4 3 n3.25 - 0.10 0.00 (x4) + n3.25 - 0.10 0.00 (x4) + D 13.49 0.05 n28.00 0.05 33.73 25.00 0.05 26.97 0.05 Dust Caps 13.49 0.05 D 13.49 0.05 n28.00 0.05 26.97 0.05 26.97 0.05 Bayonet Channel x 3 Panel Flange C Recommended Double-D Panel Cutout Recommanded Round Panel Cutout C Receptacle Housing Bayonet Locking Type Die-Cast Version 29.7 17-300450 17-300460 5 Directive 2002/95/EC RoHS Compliant 4 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION 17-300440 Multi Mode (MM) APC Single Mode (APC SM) 6 b Part Number Single Mode (SM) B 19.5 33.3 - Operating Temperature: -40~C to +85~C 2. Connector can be front or rear mounted to a maximum panel thickness of 3.2mm. 3. IP67 rated when covered or fully mated with the appropriate mating connector Description 26.97 33.3 Notes: 1. Material and Finish: - Receptacle Housing: Die-Cast, Nickel Plated Duplex LC Adaptor Assembly: - Housing: Mod. PPO , UL94 V-0, Color: SM Blue/MM Beige/APC SM Green - Alignment Sleeves: SM Ceramic/MM Phosphor Bronze - Dust Cap: PP, Color: Neutral transparent A 26.97 1.8 DOT NOT ALTER CAD DRAWING BY HAND B 1 13.49 0.05 Fiber Optic Duplex LC Adaptor Assembly (Supllied with dust caps) 2 26.97 0.05 5 12.50 0.05 6 The panel gasket (P/N: 17-103540) and the M3 mounting hardware (P/N: 17-103530) must be ordered seperately, the recommended mounting torque is 12 to 14 lb-inch Customer: Name Tolerance Scale: Unless otherwise specified Title Approval Date 0 PLC 1 PLC 2 PLC 3 PLC ANGLES 0.30 0.20 0.10 0.05 Autodesk Inventor 1~ Material: See Notes Title: 2011 Date Name Draw. Nov. 09 Vincent Ke Appd. Nov. 09 J. Chaudry D-old 1 x b Apr/23/2012 Vincent ke original Rev. 3 Changes Date IP67 Industrial Duplex LC Receptacle (with Flange) Assembly Kit A Nickel Plated Zinc Die-Cast Version Norm b a Dim. in mm R DIN Drawing No.: 17K1A304 A3 Part No.: SEE PART NUMBER TABLE Name 2 1 Sheet 1/1