wiecon wiecon Pluggable PC board connectors with pin-strip headers PCB Pluggable connectors provide a simple 2-piece mateable connection between an external connector and the printed circuit board. System features easy-to-operate screw termination installation and maintenance friendly quick disconnect pole configurations from 2 to 24 poles clear, straigthforward connection mating in both horizontal and vertical orientations to the printed circuit board clamping body always with wire guard Variety of types spacings: (3.5/ 7/ 5 /10) mm 2 to 24 p o l e terminal strip headers with vertical or horizontal solder pins solder pin diameters available in: 0.8 mm, 1 mm and 1.3 mm others are on request Marking smudge-proof inkjet marking directly on the plug clear, easily legible marking custom marking possible, consult factory cost-effective marking directly on the plug Abbreviations for plastic materials: PA 66/6 = Polyamide 66/6 PC = Polycarbonate PBT = Polybutylenterephthalate 314 Material Insulating housings: use of high-quality polycarbonate for its excellent electrical, mechanical and chemical characteristics (see facts & DATA) Metal parts: made of special alloys and/or special surface platings minimum feed through resistance high corrosion resistance secure, consistent clamping function clamping body: nickel-plated brass clamping screw: steel, zinc-plated and dichromated plug contact of type 8142 and ST 29: tin-plated bronze plug contact of type 8543: nickel-plated brass wire guard: tin-plated bronze Pin-strip headers: Insulating part: made from high-quality Polyamide 66/6 glass-fibre reinforcement for dimensional stability Metal parts: contact pin: tin plated brass Note: The information regarding cross sectional areas and connection types pertains to connections without ferrules. The indicated rated current pertains to the maximum load of the PC board connector with a connected wire of the indicated rated cross section. The rated voltage is indicated as per DIN VDE 0110 part 1 (IEC 60 664-1) - insulation coordination for electrical material in low voltage application - and refers to the delivered state of the PC board connector. Before the PC board is fitted with connectors, an appropriate PC board must be selected and dimensioned accordingly (e. g. regarding tracking resistance of the printed circuit board, distances of the leads and solder joints). Furthermore, the ambient conditions under which the device is to be used (pollution degree) must be considered. The indicated rated voltages will be valid for the complete module only if the printed circuit board and its connectors are correctly and carefully matched to each other. Type Spacing Cross section Number of poles mm mm2 Page 316 Page 318 Page 320 8543 8142 ST 29 3.50/7.00 5.00/10.00 5.08 1 2.5 1.5 2 - 24 2 - 24 10 wiecon wiecon 315 wiecon wiecon PC board connectors pluggable, spacings: 3.50/7.00 mm PCB Spacing: 3.50 mm Spacing: 3.50 mm Rated cross section: 1.0 mm2 Rated current: 6A Connection range: 0.14 - 1.5 mm2 solid/ 0.14 - 1.0 mm2 fine stranded 160 V/2.5 kV/3 - Overvoltage category III 250 V/2.5 kV/2 - Overvoltage category II *690 V/2.5 kV/1 - Overvoltage category I M2 * max. 600 