Feedthrough components
FN 756X
DC feedthrough capacitor
Approvals■ EN/IEC 60384-14 approval
■ Rated currents from 10 to 200A
■ 2.5kV pulse test capability
■ Class Y4 capacitor
Typical applications
Feedthrough capacitors offer a high insertion
loss across a broad band of frequencies from
a few tens of kHz up to the GHz region. The
construction of feedthrough capacitors cause
a better suppression performance over a much
wider frequency range than a conventional
two-wire capacitor of equivalent value.
Different versions are available offering a
wide selection on operating currents and per-
formance levels. DC feedthrough capa-
citors are designed and approved for
130VDC/130VAC 50/60Hz operation.
■ Very low internal series inductance.
■ Very high self-resonant frequency.
■ Self-healing dielectric.
■ High quality and reliability.
■ Through-bulkhead mounting.
■ Anti-twist protection.
■ Custom-specific or dual-versions on
request.
■ Power line filter for 48VDC battery power
■ Increasing system and information security
■ Telecom base stations
■ Switching and cellular equipment
■ Computer servers
■ UPS power supplies
■ Medical equipment
Features and benefits
Technical specifications
Maximum continuous operating voltage: 130VDC (UL, ENEC)
130VAC, 50/60Hz (UL, ENEC)
650VDC max.
Rated currents: 10 to 200A @ 60°C max.
Capacitor class: Y4
High potential test voltage: 1700VDC for 2 sec
Insulation resistance (100VDC after 60 sec): < 0.33μF, R > 1500MΩ
> 0.33μF, τ > 5000s
Temperature range (operation and storage): -40°C to +100°C (40/100/21)
Flammability corresponding to: UL 94V-2 or better
MTBF @ 60°C/130V (Mil-HB-217F): < 200A: > 1,400,000 hours
≥ 200A: > 450,000 hours
Typical electrical schematic
C
> Components > FN 756X
Feedthrough Rated current Leakage current* Capacitance** DC resistance*** Weight
@ 60°C @ 130VAC/50Hz C R @ 25°C
[A] [mA] [nF] [mΩ] [g]
Feedthrough selector table
FN 7560-10-M3 10 0.49 10 0.8 15
FN 7562-16-M4 16 4.9 100 0.62 34
FN 7563-16-M4 16 23 470 0.63 78
FN 7562-32-M4 32 4.9 100 0.62 34
FN 7563-32-M4 32 23 470 0.63 79
FN 7560-63-M6 63 0.49 10 0.3 70
FN 7561-63-M6 63 2.3 47 0.3 70
FN 7562-63-M6 63 4.9 100 0.3 70
FN 7563-63-M6 63 23 470 0.43 103
FN 7560-100-M8 100 2.3 47 0.23 145
FN 7561-100-M8 100 4.9 100 0.23 145
FN 7562-100-M8 100 23 470 0.23 145
FN 7563-100-M8 100 49 1000 0.25 192
FN 7560-200-M10 200 4.9 100 0.16 160
FN 7561-200-M10 200 23 470 0.16 160
FN 7562-200-M10 200 49 1000 0.18 268
FN 7563-200-M10 200 230 4700 0.14 490
* Tolerance +20%
** Tolerance ±20%
*** Tolerance +15%
50Ω system
Typical filter attenuation
10A types 16A types 32A types 63A types
100A types 200A types
> Components > FN 756X
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com September 2008
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
A B C D E L M N S T
Dimensions
FN 7560-10-M3 57 10 15 13 16 19 9.1 Ø10.3 M3 M10x1
FN 7562-16-M4 75 12 20 17 18 30 10.3 Ø12.3 M4 M12x1
FN 7563-16-M4 82 16 32 27 18 33 18.3 Ø20.3 M4 M20x1
FN 7562-32-M4 75 12 20 17 18 30 10.3 Ø12.3 M4 M12x1
FN 7563-32-M4 82 16 32 27 18 33 18.3 Ø20.3 M4 M20x1
FN 7560-63-M6 96 14 25 22 26 30 14.3 Ø16.3 M6 M16x1
FN 7561-63-M6 96 14 25 22 26 30 14.3 Ø16.3 M6 M16x1
FN 7562-63-M6 96 14 25 22 26 30 14.3 Ø16.3 M6 M16x1
FN 7563-63-M6 99 16 32 27 26 33 18.3 Ø20.3 M6 M20x1
FN 7560-100-M8 113 16 32 27 32 33 18.3 Ø20.3 M8 M20x1
FN 7561-100-M8 113 16 32 27 32 33 18.3 Ø20.3 M8 M20x1
FN 7562-100-M8 113 16 32 27 32 33 18.3 Ø20.3 M8 M20x1
FN 7563-100-M8 133 19 38 27 32 50 22.3 Ø24.3 M8 M24x1
FN 7560-200-M10 130 19 32 27 40 33 22.3 Ø24.3 M10 M24x1
FN 7561-200-M10 130 19 32 27 40 33 22.3 Ø24.3 M10 M24x1
FN 7562-200-M10 147 19 38 27 40 50 22.3 Ø24.3 M10 M24x1
FN 7563-200-M10 165 19 54 41 40 68 24.3 Ø27.3 M10 M27x1.5
Tolerances ±2 ±0.2
M3 M4 M6 M8 M10 M10x1 M12x1 M16x1 M20x1 M24x1 M27x1.5
Recommended torque
Terminal thread 0.5Nm 1.2Nm 2.5Nm 5Nm 8Nm
Mounting thread 2Nm 3Nm 4Nm 7Nm 8Nm 12Nm
Mechanical data
Panel cut out
N
M
L
D
A
BE
ST
C
