1
www.clare.com
XS170
DS-XS170-R1
XS170 is a 350V, 100mA, 501-Form-A relay with an
optocoupler in a single package. It provides an economi-
cal solution for cost sensitive applications.
Telecommunications
Telecom Switching
Tip/Ring Circuits
Modem Switching (Laptop, Notebook, Pocket Size)
Hookswitch
Dial Pulsing
Ground Start
Ringer Injection
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (Watt-Hour, Water, Gas)
Medical Equipment-Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
UL Recognized: File Number E76270
CSA Certified: File Number LR 43639-10
BSI Certified to:
BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
BS EN 41003:1993
Certificate #: 7344
Small 8 Pin DIP Package
Low Drive Power Requirements (TTL/CMOS
Compatible)
No Moving Parts
High Reliability
Arc-Free With No Snubbing Circuits
3750VRMS Input/Output Isolation
FCC Compatible
VDE Compatible
No EMI/RFI Generation
Machine Insertable, Wave Solderable
Surface Mount and Tape & Reel Versions Available
Applications
Features
Description
Approvals
Multifunction Telecom Switch
Ordering Information
Part # Description
XS170 8 Pin DIP (50/Tube)
XS170S 8 Pin Surface Mount (50/Tube)
XS170STR 8 Pin Surface Mount (1000/Reel)
XS170 Units
Load Voltage 350 V
Load Current 100 mA
Max RON 50
Pin Configuration
1
2
3
4
8
7
6
5
XS170 Pinout
+ LED - Relay
– LED - Relay
Collector - Phototransistor
Emitter - Phototransistor
Load - Relay (MOSFET Output)
Load - Relay (MOSFET Output)
LED - Phototransistor –/+
LED - Phototransistor +/–
www.clare.com
XS170
Rev. 1
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Flatpack/Surface Mount
Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Relay Portion (Pins 7, 8)
Output Characteristics @ 25°C
Load Voltage (Peak) - VL- - 350 V
Load Current (Continuous) - IL- - 100 mA
Peak Load Current 10ms ILPK - - 350 mA
On-Resistance IL=120mA RON -33 50
Off-State Leakage Current VL=350V ILEAK -- 1 µA
Switching Speeds
Turn-On IF=5mA, VL=10V TON -- 5ms
Turn-Off IF=5mA, VL=10V TOFF -- 5ms
Output Capacitance 50V; f=1MHz COUT -25 - pF
Load Current Limit ICL -- -mA
Relay Portion (Pins 1, 2)
Input Characteristics @ 25°C
Input Control Current IL=120mA IF2- 50mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR-- 5 V
Reverse Input Current VR=5V IR- - 10 µA
XS170
www.clare.com 3
Rev. 1
Electrical Characteristics (Continued)
Parameter Conditions Symbol Min Typ Max Units
Detector Portion (Pins 3, 4)
Output Characteristics @ 25°C
Phototransistor Blocking Voltage IC=10µA BVCEO 20 50 - V
Phototransistor Output Current VCE=5V, IF=0mA ICEO - 50 500 nA
Saturation Voltage IC=2mA, IF=16mA VSAT - 0.3 0.5 V
Current Transfer Ratio IF=6mA, VCE=0.5V CTR 33 100 - %
Detector Portion (Pins 5, 6)
Input Characteristics @ 25°C
Input Control Current IC=2mA, VCE=0.5V IF6 2 100 mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Input Current IC=1µA, VCE=5V IF525 -µA
(Detector must be off)
Input to Output Capacitance
(Relay Only) - CI/O -3 -pF
Capacitance Input to Output - - - 3 - pF
Input to Output Isolation - VI/O 3750 - - VRMS
www.clare.com
4
XS170
Rev. 1
PERFORMANCE DATA*
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
XS170
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
XS170
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
25
20
15
10
5
029.09 30.63 32.16 33.7029.86 31.40 32.93
On-Resistance ()
Device Count (N)
XS170
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
25
20
15
10
5
0424.0 434.5 444.9 455.4429.3 439.7 450.1
Blocking Voltage (V)
Device Count (N)
XS170
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
0.50 0.62 0.750.44 0.56 0.69 0.81
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
XS170
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC
25
20
15
10
5
00.50 0.62 0.750.44 0.56 0.69 0.81
LED Current (mA)
Device Count (N)
)
XS170
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
0.67 0.83 0.99 1.140.75 0.91 1.06
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
XS170
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC)
0.11 0.17 0.22 0.280.250.190.14
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
XS170
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
10mA
2mA
5mA
XS170
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
Temperature (°C)
Leakage (µA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0-20 0 20 40 60 80 100
XS170
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
455
450
445
440
435
430
425
420 -20 0 20 40 60 80 100
XS170
Typical Turn-On vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
5mA
10mA
20mA
Turn-On (ms)
-40
1.80
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0-20 0 20 40 60 80 100 120
XS170
Typical Turn-Off vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0-20 0 20 40 60 80 100 120
XS170
www.clare.com 5
Rev. 1
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
XS170
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (°C)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8-40 -20 0 20 40 60 80 120100
50mA
30mA
20mA
10mA
5mA
XS170
Typical Turn-On vs. LED Forward Current
(Load Current = 100mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
050
XS170
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
050
XS170
Typical IF for Switch Operation
vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
LED Current (mA)
-40
6.0
5.0
4.0
3.0
2.0
1.0
0-20 0 20 40 60 80 100 120
XS170
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 100mADC)
Temperature (°C)
LED Current (mA)
-40
6.0
5.0
4.0
3.0
2.0
1.0
0-20 0 20 40 60 80 100 120
XS170
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Voltage (V)
Load Current (mA)
120
100
80
60
40
20
0
-20
-40
-60
-80
-100
-120 -3-4 -2 -1 0 1 2 3 4
XS170
Energy Rating Curve
Time
Load Current (A)
10µs
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
01ms100µs 100ms 1s
10ms 10s 100s
XS170
Typical Normalized CTR vs. Forward Current
(VCE = 0.5V)
IF (mA)
Normalized CTR (%)
02 4 6 8 10 12 14 16 18
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
020
XS170
Typical Collector Current vs. Forward Current
(VCE = 0.5V)
IF (mA)
IC (mA)
02468 1210 14 16 18 20
12
10
8
6
4
2
0
www.clare.com
6
XS170
Rev. 1
Dimensions
mm
(inches)
Mechanical Dimensions
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
7.620 ± .127
(.300 ± .005)
8-.800 DIA.
(8-.031 DIA.)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 TYP.
(.360)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
9.144 ± .508
(.360 ± .020)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005 )
8 Pin DIP Through Hole (Standard)
Tape and Reel Packaging for 8 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.300
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.300 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
PC Board Pattern
(Top View) 2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.498 ± .127
(.059 ± .005)
4.445 ± .127
(.175 ± .005) 3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.077 ± .127
(.318 ± .005)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
8 Pin DIP Surface Mount (S Suffix) 9.652 ± .381
(.380 ± .015)
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-XS170-R1.0
©Copyright 2002, Clare, Inc.
All rights reserved. Printed in USA.
6/25/02
For additional information please visit our website at: www.clare.com