V for ungrounded networks or expected overvoltage 3 kV for L 2.0 mm and 2.5 kV for 2.0 mm > L 1.5 mm 5 Color: gray Color: black Solder pin O 0.8 mm Solder pin O 1.0 mm Bore hole O 1.0 mm Bore hole O 1.3 mm Type 8543 Terminal strip header plug-in 90 to wire entry Rated voltages: VDE 0110 (spacing: 3.5 mm) UL ratings CSA ratings Approvals Std. pack G T No. 22 - 16 AWG No. 22 - 16 AWG Poles Spacing: 3.50 mm iqw 300 V 300 V 10 A 10 A iqw Part no. Part no. Part no. unmarked marked Color: gray Part no. Color: black 100 100 50 7.0 10.5 14.0 3.5 7.0 10.5 2 3 4 25.602.5253.0 25.602.5353.0 25.602.5453.0 25.600.5253.0 25.600.5353.0 25.600.5453.0 Z5.531.0225.0 Z5.531.0325.0 Z5.531.0425.0 Z5.531.3225.0 Z5.531.3325.0 Z5.531.3425.0 50 50 50 17.5 21.0 24.5 14.0 17.5 21.0 5 6 7 25.602.5553.0 25.602.5653.0 25.602.5753.0 25.600.5553.0 25.600.5653.0 25.600.5753.0 Z5.531.0525.0 Z5.531.0625.0 Z5.531.0725.0 Z5.531.3525.0 Z5.531.3625.0 Z5.531.3725.0 50 50 50 28.0 31.5 35.0 24.5 28.0 31.5 8 9 10 25.602.5853.0 25.602.5953.0 25.602.6053.0 25.600.5853.0 25.600.5953.0 25.600.6053.0 Z5.531.0825.0 Z5.531.0925.0 Z5.531.1025.0 Z5.531.3825.0 Z5.531.3925.0 Z5.531.4025.0 50 50 50 38.5 42.0 45.5 35.0 38.5 42.0 11 12 13 25.602.6153.0 25.602.6253.0 25.602.6353.0 25.600.6153.0 25.600.6253.0 25.600.6353.0 Z5.531.1125.0 Z5.531.1225.0 Z5.531.1325.0 Z5.531.4125.0 Z5.531.4225.0 Z5.531.4325.0 50 50 50 49.0 52.5 56.0 45.5 49.0 52.5 14 15 16 25.602.6453.0 25.602.6553.0 25.602.6653.0 25.600.6453.0 25.600.6553.0 25.600.6653.0 Z5.531.1425.0 Z5.531.1525.0 Z5.531.1625.0 Z5.531.4425.0 Z5.531.4525.0 Z5.531.4625.0 17 to 24pole upon request Spacing: 7.00 mm upon request Rated voltages: (spacing: 7 mm): VDE 0110 400 V/6 kV/3 - Overvoltage category III 690 V/6 kV/2 - Overvoltage category II 1000 V/6 kV/1 - Overvoltage category I Material: PC board connectors Insulating housing: PC gray, UL 94-V-0 Clamping body with female contact: tin-plated brass Clamping screw: zinc-plated steel Wire protection: tin-plated bronze Terminal strip header Insulating part: PA 66/6, glass-fibre reinforced gray or black, UL 94-V-0 Contact pin: tin-plated brass 316 vertical mount wiecon Spacing: 3.50 mm Color: black Color: black Solder pin O 0.8 mm Solder pin O 1.0 mm Bore hole O 1.0 mm Bore hole O 1.3 mm Terminal strip header iqw Part no. wiecon horizontal mount Part no. Color: black Color: black Z5.532.0225.0 Z5.532.0325.0 Z5.532.0425.0 Z5.532.3225.0 Z5.532.3325.0 Z5.532.3425.0 Z5.532.0525.0 Z5.532.0625.0 Z5.532.0725.0 Z5.532.3525.0 Z5.532.3625.0 Z5.532.3725.0 Z5.532.0825.0 Z5.532.0925.0 Z5.532.1025.0 Z5.532.3825.0 Z5.532.3925.0 Z5.532.4025.0 Z5.532.1125.0 Z5.532.1225.0 Z5.532.1325.0 Z5.532.4125.0 Z5.532.4225.0 Z5.532.4325.0 Z5.532.1425.0 Z5.532.1525.0 Z5.532.1625.0 Z5.532.4425.0 Z5.532.4525.0 Z5.532.4625.0 317 wiecon wiecon PC board connectors pluggable, spacings: 5.00/10.00 mm PCB Spacing: 5.00 mm Spacing: 5.00 mm Rated cross section: 2.5 mm2 Rated current: 8A Connection range: 0.14 - 4.0 mm2 solid/ 0.14 - 2.5 mm2 fine stranded Spacing: 10.00 mm Spacing: 10.00 mm 200 V/4 kV/3 - Overvoltage category III 250 V/4 kV/2 - Overvoltage category II 1000 V/4 kV/1 - Overvoltage category I M 2.5 5 Rated voltages: VDE 0110 (spacing 