RTO-B Bauform SOT 227B (ISOTOP) / Size SOT 227B (ISOTOP) ISA-PLAN(R) - Prazisionswiderstande / Precision resistors Technische Daten / technical data Widerstandswerte Resistance values 1, 2, 5, 10, 15, 20, 33, 50, 68, 100, 150, 200, 330, 470 mOhm Toleranz Tolerance 0.5 %*, 1 %, 5 % Temperaturkoeffizient Temperature coefficient < 50 ppm/K (20 C - 60 C) Temperaturbereich Applicable temperature range -55 C bis/to +170 C Belastbarkeit Load capacity 40 W Kuhlkorpermontage/ with heatsink Innerer Warmewiderstand (Rthi) Internal heat resistance (Rthi) < 2.5 K/W Dielectric withstanding voltage 2500 VDC Betriebsspannung Operating voltage 500 V Induktivitat R 20 mOhm Inductance < 5 nH Isolationsspannung Stabilitat (Nennlast) Abweichung TK= Gehausebodentemperatur / Stability (nominal load) deviation TK= baseplate < 0.5 % nach/after 2000 h (TK = 40 C) < 1.0 % nach/after 2000 h (TK = 70 C) * Auf Anfrage / Upon request Merkmale / features * Sehr hohe Pulsbelastbarkeit 20 Joule fur 20 ms (R<20 mOhm) High pulse power rating 20 Joule for 20 ms (R<20 mOhm) * Dauerstrome bis 200 A (R= 1 mOhm) Constant current up to 200 A (R= 1 mOhm) * Vier-Leiter Messwiderstand Resistor with 4-terminal connection (Kelvin connection) Kompatibel zum ISOTOP-Standardgehause Compatible with ISOTOP-standard housing * 6HFKVNDQWPXWWHU0 KH[DJRQDOQXW0 40 W Dauerleistung bei 70 C 40 W permanent power at 70 C * Frequenzumrichter Frequency converters * Schaltnetzteile Switch mode power supplies ; 5 * Leistungsmodule Power modules * %HVFKULIWXQJPDUNLQJ 572%5: Snubber-Widerstand fur RC-Kombination Snubber-resistor for RC-combination * Applikationen / Applications Kontaktbelegung fur RTO-B / Pin designation for RTO-B Nr./No. 1 2 3 4 Kontakt/Contact I1 I2 U2 U1 Z-DH-051e Abmessungen [mm] / Dimensions [mm] Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue RTO-B-2013-05-16 1/4 ='+ RTO-B Bauform SOT 227B (ISOTOP) / Size SOT 227B (ISOTOP) TK, Lastminderung und Langzeitstabilitat / TCR, power derating and long-term stability dR/R20 [%] Temperaturabhangigkeit des elektrischen Widerstandes von MANGANIN(R)-Widerstanden / Temperature dependence of the electrical resistance of MANGANIN(R)-resistors Grenzkurve / Limiting curve Typische Temperaturabhangigkeit eines RTO-B Widerstandes / Typical temperature dependence of a RTO-B resistor Temperatur [C] / Temperature [C] Lastminderungskurve fur RTO-B montiert auf Kuhlkorper / Power derating curve for heatsink mounted RTO-B Verbesserte Stabilitat / Improved stability 0.5 % Stabilitat / Stability 1.0 % Gehausebodentemperatur TK [C] / Package bottom temperature TK [C] Widerstandsanderung [%] / Resistance change [%] Langzeitstabilitat von Manganin(R) - Widerstanden bei 140 C / Long-term stability of Manganin(R) - resistors at 140 C Auslagerungszeit [h] / Time [h] Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue RTO-B-2013-05-16 2/4 RTO-B Bauform SOT 227B (ISOTOP) / Size SOT 227B (ISOTOP) Bestellbezeichnung / ordering code RTO-B-R001-1.0 Typ / Type Widerstandswert / Resistance value Toleranz / Tolerance RTO-B 1 mOhm 1.0 % Montagehinweis / Assembly instruction Max. zulassiges Anzugsmoment fur Schrauben / Max. allowed torque for screws Grundplatte / Base plate Anschluss / Terminal M4 2 Nm M4 2 Nm RoHS 2011/65/EU konform. Ausfuhrliche Informationen erhalten Sie auf unserer Homepage: www.isabellenhuette.de RoHS 2011/65/EU compliance. For more information please visit our website: www.isabellenhuette.de Gewahrleistung Alle Angaben uber Eignung, Verarbeitung und Anwendung unserer Produkte, technische Beratung und sonstige Angaben erfolgen nach bestem Wissen, befreien den Kaufer jedoch nicht von eigenen Prufungen und Versuchen. Warranty All information regarding the suitability, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests. Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue RTO-B-2013-05-16 3/4 RTO-B Bauform SOT 227B (ISOTOP) / Size SOT 227B (ISOTOP) Grenzkurve fur maximale Pulsenergie bzw. Pulsleistung fur Dauerbetrieb / Maximum pulse energy respectively pulse power for permanent operation 10000 1000 Die dargestellte Kurve gilt fur den Widerstandswert R001. Fur andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate Qualifikation erfolgen sollte. This curve is only valid for the resistance value R001. The progression of the curve in the lower range could be different for other resistance values. Therefore a separate qualification should be made in thresholds. Spezifikation/Specification Parameters Test Conditions Specification Maximum Temperature for full power operation 95 C 95 C Typical data Working Temperature -55 to 170 C -55 to 170 C Thermal Shock MIL-STD-202 method 107-B1 0.2 % 0.1 % Overload MIL-R-26E (5 times rated power, 5 sec) 0.2 % 0.1 % Solderability MIL-STD-202 method 208 n.a. n.a. Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d no damage no Low Temperature Storage and Operation MIL-STD-26E 0.2 % 0.05 % Terminal Strength MIL-STD-202 method 211A 50N, 0.02 % > 100 N. 0.01 % Resistance to Soldering Heat MIL-STD-202 method 210 0.1 % 0.02 % Moisture Resistance MIL-STD-202 method 106 0.2 % 0.1 % Shock MIL-STD-202 method 213-A 0.2 % 0.03 % Vibration, High Frequency MIL-STD-202 method 204-B 0.2 % 0.1 % Life MIL-STD-26E 0.5 % 0.2 % Storage Life at Elevated Temperature MIL-STD-202 method 108-F 0.3 % 0.2 % High Temperature Exposure 140 C, 2000 h 0.5 % 0.2 % Current Noise MIL-STD-202 method 308 0.01 % < 0.001 % Voltage Coefficient (%/V) MIL-STD-202 method 309 linearity error less than 120dB Resistance Temperature Characteristic MIL-STD-202 method 304 (20-60 C) < 50 ppm/K < 30 ppm/K Thermal EMF 0 - 100 C 2 V/K max. 0.5 V/K max. Frequency Characteristic R 10 mOhm inductivity < 5 nH Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Isabellenhutte Heusler GmbH & Co. KG Ausgabe / Issue RTO-B-2013-05-16 Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30 4/4