238
ALUMINUM ELECTROLYTIC CAPACITORS
µ
(L < 20) 1.5
(L 20) 2.0
(mm)
φD
P
φd
10
5.0
0.6
5
2.0
0.5
12.5
5.0
16
7.5
0.6 0.8
18
7.5
0.8
6.3
2.5
0.5 0.6
8
3.5
In case L > 25 for the φ12.5 dia. unit, lead dia. φd = 0.8mm
φ D
5
Pb-free leadwire
Pb-free PET sleeve
DD
6.3 ED
8 · 10 PD
12.5 to 18 HD
Configuration
Pressure
relief vent
(φ6.3up)
UHW
UHV
Long Life
Lower impedance at high frequency range.
Smaller case size and high ripple current.
Compliant to the RoHS directive (2011/65/EU,(EU)2015/863).
Specifications
Radial Lead Type Type numbering system (Example : 16V 2200
µ
F)
Smaller
UHE
Frequency coefficient of rated ripple current
120Hz 1kHz 10kHz 10kHz or more
Cap. (µF) Frequency
8.2 to 33
39 to 180
220 to 560
680 to 1800
2200 to 3900
4700 to 15000
0.70
0.75
0.85
0.87
0.90
0.95
0.40
0.40
0.50
0.60
0.75
0.85
0.90
0.90
0.94
0.95
0.95
0.98
1.00
1.00
1.00
1.00
1.00
1.00
UHW
Miniature Sized, High Ripple Current,
High Reliability
Performance Characteristics
ltem
0.21 0.18 0.15 0.13 0.11 0.10 0.09 0.09 0.08
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan
δ
)
Stability at Low Temperature
Endurance
–40 to +105˚C
6.3 to 100V
8.2 to 15000µF
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV (µA)
Rated voltage (V)
Case size
φD <
= 6.3 8×11.5 8×15 , 8×20 φD >
= 10
tan
δ
(MAX.)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Z–25˚C / Z+20˚C
6.3V
6000 hours 8000 hours 9000 hours 10000 hours
8000 hours
7000 hours
10000 hours
9000 hours
11000 hours 12000 hours
10000 hours 10000 hours
63 to 100V
10 to 50V
Rated voltage
(V)
6.3 10 16 25 35 50 63 80 100
The following specifications shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is
applied at 105˚C , the peak voltage shall not exceed the rated voltage.
Marking Printed with white color letter on black sleeve.
Capacitance change Within ± 25% of the initial capacitance value(6.3V 10V:± 30%)
tan δ 200% or less than the initial specified value
Leakage current Less than or equal to the initial specified value
120Hz
20˚C
120Hz
2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3
6.3 10 16 25 35 50 63 80 100
5 5 4 4 4 4
Z–40˚C /
Z+20˚C
φD <
= 6.3
φ >
= 8
Rated voltage (V)
Impedance ratio
(MAX.)
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
• Please refer to page 20 about the end seal configuration.