5 mm) UL r a t i n g s CSA ratings Approvals Std. pack G Type 8142 Terminal strip header plug-in 90 to wire entry vertical mount No. 22 - 12 AWG No. 22 - 12 AWG T Poles Spacing: 5.00 mm Color: gray Color: black Solder pin O 1.0 mm Solder pin O 1.3 mm Bore hole O 1.3 mm Bore hole O 1.6 mm uiqwd 300 V 300 V 15 A 15 A uiqwd Part no. Part no. Part no. unmarked marked Color: gray Part no. Color: black 100 100 50 10 15 20 5 10 15 2 3 4 25.602.2253.0 25.602.2353.0 25.602.2453.0 25.600.2253.0 25.600.2353.0 25.600.2453.0 Z5.530.0225.0 Z5.530.0325.0 Z5.530.0425.0 Z5.530.3225.0 Z5.530.3325.0 Z5.530.3425.0 50 50 50 25 30 35 20 25 30 5 6 7 25.602.2553.0 25.602.2653.0 25.602.2753.0 25.600.2553.0 25.600.2653.0 25.600.2753.0 Z5.530.0525.0 Z5.530.0625.0 Z5.530.0725.0 Z5.530.3525.0 Z5.530.3625.0 Z5.530.3725.0 50 50 50 40 45 50 35 40 45 8 9 10 25.602.2853.0 25.602.2953.0 25.602.3053.0 25.600.2853.0 25.600.2953.0 25.600.3053.0 Z5.530.0825.0 Z5.530.0925.0 Z5.530.1025.0 Z5.530.3825.0 Z5.530.3925.0 Z5.530.4025.0 50 50 50 55 60 65 50 55 60 11 12 13 25.602.3153.0 25.602.3253.0 25.602.3353.0 25.600.3153.0 25.600.3253.0 25.600.3353.0 Z5.530.1125.0 Z5.530.1225.0 Z5.530.1325.0 Z5.530.4125.0 Z5.530.4225.0 Z5.530.4325.0 50 50 50 70 75 80 65 70 75 14 15 16 25.602.3453.0 25.602.3553.0 25.602.3653.0 25.600.3453.0 25.600.3553.0 25.600.3653.0 Z5.530.1425.0 Z5.530.1525.0 Z5.530.1625.0 Z5.530.4425.0 Z5.530.4525.0 Z5.530.4625.0 17 to 24pole upon request Spacing: 10.00 mm unmarked marked 50 50 50 20 30 40 10 20 30 2 3 4 25.603.1253.0 25.603.1353.0 25.603.1453.0 25.601.1253.0 25.601.1353.0 25.601.1453.0 Z5.530.6225.0 Z5.530.6325.0 Z5.530.6425.0 Z5.530.8225.0 Z5.530.8325.0 Z5.530.8425.0 50 50 50 50 60 70 40 50 60 5 6 7 25.603.1553.0 25.603.1653.0 25.603.1753.0 25.601.1553.0 25.601.1653.0 25.601.1753.0 Z5.530.6525.0 Z5.530.6625.0 Z5.530.6725.0 Z5.530.8525.0 Z5.530.8625.0 Z5.530.8725.0 8 80 70 9 to 12pole upon request 25.603.1853.0 25.601.1853.0 Z5.530.6825.0 Z5.530.8825.0 50 Rated voltages: (spacing: 10.00 mm): VDE 0110 500 V/8 kV/3 - Overvoltage category III 800 V/8 kV/2 - Overvoltage category II 1000 V/8 kV/1 - Overvoltage category I Material: PC board connectors Insulating housing: PC gray, UL 94-V-0 Clamping body: nickel-plated brass Clamping screws: zinc-plated steel Contact spring: tin-plated bronze Terminal strip header Insulating part: PA 66/6, glass-fibre reinforced gray or black, UL 94-V-0 Contact pin: tin-plated brass 318 wiecon Accessories vertical mount Spacing: 5.00 mm horizontal mount Spacing: 10.00 mm Bore hole plan for fixing brackets vertical mount Bore hole plan for fixing brackets horizontal mount Color: black Color: black Solder pin O 1.0 mm Solder pin O 1.3 mm Bore hole O 1.3 mm Bore hole O 1.6 mm Terminal strip header uiqwd Part no. Part no. Color: black Color: black Z5.540.0225.0 Z5.540.0325.0 Z5.540.0425.0 Z5.540.3225.0 Z5.540.3325.0 Z5.540.3425.0 Z5.540.0525.0 Z5.540.0625.0 Z5.540.0725.0 Z5.540.3525.0 Z5.540.3625.0 Z5.540.3725.0 Z5.540.0825.0 Z5.540.0925.0 Z5.540.1025.0 Z5.540.3825.0 Z5.540.3925.0 Z5.540.4025.0 Z5.540.1125.0 Z5.540.1225.0 Z5.540.1325.0 Z5.540.4125.0 Z5.540.4225.0 Z5.540.4325.0 Z5.540.1425.0 Z5.540.1525.0 Z5.540.1625.0 Z5.540.4425.0 