1 CH2 0.02% + 1mV 0.02% + 1mV 0.1% + 1mA 0.1% + 1mA DP811 CH1 0.02% + 1mV 0.1% + 1mA Mechanical Dimensions 239mm(W) x 157mm(H) x 418mm(D) Weight DP832: 10.5kg DP831: 9.75kg DP821: 10.0kg DP811: 10.3kg Power AC Input (50Hz-60Hz) 100Vac 10%, 115Vac 10%, 230Vac 10% (maximum 250Vac) Maximum Power DP832: 521VA DP831: 416VA DP821: 450VA DP811: 503VA I/O USB DEVICE 1 USB HOST 1 LAN 1 (Option) RS232 1 (Option) Digital IO 1 (Option) USB-GPIB 1 (Option, extend a GPIB interface using the USB-GPIB interface converter) Rear Output Interface 1 for DP811 Environment Cooling Method Fan Cooling Working Temperature 0 to 40 Storage Temperature -40 to 70 Humidity 5% to 80% relative humidity Altitude Below 1500m Note[1]: The accuracy parameters are acquired via calibration under 25 after 1-hour warm-up. Note[2]: The maximum time required for the output to change accordingly after receiving the APPLy and SOURce commands. Note[3]: The variation of the output within 8 hours after 30-minute warm-up when the load circuit and environment temperature are constant. Ordering Information Models Standard Accessories Optional Accessories Warranty Description Order NO. Programmable Linear DC Power Supply (Three-channel) DP832A Programmable Linear DC Power Supply (Three-channel) DP832 Programmable Linear DC Power Supply (Three-channel) DP831A Programmable Linear DC Power Supply (Three-channel) DP831 Programmable Linear DC Power Supply (Dual-channel) DP821A Programmable Linear DC Power Supply (Dual-channel) DP821 Programmable Linear DC Power Supply (Single-channel) DP811A Programmable Linear DC Power Supply (Single-channel) DP811 Power Cord -- USB Cable CB-USBA-USBB-FF-150 Fuse 50T-032H 250V 3.15A (DP832A/DP832/DP811A/DP811) Fuse 50T-025H 250V 2.5A (DP831A/DP831/DP821A/DP821) -- Short-circuit Equipment (DP821A/DP821/DP811A/DP811) -- Quick Guide (Hard Copy) -- Digital I/O Interface Connecting Terminal Terminal-Digital I/O-DP800 Provide high-resolution setting (for DP832/DP831/DP821/DP811; for the other models, this is a standard accessory) HIRES-DP800 Provide 4 trigger input and output channels (for DP832/DP831/DP821/DP811; for the other models, this is a standard accessory) DIGITALIO-DP800 Provide on-line monitor and analysis functions (for DP832/DP831/DP821/ DP811; for the other models, this is a standard accessory) AFK-DP800 Provide RS232 and LAN communication interfaces (for DP832/DP831/DP821/ DP811; for the other models, this is a standard accessory) INTERFACE-DP800 USB to GPIB Interface Converter USB-GPIB DP800 Series Rack Mount Kit (Single Instrument) RM-1-DP800 DP800 Series Rack Mount Kit (Two Instruments) RM-2-DP800 DP800 Series Red Safety Plug SPR-DP800 DP800 Series Black Safety Plug SPB-DP800 DP800 Series Green Safety Plug SPG-DP800 Three-year warranty, excluding accessories. HEADQUARTER EUROPE NORTH AMERICA JAPAN RIGOL TECHNOLOGIES, INC. No.156,Cai He Village, Sha He Town, Chang Ping District, Beijing, 102206 P.R.China Tel:+86-10-80706688 Fax:+86-10-80705070 Electronic Measurement Instrument service and support email:EMD_support@rigol.com Chemical Analysis Instrument service and support email:service. chem@rigol.com RIGOL TECHNOLOGIES GmbH Lindbergh str. 4 82178 Puchheim Germany Tel: 0049- 89/89418950 Email: info-europe@rigoltech.com RIGOL TECHNOLOGIES, USA INC. 10200 SW Allen Blvd, Suite C Beaverton, OR 97005, USA Toll free: 877-4-RIGOL-1 Office: (440) 232-4488 Fax: (216)-754-8107 Email: info@rigol.com RIGOL TECHNOLOGIES JAPAN G.K. Tonematsu Bldg. 5F, 2-33-8 NihonbashiNingyocho, Chuo-ku, Tokyo 103-0013 Japan Tel: +81-3-6264-9251 Fax: +81-3-6264-9252 Email: info-japan@rigol.com RIGOL(R) is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL office or access RIGOL official website: www.rigol.com December 2015