BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 MKP RADIAL POTTED TYPE PITCH 5/10 mm handbook, full pagewidth CBA141 Fig.1 Simplified outlines. FEATURES * 5 and 10 mm lead pitch * Supplied loose in box, in ammopack and taped on reel. APPLICATIONS * Low losses due to low contact resistance and low loss dielectric result in applications where high frequency occur or high stability is preferred * Their small dimensions make them suitable for circuits with high packaging density. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E24 series) 0.0015 to 0.27 F Capacitance tolerance 2%; 5% Rated (DC) voltage 63 V; 160 V; 250 V; 400 V; 630 V Rated (AC) voltage 25 V; 63 V;100 V; 125 V; 160 V Rated peak-to-peak voltage 70 V; 180 V; 280 V; 350 V; 450 V Climatic category 55/085/56 Rated temperature (DC) 85 C Rated temperature (AC) 85 C Maximum application temperature 85 C Reference specification IEC 60384-16 Performance grade grade 1 (long life) Stability grade grade 1 DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-16/101". 1999 Apr 29 VALUE 612 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 COMPOSITION OF CATALOGUE NUMBER TYPE AND VOLTAGES 416 63 V MULTIPLIER (nF) 417 160 V 0.01 2 418 250 V 0.1 3 419 400 V 1 4 420 630 V CAPACITANCE (numerically) Example: 1004 = 100 x 1 = 100 nF 2222 PACKAGING Ammopack Loose in box 1999 Apr 29 XXX X XXX X LEAD CONFIGURATION H = 18.5 mm lead length 4.0 +1.0/-0.5 mm 613 C-TOL 5% 0 2% 1 5% 3 2% 4 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 MKP 416 GENERAL DATA PITCH 5/10 mm b l handbook, full pagewidth h lt dt P CBA112 Fig.3 Outline. Specific reference data for the 63 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz C 0.11 F 5 x 10-4 25 x 10-4 0.11 F < C 0.18 F 10 x 10-4 30 x 10-4 0.18 F < C 0.27 F 10 x 10-4 35 x 10-4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 63 V (DC): P = 5 mm 50 V/s P = 10 mm 20 V/s R between leads at 50 V; 1 minute >100000 M R between interconnected leads and case at 50 V; 1 minute >100000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 100 V; 1 minute 2840 V; 1 minute Available 63 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 416 0.... on request 2% 2222 416 1.... preferred 5% 2222 416 3.... on request 2% 2222 416 4.... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 614 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 URdc = 63 V; URac = 25 V/Up-p = 70 V CATALOGUE NUMBER(2) C(1) (E24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.036 0.039 0.043 2222 416 13603 4.5 x 9.0 x 7.2 2222 416 13903 0.45 2222 416 14303 0.047 2222 416 14703 0.051 2222 416 15103 0.056 2222 416 15603 0.062 2222 416 16203 0.068 2222 416 16803 0.075 2222 416 17503 0.082 6.0 x 11.0 x 7.2 0.60 2222 416 18203 0.091 2222 416 19103 0.1 2222 416 11004 0.11 2222 416 11104 0.12 2222 416 11204 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.13 0.15 5.0 x 11.0 x 12.5 2222 416 11304 0.85 2222 416 11504 0.16 2222 416 11604 0.18 2222 416 11804 0.20 2222 416 12004 0.22 6.0 x 12.0 x 12.5 1.10 2222 416 12204 0.24 2222 416 12404 0.27 2222 416 12704 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 615 BC Components Product specification Metallized polypropylene filter capacitors MKP 417 MKP 417 GENERAL DATA PITCH 5/10 mm b l ndbook, full pagewidth h lt dt P CBA112 Fig.4 Outline. Specific reference data for the 160 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.18 F 0.18 F < C 0.24 F Rated voltage pulse slope (dU/dt)R at 160 V (DC): P = 5 mm P = 10 mm R between leads at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 10 x 10-4 10 x 10-4 15 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4 50 V/s 20 V/s >100000 M >100000 M 260 V; 1 minute 2840 V; 1 minute Available 160 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol 5% 2% 5% 2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 417 0.... 2222 417 1.... 2222 417 3.... 