5246 PAPST cat REPRO 6/9/00 3:58 pm Page 9 air filters changed without the equipment having to be fan filter assemblies - PMFA `T' Series switched off. The pad is manufactured from white polyester type KS-22. Description A family of low profile filter assemblies Filter Performance designed for use with both 80mm2 and The KS-22 pad will achieve a 60% dust 119mm2 PAPST axial fans. In both cases, particle retention and is heat resistant to the filter assemblies mount directly on to the 100C. A reduction in airflow of around existing fixing locations. The `T' series is a 10-30% can be expected in some applications compact design yet very robust for where when fitting the filter assembly. space is at a premium. Features Construction * Compact, low profile design The assembly consists of four parts, an outer * Rigged construction cover, a filter pad, a mesh screen and * Quick change filter pad a finger guard. The cover, mesh and finger * Fits both 80mm2 and 119mm2 fans guard are moulded in `Zytel' nylon resin. * Utilise existing hole fixing positions The inclusion of a finger guard as part of the * Filter pad can be changed without switching off fan as the finger guard remains in place. assembly will allow the filter medium to be Dimensions Fan size A B C D 80mm2 86.5 86.5 11 71.5 119mm2 126 126 13.5 104.8 A C Finger Guard Filter Pad Mesh D Cover B Finger Guard Cover Ordering information (filter assemblies) Fan series Size Part number 8000 80mm2 PMFA80T 4000 119mm2 PMFA120T Ordering information (spare filter pads) Filter assembly Pack details Part number PMFA80T Pack of 5 FP80T PMFA120T Pack of 5 FP120T All measurements in mm. Papst plc East Portway Andover Hampshire SP10 3RT Tel +44 (0)1264 333388 Fax +44 (0)1264 332182 www.papstplc.com Fit it. Forget it. 5246 PAPST cat REPRO 6/9/00 3:58 pm Page 10 air filters fan filter assemblies - PMFA Series protection when the filter pad is changed Description The filter pad is made of white synthetic A family of filters for use with the main sizes bonded fibre to specification P15/150R. of axial fans, i.e. 60mm2, 80mm2, 92mm2, Filter Performance 119mm2 and 150/172mm diameter. The filter pad will achieve a 75% dust particle with the fan still running. All filter assemblies mount directly on retention down to 5-10 microns in size and to the existing fixing locations. The 60mm2 can withstand temperatures of up to 100C. assembly is compact and low profile by The pad is also flame resistant to BS2963. design, with a similar version also available A reduction in airflow of around 20-30% can in the 80mm2 model. be expected with a clean filter assembly fitted. Construction Features The assembly consists of three parts; an outer * Tough, durable construction grill cover, an inner fixing plate and a filter pad. * Quick change filter pad The grill cover is moulded in polycarbonate * Fit fans from 60mm2 to O172mm with a matt finish. It incorporates quick release * Utilise existing hole fixing positions on most fasteners to assist easy changing of the filter pad. The inner fixing plate is constructed of PAPST fans * Filter pad can be changed without switching steel sheet, with a matt black epoxy powder off fan. finish. A welded wire screen provides Ordering Information (filter assemblies) Inner Plate Filter Pad Grill Cover Part No. Fan size A B C D PMFA60L 60mm2 65 65 13.5 50 PMFA80L 80mm PMFA80 80mm2 PMFA90 92mm2 PMFA120 PMFA160 85 85 14 71.5 125 105 17.5 71.5 125 105 17.5 82.5 119mm 162 136 18.5 104.8 150/172O 226 190 19.5 162 2 2 Ordering Information (spare filter pads) Pad Part No. Assembly Part No. Pack Qty FP60L PMFA60L 5 FP80L PMFA80L 5 FP80 PMFA80 5 FP90 PMFA90 5 PMFA120 PMFA120 5 PMFA160 PMFA160 5 All measurements in mm. Papst plc East Portway Andover Hampshire SP10 3RT Tel +44 (0)1264 333388 Fax +44 (0)1264 332182 www.papstplc.com Fit it. Forget it.