Z5.540.4525.0 Z5.540.4625.0 Z5.540.6225.0 Z5.540.6325.0 Z5.540.6425.0 Z5.540.8225.0 Z5.540.8325.0 Z5.540.8425.0 Z5.540.6525.0 Z5.540.6625.0 Z5.540.6725.0 Z5.540.8525.0 Z5.540.8625.0 Z5.540.8725.0 Z5.540.6825.0 Z5.540.8825.0 Part no. Std. pack Part no. wiecon horizontal mount Std. pack Fixing brackets: Insulating material PA 66/6 gray, Screw M 3, zinc-plated steel Coding piece strip Color: white Color: white Z5.523.7653.0 100 05.561.9453.0 05.561.9453.5 25 25 Coding piece strip Color: white Color: orange Z5.523.7653.0 100 05.561.9453.0 05.561.9453.5 25 25 Cover/marking strip 12 poles 319 wiecon wiecon PC board connectors, pluggable, spacing: 5.08 mm PCB codable 1,5 mm2 Rated cross section: 1.5 mm2 Rated current: 10 A Connection range: 0.14 - 2.5 mm2 solid/ 0.14 - 1.5 mm2 fine stranded 200 V/4 kV/3 - Overvoltage category III 250 V/4 kV/2 - Overvoltage category II 1000 V/4 kV/1 - Overvoltage category I M3 7 Solder pin O 1.3 mm Bore hole O 1.6 mm Statement of Conformity/CH Terminal strip header TOP connector, 10pole Type ST 29/10 BC plug-in 90 to wire entry 1.5 mm2 No. 22 - 14 AWG No. 22 - 14 AWG Rated voltages: VDE 0110 EN 60 998-1, EN 60 998-2-1 UL r a t i n g s CSA ratings Approvals Poles iqw Type Part no. ST 29/10 BC 93.101.2053.0 vertical mount 250 V 300 V 300 V Std. pack 10 A 5A 5A 250 V (if all terminals carry current) 300 V iqw Type Part no. Std. pack Spacing: 5.08 mm 10 Material: PC board connectors Insulating housing: PA 66/6 gray, UL 94-V-2 Clamping body: nickel-plated brass Clamping screws: zinc-plated steel Contact spring: tin-plated bronze Terminal strip header Insulating part: PBT, glass-fibre reinforced gray, UL 94-V-0 Contact pin: tin-plated brass 320 50 Z5.599.9025.0 50 10 A 10 A 5A wiecon Type Part no. 9705 A 9705 AB 05.599.8053.0 04.242.0850.0 04.842.0850.0 Std. pack Accessories Coding pieces, 10 codings each per strip Marking tag, unmarked marked Coding plan L = PC board connector S = terminal strip header Combination 01 Combination 02 Combination 03 Combination 04 Combination 05 Combination 06 Combination 07 Combination 08 Combination 09 Combination 10 Combination 11 Combination 12 Combination 13 Combination 14 S S S S S S S L L L L L L L L L L L L L S S S S S S S L L L L L L S L L L L L L S S L L L L S L L L L L L S L L L L L S L L L L L L S L L L L L S L L L L L L S L L L L L S L L L L L L S L L L L L S L L L L L L S L L L L L S 100 500 500 wiecon Accessories Pluggable terminal strip header with TOP connection A special version of the TOP system is the 5.08 mm spaced terminal strip header which can be soldered into a PC board. Two mounting holes are available in order to fix the terminal strip header. - Strain relief - Locking device - Marking capabilities By means of dove-tail guides, several terminal strip headers can be snapped together, while only the outer headers of this group must be mechanically fixed on the printed circuit board. In order to guarantee the necessary stability on the printed circuit board, it is not recommended to exceed four terminal strip headers in a group. The terminal TOP connector and terminal strip header each possess eight slots for coding to prevent mismating the TOP plug-in system. etc. 321