https://www.phoenixcontact.com/us/products/2903668
12/16/2020Page2/7
Single relay-REL-IR2/L-230AC/2X21-2903668
Technical data
Coil side
Input voltage range in reference to UNsee diagram
Mains frequency 50/60 Hz
Typical input current at UN6.5 mA
Typical response time 5 ms ... 15 ms (depending on phase relation)
Typical release time range 5 ms ... 20 ms (depending on phase relation)
Status display Yellow LED
Power dissipation for nominal condition 1.5 W
Contact side
Contact type 2 PDT
Type of switch contact Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (At 24 mA)
Min. switching current 5 mA (at 24V)
Maximum inrush current 30 A (20 ms, N/O contacts)
Limiting continuous current 12 A
Interrupting rating (ohmic load) max. 288 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
3000 VA (for 250 V AC)
Switching capacity min. 0.12 W
Motor load according to UL 508 1/2HP, 240VAC
General
Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact 2.5 kVrms (50 Hz, 1 min.)
Test voltage PDT/PDT 2.5 kVrms (50 Hz, 1 min.)
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Service life, electrical see diagram
Mounting position any
Connection data
Connection method Plug connection
Standards and Regulations