HLG-150 150W Single Output Switching Power Supply series Features : *Universal AC input / Full range *Built-in active PFC function *High efficiency up to 94% *Protections: Short circuit / Over current / Over voltage / Over temperature *Cooling by free air convection *OCP point adjustable through output cable or internal potentiometer *IP67 / IP65 design for indoor or outdoor installations *Three in one dimming function (1~10Vdc or PWM signal or resistance) *Suitable for LED lighting and street lighting applications *Compliance to worldwide safety regulations for lighting *Suitable for dry / damp / wet locations *5 years warranty (Note.10) F HLG-150-12 A 110 M M SELV IP65 IP67 Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL DC VOLTAGE OUTPUT HLG-150-20 HLG-150-24 HLG-150-30 HLG-150-36 HLG-150-42 HLG-150-48 HLG-150-54 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V 12.5A 10A 7.5A 6.3A 5A 4.2A 3.6A 3.2A 2.8A RATED POWER 150W 150W 150W 151.2W 150W 151.2W 151.2W 153.6W 151.2W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V Can be adjusted by internal potentiometer A type only CURRENT ADJ. RANGE 6 ~ 10A 4.5 ~ 7.5A 3.8 ~ 6.3A 3 ~ 5A 2.5 ~ 4.2A 2.16 ~ 3.6A 1.92 ~ 3.2A 1.68 ~ 2.8A VOLTAGE TOLERANCE Note.3 2.5% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 7.5 ~ 12.5A Note.8 2500ms, 80ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE 16ms at full load Note.5 90 ~ 264VAC 230VAC / 115VAC ; B type 2500ms, 200ms at 95% load 230VAC / 115VAC 230VAC / 115VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 92% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.7A / 115VAC 0.75A / 230VAC COLD START 65A(twidth=425s measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT OVER CURRENT PROTECTION HLG-150-15 RATED CURRENT SETUP, RISE TIME INPUT HLG-150-12 12V SHORT CIRCUIT OVER VOLTAGE 93% 92.5% 93.5% 93.5% 93.5% Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 14 ~ 17V 18 ~ 21V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V 23 ~ 27V 54 ~ 63V 59 ~ 65V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70 (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing SAFETY STANDARDS Note.7 94% <0.75mA / 240VAC WORKING TEMP. VIBRATION 94% 95 ~ 108% OVER TEMPERATURE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 94% -40 ~ +80 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3 ISOLATION RESISTANCE EMC EMISSION OTHERS NOTE I/P-FG:2KVAC O/P-FG:0.5KVAC EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A DIMENSION 228*68*38.8mm (L*W*H) PACKING 1.15Kg; 12pcs/14.8Kg/0.8CUFT 1. 2. 3. 4. 5. 6. 7. 8. 9. 192.2K hrs min. MIL-HDBK-217F (25) All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. Please refer to "DRIVING METHODS OF LED MODULE". Derating may be needed under low input voltages. Please check the static characteristics for more details. A type only. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 10. Refer to warranty statement. HLG-150 150W Single Output Switching Power Supply Mechanical Specification Case No.994D series Unit:mm Blank:(HLG-150) 228 12 204 9.6 300 20 T case F G (Green /Yello w) AC /L( Brown) AC /N (Blu e) 102 300 20 SJTW 18AWG x3C SJTW 14AWG x2C 4.2 x4PL -V(Black) +V(Red) T case: Max. Case Tem perature. IP67 rated. Cable for I/O connection. A Type:(HLG-15 0-_A) 228 12 204 9.6 Vo A DJ. 300 20 T case F G (Green /Yello w) AC /L( Brown) AC /N (Blu e) Io A DJ. 102 300 20 SJTW 18AWG x3C SJTW 14AWG x2C 4.2 x4PL -V(Black) +V(Red) T case: Max. Case Tem perature. IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rub ber stopper on the case.) B Type:(HLG-150-_B) 228 12 204 9.6 300 20 SJTW 18AWG x2C 300 20 F G (Green /Yello w) AC /L( Brown) AC /N (Blu e) T case 102 SJTW 14AWG x2C SJTW 18AWG x3C DIM+(Blue) DIM-(White) -V(Black) +V(Red) 4.2 x4PL T case: Max. Case Tem perature. File Name:HLG-150-SPEC 2013-11-27 HLG-150 150W Single Output Switching Power Supply series D Type(option):(HLG-150-_D) 228 12 204 9.6 300 20 T case F G (Green /Yello w) AC /L( Brown) AC /N (Blu e) 102 300 20 SJTW 18AWG x3C -V(Black) +V(Red) SJTW 14AWG x2C 4.2 x4PL T case: Max. Case Tem perature. IP67 rat ed. Timer dimming f unction, contact MEAN WELL f or details. Block Diagram Fosc : 100KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. FG DETECTION CIRCUIT O.L.P. PFC CONTROL PWM CONTROL O.T.