2222 417 4.... ORDERING on request preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 616 BC Components Product specification Metallized polypropylene filter capacitors MKP 417 URdc = 160 V; URac = 63 V/Up-p = 180 V CATALOGUE NUMBER(2) C(1) (E24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.024 0.027 0.03 2222 417 12403 4.5 x 9.0 x 7.2 2222 417 12703 0.45 2222 417 13003 0.033 2222 417 13303 0.036 2222 417 13603 0.039 2222 417 13903 0.043 2222 417 14303 0.047 0.051 6.0 x 11.0 x 7.2 2222 417 14703 0.60 2222 417 15103 0.056 2222 417 15603 0.062 2222 417 16203 0.068 2222 417 16803 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.075 0.082 0.091 2222 417 17503 4.0 x 10.0 x 12.5 2222 417 18203 0.60 2222 417 19103 0.1 2222 417 11004 0.11 2222 417 11104 0.12 0.13 5.0 x 11.0 x 12.5 2222 417 11204 0.85 2222 417 11304 0.15 2222 417 11504 0.16 2222 417 11604 0.18 2222 417 11804 0.20 6.0 x 12.0 x 12.5 2222 417 12004 1.10 0.22 2222 417 12204 0.24 2222 417 12404 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 617 BC Components Product specification Metallized polypropylene filter capacitors MKP 418 MKP 418 GENERAL DATA PITCH 5/10 mm b l handbook, full pagewidth h lt dt P CBA112 Fig.5 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.027 F 0.027 F < C 0.075 F 0.075 F < C 0.11 F 0.11 F < C 0.13 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 5 mm P = 10 mm R between leads at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 5 x 10-4 5 x 10-4 5 x 10-4 10 x 10-4 15 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 50 V/s 20 V/s >100000 M >100000 M 400 V; 1 minute 2840 V; 1 minute Available 250 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2% 5% 2% 2222 418 0..... 2222 418 1..... 2222 418 3..... 2222 418 4..... on request preferred on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 618 BC Components Product specification Metallized polypropylene filter capacitors MKP 418 URdc = 250 V; URac = 100 V/Up-p = 280 V CATALOGUE NUMBER(2) C(1) (E24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 2222 418 11003 0.01 0.011 0.012 2222 418 11103 3.5 x 8.0 x 7.2 2222 418 11203 0.35 0.013 2222 418 11303 0.015 2222 418 11503 0.016 2222 418 11603 0.018 2222 418 11803 0.02 4.5 x 9.0 x 7.2 0.45 2222 418 12003 0.022 2222 418 12203 0.024 2222 418 12403 0.027 2222 418 12703 0.03 2222 418 13003 0.033 0.036 6.0 x 11.0 x 7.2 2222 418 13303 0.60 2222 418 13603 0.039 2222 418 13903 0.043 2222 418 14303 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.047 2222 418 14703 0.051 0.056 2222 418 15103 4.0 x 10.0 x 12.5 0.60 2222 418 15603 0.062 2222 418 16203 0.068 2222 418 16803 0.075 2222 418 17503 0.082 5.0 x 11.0 x 12.5 0.85 2222 418 18203 0.091 2222 418 19103 0.1 2222 418 11004 0.11 0.12 6.0 x 12.0 x 12.5 2222 418 11104 1.10 2222 418 11204 0.13 2222 418 11304 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 619 BC Components Product specification Metallized polypropylene filter capacitors MKP 419 MKP 419 GENERAL DATA PITCH 5 mm b l handbook, full pagewidth h lt dt P CBA112 Fig.6 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz C 0.0091 F 5 x 10-4 10 x 10-4 0.0091 F < C 0.02 F 5 x 10-4 15 x 10-4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 400 V (DC) 50 V/s R between leads at 100 V; 1 minute >100000 M R between interconnected leads and case at 100 V; 1 minute >100000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 419 0..... on request 2% 2222 419 1..... preferred 5% 2222 419 3..... on request 2% 2222 419 4..... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 620 BC Components Product specification Metallized polypropylene filter capacitors MKP 419 URdc = 400 V; URac = 125 V/Up-p = 350 V CATALOGUE NUMBER(2) C(1) (E 24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 2222 419 11502 0.0015 0.0016 2222 419 11602 0.0018 2222 419 11802 0.002 2222 419 12002 0.0022 0.0024 2222 419 12202 3.5 x 8.0 x 7.2 2222 419 12402 0.35 0.0027 2222 419 12702 0.003 2222 419 13002 0.0033 2222 419 13302 0.0036 2222 419 13602 0.0039 2222 419 13902 0.0043 2222 419 14302 0.0047 2222 419 14702 0.0051 2222 419 15102 0.0056 2222 419 15602 0.0062 2222 419 16202 0.0068 0.0075 4.5 x 9.0 x 7.2 2222 419 16802 0.45 2222 419 17502 0.0082 2222 419 18202 0.0091 2222 419 19102 0.01 2222 419 11003 0.011 2222 419 11103 0.012 2222 419 11203 0.013 2222 419 11303 0.015 2222 419 11503 0.016 6.0 x 11.0 x 7.2 0.60 2222 419 11603 0.018 2222 419 11803 0.02 2222 419 12003 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 621 BC Components Product specification Metallized polypropylene filter capacitors MKP 419 MKP 419 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth h lt dt P CBA112 Fig.7 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz C 0.027 F 5 x 10-4 15 x 10-4 0.027 F < C 0.068 F 5 x 10-4 20 x 10-4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 400 V (DC) 20 V/s R between leads at 100 V; 1 minute >100000 M R between interconnected leads and case at 100 V; 1 minute >100000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 640 V; 1 minute 2840 V; 1 minute Available 400 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 419 0..... on request 2% 2222 419 1..... preferred 5% 2222 419 3..... on request 2% 2222 419 4..... