89
RFI Power Line Filters
1
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
WG Series
WG Series
High Performance, Low Cost Filter Ideal for Appliance Equipment
Maximum leakage current each Line to Ground:
A, B & C Models D, E & F Models
@ 120 VAC 60 Hz: .76 mA .10 mA
@250 VAC 50 Hz: 1.27 mA .20 mA
Hipot rating (one minute):
Line to Ground: 2250 VDC
Line to Line: 1450 VDC
Rated Voltage (max): 250 VAC
Operating Frequency: 50/60 Hz
Rated Current: 16A
Operating Ambient Temperature Range
(at rated current Ir): -10°C to +40°C
In an ambient temperature (T
a) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io= Ir(85-Ta)/45
• Cost-effective
• Tubular design
• WGA, WGB and WGC versions designed to
comply with leakage current for fixed appliances
not easily moved from one place to another
• WGD, WGE and WGF versions designed to comply
with leakage current requirements for appliances
which may be easily moved from one place to
another
• Available in a variety of styles
Ordering Information
16 WG A 1
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire Leads
7 – RAST 5 connection
Leakage Current & Performance
A, B & C: for fixed appliances
A = Standard
B = Enhanced
C = High performance
D, E & F: for mobile appliances
D = Standard
E = Enhanced
F = High performance
WG Series
Current Rating
16A
Specifications
UL Recognized
CSA Certified
VDE Approved
Electrical Schematics
N(4)
U (1)
GND
U (3)
L (2)
Available Part Numbers
16WGA1 16WGA3 16WGA7
16WGB1 16WGB3 16WGB7
16WGC1 16WGC3 16WGC7
16WGD1 16WGD3 16WGD7
16WGE1 16WGE3 16WGE7
16WGF1 16WGF3 16WGF7
N
GND
L
With RAST 5 Connector (style 7)
WG_1 Style
90
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
WG Series
High Performance, Low Cost Filter for Appliance Equipment (continued)
Case Styles
WG_1
.386
9.80
2.46
62.5
.46
11.7
1.49
37.8
max.
max.
Dia.
WG_3
1.49
37.8 Dia.
.386
9.80
2.0
50.8 max.
4.0
101.6 min.
WG_7
1.49
37.8 Dia.
.386
9.80
2.4
60.96
.352
8.94
max.
min.
WG_7 Style
91
RFI Power Line Filters
1
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
WG Series
High Performance, Low Cost Filter for Appliance Equipment (continued)
Minimum Insertion Loss
Common Mode / Asymmetrical (Line to Ground)
Measured in closed 50 Ohm system
Differential Mode / Symmetrical (Line to Line)
Performance Data
Typical Insertion Loss
16WGA 16WGB
Common Mode / Asymmetrical (L-G)
Differential Mode / Symmetrical (L-L)
Measured in closed 50 Ohm system
16WGC 16WGD
All Case Styles
16WGE 16WGF
db
100
90
80
70
60
50
40
30
20
10
00.01 0.1 1 10 30
Frequency in MHz
db
100
90
80
70
60
50
40
30
20
10
00.01 0.1 1 10 30
Frequency in MHz
db
100
90
80
70
60
50
40
30
20
10
00.01 0.1 1 10 30
Frequency in MHz
db
100
90
80
70
60
50
40
30
20
10
00.01 0.1 1 10 30
Frequency in MHz
db
100
90
80
70
60
50
40
30
20
10
00.01 0.1 1 10 30
Frequency in MHz
db
100
90
80
70
60
50
40
30
20
10
00.01 0.1 1 10 30
Frequency in MHz
