HD74BC640A Octal Bus Transceivers With 3 State Outputs REJ03D0290-0200Z (Previous ADE-205-026 (Z)) Rev.2.00 Jul.16.2004 Description The HD74BC640A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process. The device features low power dissipation that is about 1/5 of high speed bipolar logic IC. When the frequency is 10 MHz. The device has eight bus transceivers with three state outputs in a 20 pin package. Each device has an active low enable input (G) and a direction control input, DiR. When DiR is high, data flows from the A inputs to the B outputs. When DiR is high, data flows from the B inputs to the A outputs. When enable inputs (G) is high, disables both A and B ports by placing then in a high impedance. Features * Input/Output are at high impedance state when power supply is off. * Input pins can be open, when not used, owing to built in input pull up circuit. * Input is TTL level. * Wide operating temperature range Ta = -40 to +85C. * Ordering Information Part Name HD74BC640AFPEL Package Type Package Code SOP-20 pin (JEITA) FP-20DAV Package Abbreviation FP Taping Abbreviation (Quantity) EL (2,000 pcs/reel) Function Table Control Inputs G DIR Operation L L B data to A bus L H H X A data to B bus Isolation H : L : X : High level Low level Immaterial Rev.2.00, Jul.16.2004, page 1 of 7 HD74BC640A Pin Arrangement DiR 1 20 VCC A1 2 19 G A2 3 18 B1 A3 4 17 B2 A4 5 16 B3 A5 6 15 B4 A6 7 14 B5 A7 8 13 B6 A8 9 12 B7 GND 10 11 B8 (Top view) Absolute Maximum Ratings Item Symbol Rating Unit Supply voltage Input diode current VCC IIK -0.5 to +7.0 30 V mA Input voltage Output voltage VIN VOUT -0.5 to +7.5 -0.5 to +7.5 V V Off state output voltage VOUT(off) -0.5 to +5.5 V Storage temperature Tstg -65 to +150 C Note: 1. The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Symbol Min Typ Max Unit Supply voltage Input voltage VCC VIN 4.5 0 5.0 -- 5.5 VCC V V Ouput voltage Operating temperature VOUT Topr 0 -40 -- -- VCC 85 V C 8 ns/V Input rise/fall time*1 tr, tf 0 -- Note: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Rev.2.00, Jul.16.2004, page 2 of 7 HD74BC640A Logic Diagram DiR A1 G B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6 A7 B7 A8 B8 Electrical Characteristics (Ta = -40 to +85C) Item Symbol VCC (V) Input voltage VIH Min 2.0 Max -- Unit V Test Conditions Output voltage VIL VOH 4.5 -- 2.4 0.8 -- V V IOH = -3 mA VOL 4.5 4.5 2.0 -- -- 0.5 V V IOH = -15 mA IOL = 48 mA Input diode voltage VIK 4.5 4.5 -- -- 0.55 -1.2 V V IOL = 64 mA IIN = -18 mA Input current II 5.5 5.5 -- -- -250 100 A A VIN = 0 V An or Bn, VIN = 5.5 V 5.5 5.5 -- -- 1.0 100 A A DiR or G, VIN = 5.5 V DiR or G, VIN = 7 V Output short circuit current*1 Off state output current IOS IOZH 5.5 5.5 -100 -- -225 -100 mA A VO = 0 V, VIN = 0 or 5.5 V VO = 2.7 V Supply current IOZL ICCL 5.5 5.5 -- -- -250 29.5 A mA ICCH 5.5 -- 2.5 mA ICCZ 5.5 -- 4.5 mA VO = 0.5 V VIN = 0 or 5.5 V All outputs is "L" VIN = 0 or 5.5 V All outputs is "H" VIN = 0 or 5.5 V All outputs is "Z" ICCT*2 5.5 -- 1.5 mA VIN = 3.4 or 0.5 V Notes: 1. Not more than one output should be shorted at a time and duration of the short circuit should not exceed one second. 2. When input by the TTL level, it shows ICC increase at per one input pin. Rev.2.00, Jul.16.2004, page 3 of 7 HD74BC640A Switching Characteristics (CL = 50 pF) Ta = 25C VCC = 5.0 V Item Propagation delay time Ta = -40 to +85C VCC = 5.0 V 10% Symbol Min tPLH 3.0 Max 6.0 Min 3.0 Max 7.0 Unit Test Conditions ns An to Bn tPHL tPLH 3.0 3.0 6.0 6.0 3.0 3.0 7.0 7.0 ns Bn to An tPHL tZH 3.0 3.0 6.0 9.0 3.0 3.0 7.0 11.0 ns G to Bn tZL tZH 3.0 3.0 9.0 9.0 3.0 3.0 11.0 11.0 ns G to An tZL tHZ 3.0 3.0 9.0 8.0 3.0 3.0 11.0 10.0 ns G to Bn tLZ tHZ 3.0 3.0 8.0 8.0 3.0 3.0 10.0 10.0 ns G to An 3.0 8.0 3.0 (Typ) 3.0 -- 10.0 Input capacitance tLZ CIN Output capacitance CI/O 15.0 (Typ) -- Output enable time Output disable time Rev.2.00, Jul.16.2004, page 4 of 7 pF VIN = VCC or GND pF VI/O = VCC or GND HD74BC640A Test Circuit VCC VCC G Pulse Generator Zout = 50 Output See Function Table Input A1 S1 500 B1 CL = 50 pF 450 OPEN 7V *4 50 Scope DIR Notes: 1. 2. 3. 4. CL includes probe and jig capacitance. A2-B2 to A8-B8 are identical to above load circuit. S1: Input-Output change switch. Open: tPLH, tPHL, tZH tHZ 7 V: tZL, tLZ Waveforms-1 tf Input 90 % 1.5 V 10 % tr 90 % 1.5 V 10 % t PHL t PLH 3V 0V VOH Output Rev.2.00, Jul.16.2004, page 5 of 7 1.5 V 1.5 V VOL HD74BC640A Waveforms-2 tf G tr 90 % 1.5 V 10 % t ZL Waveform - A Notes: 0V 3.5 V 1.5 V VOL + 0.3 V t HZ t ZH Waveform - B 3V 90 % 1.5 V 10 % t LZ 1.5 V VOH - 0.3 V VOL VOH 0V 1. tr = 2.5 ns, tf = 2.5 ns 2. Input waveforms: PRR = 1 MHz, duty cycle 50% 3. Waveform-A shows input conditions such that the output is "L" level when enable by the output control. 4. Waveform-B shows input conditions such that the output is "H" level when enable by the output control. Rev.2.00, Jul.16.2004, page 6 of 7 HD74BC640A Package Dimensions As of January, 2003 Unit: mm 12.6 13 Max 11 1 10 1.27 *0.40 0.06 0.10 0.10 0.80 Max *0.20 0.05 2.20 Max 5.5 20 0.20 7.80 +- 0.30 1.15 0 - 8 0.70 0.20 0.15 0.12 M *Ni/Pd/Au plating Rev.2.00, Jul.16.2004, page 7 of 7 Package Code JEDEC JEITA Mass (reference value) FP-20DAV -- Conforms 0.31 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0