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 622 BC Components Product specification Metallized polypropylene filter capacitors MKP 419 URdc = 400 V; URac = 125 V/Up-p = 350 V CATALOGUE NUMBER(2) C(1) (E24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 2222 419 12203 0.022 0.024 0.027 2222 419 12403 4.0 x 10.0 x 12.5 2222 419 12703 0.60 0.03 2222 419 13003 0.033 2222 419 13303 0.036 2222 419 13603 0.039 5.0 x 11.0 x 12.5 0.85 2222 419 13903 0.043 2222 419 14303 0.047 2222 419 14703 0.051 2222 419 15103 0.056 6.0 x 12.0 x 12.5 1.10 2222 419 15603 0.062 2222 419 16203 0.068 2222 419 16803 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 623 BC Components Product specification Metallized polypropylene filter capacitors MKP 420 MKP 420 GENERAL DATA PITCH 5 mm b l handbook, full pagewidth h lt dt P CBA112 Fig.8 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz 5 x 10-4 10 x 10-4 Tangent of loss angle: C 0.0068 F Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/s R between leads at 500 V; 1 minute >100000 M R between interconnected leads and case at 500 V; 1 minute >100000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 420 0..... on request 2% 2222 420 1..... preferred 5% 2222 420 3..... on request 2% 2222 420 4..... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 624 BC Components Product specification Metallized polypropylene filter capacitors MKP 420 URdc = 630 V; URac = 160 V/Up-p = 450 V CATALOGUE NUMBER(2) C(1) (E24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 2222 420 11502 0.0015 0.0016 2222 420 11602 0.0018 2222 420 11802 0.002 3.5 x 8.0 x 7.2 2222 420 12002 0.35 0.0022 2222 420 12202 0.0024 2222 420 12402 0.0027 2222 420 12702 0.003 2222 420 13002 0.0033 0.0036 4.5 x 9.0 x 7.2 2222 420 13302 0.45 2222 420 13602 0.0039 2222 420 13902 0.0043 2222 420 14302 0.0047 2222 420 14702 0.0051 0.0056 6.0 x 11.0 x 7.2 2222 420 15102 0.60 2222 420 15602 0.0062 2222 420 16202 0.0068 2222 420 16802 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 625 BC Components Product specification Metallized polypropylene filter capacitors MKP 420 MKP 420 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth h lt dt P CBA112 Fig.9 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz C 0.027 F 5 x 10-4 15 x 10-4 0.027 F < C 0.047 F 5 x 10-4 20 x 10-4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/s R between leads at 500 V; 1 minute >100000 M R between interconnected leads and case at 500 V; 1 minute >100000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS Ammopack H = 18.5 mm; note 2 Loose in box lt = 4.0 +1.0/-0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 2222 420 0..... on request 2% 2222 420 1..... preferred 5% 2222 420 3..... on request 2% 2222 420 4..... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 626 BC Components Product specification Metallized polypropylene filter capacitors MKP 420 URdc = 630 V; URac = 160 V/Up-p = 450 V CATALOGUE NUMBER(2) C(1) (E24) (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm C-tol = 2% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 2222 420 11003 0.01 0.011 2222 420 11103 0.012 2222 420 11203 0.013 4.0 x 10.0 x 12.5 0.60 2222 420 11303 0.015 2222 420 11503 0.016 2222 420 11603 0.018 2222 420 11803 0.02 0.022 5.0 x 11.0 x 12.5 2222 420 12003 0.85 2222 420 12203 0.024 2222 420 12403 0.027 2222 420 12703 0.03 2222 420 13003 0.033 2222 420 13303 0.036 6.0 x 12.0 x 12.5 2222 420 13603 1.10 0.039 2222 420 13903 0.043 2222 420 14303 0.047 2222 420 14703 Notes 1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a tolerance of 2%). The specifications of these intermediate values are usually equal to the specifications of the next higher value of the E24 series. 