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 -40 40 -25 -10 0 15 30 50 AMBIENT TEMPERATURE () 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz File Name:HLG-150-SPEC 2013-11-27 HLG-150 150W Single Output Switching Power Supply series Power Factor Characteristic Constant Current Mode 1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 0 .9 0 0 .8 8 0 .8 6 0 .8 4 0 .8 2 0 .8 0 0 .7 8 230 Vac 115 Vac 50% 60% 70% 80% 90% 100% (150W) LOAD EFFICIENCY vs LOAD (48V Model) HLG-15 0 series possess sup erior working efficiency that up to 94% can be reached in field applications. 94 90 86 230Vac 82 115Vac 78 74 70 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constan t voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). In the constant current region, the highe st voltage at the output of the driver depen ds on the configuration of the end systems. 100 Should there be any compa tibility issues, plea se contact MEAN WELL. (A) Constant Voltage area (B) Constant Current area 50 50 100 Io (%) Typical LED power supply I-V curve File Name:HLG-150-SPEC 2013-11-27 HLG-150 150W Single Output Switching Power Supply series DIMMING OPERATION (for B-type only) F G (Green /Yello w) AC /L( Brown) AC /N (Blu e) DIM+(Blue) DIM-(White) HLG-150 -V(Black) +V(Red) Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT conn ect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) Single driver 10 K 20K 30K 40 K 50K 60K 70 K 80K 90 K 10 0K Resistance Multiple drivers value ( N=driver quantity for synchronized 10K /N 20K /N 30K/N 40K /N 50K /N 60K/N 70K /N 80K /N 90K /N 100K /N OPEN ----- dimming operation) Percentage of rated current 10% 20% 30 % 40 % 50 % 60% 70% 80% 90% 100% 95 %~108% 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40 % 50 % 60% 70 % 80% 90% 100% 95 %~108% 10V PWM signa l for outpu t current adjustment (Typical): Frequency ran ge :100Hz ~ 3KHz Duty value 10% 20% 30% 40 % 50 % 60% 70 % 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40 % 50 % 60% 70 % 80% 90% 100% 95 %~108% Using the built-in dimming function on B-type model can 't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the ligh ting fixture connecting to the LED power supply unit. Direct connecting to LEDs is sugge sted, but is not suitable for using additional drivers. Dimming conn ection diagram for turning the lighting fixture ON/OFF : N FG L Switch Relay Adjuster 0~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HLG-150 B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted throug h output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-150-SPEC 2013-11-27 HLG-150 150W Single Output Switching Power Supply series WATERPROOF CONNECTION Waterproof conn ector Waterproof connector can be assembled on the output cable of HLG-150 to ope rate in dry/wet/damp or outdoor environment. AC source HLG-150 I/P O/P Size Pin Configuration (Female) M12 Orde r No. S ui table Curre nt 4-PIN 5A/ PIN M12-0 4 10A max. 5-PIN 5A/ PIN M12 -05 10A max. Size Pin Configuration (Female) M15 2-PIN 12 A/PIN M15-0 2 12 A max. Orde r No. S ui tab le Cur rent LED Lamp Cable Joiner 66 26 CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-150 O/ P Wires CJ04 cab le joine r can be purchased indepen dently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box(Option ) 204 366 10 76 5 F G (Green /Yello w) AC /L( Brow n) AC /N(Blu e) -V(B lack) +V (Red) SJTW 14AWG x2C SJTW 18AWG x3C 2- 5 3- PF 1/2" 15020 Optional junction box available for A / Blank - type, please contact MEAW WELL for details. 3- PF 1/2" 15020 86 File Name:HLG-150-SPEC 2013-11-27