Data Sheet INSP-3 Wiring Inspector Tester The INSP-3, wiring inspector is a rugged tester designed to verify building wiring compliance to electrical code, especially voltage drop under load. Identify issues with splices, connections and conductor quality, crucial to safety and performance of the electrical system. No hassle warranty No waiting. No shipping charges. Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: $500 MSLP limit) Amprobe(R) Test Tools n Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed n Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load n Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers: n Faulty splices and connections n Incorrect wiring n Undersized wiring n Faulty GFCIs, n Faulty or incorrectly wired AFCIs n Incorrect line voltage n Poor ground quality n User selectable 0, 10,15 and 20 amps loads to verify performance of the electrical system n Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen n Will not trip circuit breakers or blow fuses during the test n Tests GFCI and AFCI operations n Check ground quality for safety and ability to support sensitive electronic equipment n Measure fault currents n Save money and time by eliminating guess work www.Amprobe.com INSP-3 Wiring Inspector Tester Data Sheet Specifications Load Operating Voltage Battery Fuse GFI Trip AFCI Trip Operating Temperature Accuracy Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage 95-140 VAC 9V Alkaline 1/2 Amp, 125 Volt 6.0 mA nominal to trip GFI, 30 mA to trip RCD Up to 8, 120 AMP pulses within 1/2 second period 32F to 120F (0 - 50C) +/-2%, +/- 2 digits Included Accessories Power Cord 9V Alkaline Battery (Installed) Users Manual Carrying Case Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE Amprobe(R) Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2010 Amprobe Test Tools. All rights reserved. 7/2010 INSP-3_DS Rev A Amprobe(R) Test Tools www.Amprobe.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AMPROBE: 3503207