2. The shading indicates preferred types. 1999 Apr 29 627 BC Components Product specification Metallized polypropylene filter capacitors CONSTRUCTION MKP 416 to 420 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK Description * Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant case In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. * Radial leads, solder-coated The capacitors shall be mechanically fixed by the leads. * Solder-plated copper-clad steel wire to ensure good resistance to soldering heat SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. The maximum length and width of film capacitors is shown in Fig.11: * Eccentricity as in Fig.11. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. * Product height with seating plane as given by "IEC 60717" as reference: hmax h + 0.3 mm. MKP metallized polypropylene film handbook, halfpage handbook, halfpage bmax = b + 0.3 mm eccentricity lmax = l + 0.3 mm CBA116 metal spray layer Fig.11 Lay-out. connecting wire CBA333 Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. Fig.10 Construction. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Mounting NORMAL USE The capacitors are designed for printed-circuit board applications. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 Unless otherwise specified, all electrical values apply at an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 628 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 CHARACTERISTICS Capacitance CBA901 2 handbook, full pagewidth C C (%) 1 0 max. -1 typical -2 min. -3 -40 0 40 80 Tamb (C) Fig.12 Capacitance change at 1 kHz as a function of temperature. Impedance CBA485 102 handbook, full pagewidth Impedance () 10 1 10-1 10 nF 100 nF 10-2 10-3 104 105 106 107 Fig.13 Impedance as a function of frequency; typical curves. 1999 Apr 29 629 f (Hz) 108 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Maximum RMS voltage (sinewave) as a function of frequency CBA593 102 handbook, full pagewidth AC voltage (V) 10 47 nF 100 nF 220 nF 1 103 104 105 106 107 f (Hz) Fig.14 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 63 V. CBA594 102 handbook, full pagewidth AC voltage (V) 10 24 nF 47 nF 100 nF 220 nF 1 103 104 105 106 f (Hz) Fig.15 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 160 V. 1999 Apr 29 630 107 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 CBA595 103 handbook, full pagewidth AC voltage (V) 102 10 22 nF 47 nF 100 nF 1 103 104 105 106 107 f (Hz) Fig.16 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA596 103 handbook, full pagewidth AC voltage (V) 102 2.2 nF 4.7 nF 10 10 nF 22 nF 47 nF 1 103 104 105 106 f (Hz) Fig.17 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. 1999 Apr 29 631 107 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 CBA597 103 handbook, full pagewidth AC voltage (V) 102 10 47 nF 22 nF 10 nF 1 103 104 105 106 f (Hz) Fig.18 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 14 to 18. 1999 Apr 29 632 107 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Tangent of loss angle CBA506 10 handbook, full pagewidth dissipation factor (x 10-4) 1 0.1 103 104 105 f (Hz) 106 Fig.19 Tangent of loss angle as a function of frequency; typical curve. Insulation resistance CBA204 106 handbook, full pagewidth RC (s) 105 104 0 20 40 60 80 Fig.20 RC product as a function of ambient temperature; typical curve. 1999 Apr 29 633 Tamb (C) 100 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBA850 12 handbook, full pagewidth T (C) 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.21 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity bmax (mm) PITCH (mm) 5 10 15 3.5 3.0 - - 4.0 - 6.5 - 4.5 4.0 - - 5.0 - 7.5 10 6.0 5.5 9.0 11 7.0 - - 12 8.5 - - 16 10.0 - - 18 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 1999 Apr 29 634 BC Components Product specification Metallized polypropylene filter capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.22. handbook, halfpage thermocouple CBA758 Fig.22 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 1999 Apr 29 635 MKP 416 to 420 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated by safety standards and therefore electromagnetic interference suppression capacitors conforming to the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x -------- x dt < U Rdc x -------- dt dt rated 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.21. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 "Heat conductivity". 6. When using these capacitors in the input filters or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains or line card supply included). VOLTAGE CONDITIONS FOR 6 ABOVE T amb 85 C ALLOWED VOLTAGES Maximum continuous RMS voltage URac Maximum temporary RMS -overvoltage (<24 hours) 1.25 x URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc Example C = 0.1 F - 250 V used for the sine voltage signal of 2 VRMS at 1 MHz superimposed on 160 V (DC). The ambient temperature is 50 C. The circuit is high ohmic during a capacitor breakdown. Checking the conditions: 1. The peak voltage Up = 162.8 V is lower than 250 V (DC). 2. The peak-to-peak voltage 5.6 V is lower than 2 x 2 x 100 V (AC) = 280 U p - p . 3. The signal is not pulsed. 4. This is a sinewave, according the curves in, the capacitor can be applied. 5. Not applicable. 6. Not applicable. 1999 Apr 29 636 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 MARKING Product marking FRONT FACE CAPACITORS WITH PITCH = 5 mm handbook, halfpage The capacitors are marked by YAG laser on the side (see Fig.23) with the following information: 27n G 250V PH 9801 418 1. Capacitance code in accordance with "IEC 60062" : n = nF CBA686 2. Tolerance on rated capacitance: G = 2%; J = 5% 3. Rated (DC) voltage (e.g. 250 V) 4. Code for manufacturer Fig.23 Example of marking for a capacitor with pitch = 5 mm. 5. Year and week of manufacture (e.g. 9801) 6. Manufacturers type designation. CAPACITORS WITH PITCH = 10 mm The capacitors are marked by laser print on the front face (see Fig.24) with the following information: FRONT FACE handbook, halfpage 1. Year and week of manufacture (e.g. 9802) 9912 100n G 160V MKP 417 PH-HQ 2. Capacitance code in accordance with "IEC 60062" Tolerance on rated capacitance: G = 2%; J = 5% Rated (DC) voltage (e.g. 160 V) 3. Code for dielectric material (MKP) Manufacturer's type designation (e.g. 417) CBA687 4. Code for factory of origin (HQ) Fig.24 Example of marking for a capacitor with pitch = 10 mm. Code for manufacturer. 1999 Apr 29 637 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Package marking The package containing the capacitors is marked as shown in Fig.25. Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS Barcode label marking handbook, full pagewidth 1. 2. LINE MARKING EXPLANATION 3. 1 Manufacturer's name 4. 2 Country of origin 5. 3 Sub-family 4 Type description 5 Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1") 6 - 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) 6. 7. 8. 9. 10. CCB844 Fig.25 Barcode label. 1999 Apr 29 638 BC Components Product specification Metallized polypropylene filter capacitors MKP 416 to 420 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat "IEC 60068-2-20" Component solvent resistance Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" PROCEDURE (quick reference) load 10 N; 10 s no visible damage legible marking load 5 N; 4 x 90 solder bath: 260 C; 5 s C/C 1% + 5 pF tan 5 x 10-4 isopropyl alcohol; 23 C; 5 minutes 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms Climatic sequence Dry heat: 16 hours; 85 C "IEC 60068-2-2" Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: 2 hours; -55 C "IEC 60068-2-1" Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" REQUIREMENTS C/C 1% + 5 pF tan 5 x 10-4 C/C 1% + 5 pF tan 5 x 10-4 Rins 50% of specified value 56 days; 40 C; 90 to 95% RH C/C 1% + 5 pF tan 5 x 10-4 Endurance (DC): "IEC 60384-16" 2000 hours: 1.25 x URdc; 85 C Heat storage: "IEC 60384-16" 2000 hours; 85 C Resistance to soldering heat with preheating: "IEC 60384-16" Passive flammability: "IEC 60384-1" Endurance (AC): "IEC 60384-16" body temperature: 85 C; bath temperature: 260 C; dwell time: 10 s class C Rins 50% of specified value C/C 1% + 5 pF tan 5 x 10-4 1000 hours: 85 C 1.25 x URac (RMS); 50 Hz Rins 50% of specified value C/C 1% +5 pF tan 5 x 10-4 C/C 1% + 5 pF tan 5 x 10-4 no burning C/C 2% + 5 pF tan 5 x 10-4 Rins 50% of specified value Note 1. For detailed information, see "Type detail specification HQN-384-16/101". 1999 Apr 29 639