http://www.tracopower.com Page 1 of 3
DC/DC Converters
TEM 3 Series, 3 Watt
The TEM 3 series is a range of isolated dc/dc converters in a DIL-24 package. They
offer tight output regulation and very low output noise. Operating temperature ran-
ge is –25°C to +71°C. This product series provdes a cost effective solution for many
industrial or consumer electronics applications.
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEM 3-0511 5 VDC 600 mA 60 %
TEM 3-0512 12 VDC 250 mA 62 %
TEM 3-0521 5 VDC ±10% ±12 VDC ±125 mA 60 %
TEM 3-0522 ±15 VDC ±100 mA 60 %
TEM 3-1211 5 VDC 600 mA 60 %
TEM 3-1212 12 VDC 250 mA 62 %
TEM 3-1221 12 VDC ±10% ±12 VDC ±125 mA 60 %
TEM 3-1222 ±15 VDC ±100 mA 60 %
TEM 3-2411 5 VDC 600 mA 60 %
TEM 3-2412 12 VDC 250 mA 64 %
TEM 3-2421 24 VDC ±10% ±12 VDC ±125 mA 60 %
TEM 3-2422 ±15 VDC ±100 mA 60 %
Features
DIL-24 metal package
Tightly regulated output
Very low output noise
Short circuit protection
Operating temperature
range –25°C to +71°C
I/O isolation 1’000 VDC
Internal filter
Industry standard pinout
3-year product warranty
UL 60950-1
C
B
Scheme
Models
obsolete
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load / full load 5 Vin models: 100 mA / 980 mA typ.
12 Vin models: 50 mA / 410 mA typ.
24 Vin models: 25 mA / 205 mA typ.
Surge voltage (1 sec. max.) 5 Vin models: 7.5 V max.
12 Vin models: 15 V max.
24 Vin models: 30 V max.
Output Specifications
Voltage set accuracy ±3 %
Regulation – Input variation Vin min. to Vin max. ±0.5 % max.
– Load variation 10 – 100 %
single output models: ±0.5 % max.
dual output models balanced load: ±1.0 % max.
dual output models unbalanced load: ±3.0 % max.
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max
Temperature coefficient ±0.02 %/K
Current limitation >120 % of Iout max., constant current
Short circuit protection indefinite
Capacitive load single output models: 470 µF max.
dual output models: 220 µF max.
General Specifications
Temperature ranges – Operating –25°C to +71°C
– Case +95°C max.
– Storage –40°C to +125°C
Derating 3 %/K above +70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign) >600‘000 Mio. h
Isolation voltage (60 sec.) – Input/Output 1000 VDC
Isolation capacitance – Input/Output 100 pF typ.
Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 80 kHz typ. (Pulse frequency modulation PFM)
Safety standards cUL/UL 60950-1, IEC/EN 60950-1
Safety approval CSA File No. 226037
http://directories.csa-international.org
DC/DC Converters
TEM 3 Series 3 Watt
Page 3 of 3
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Physical Specifications
Casing material black coated metal
Weight 14 g (0.49 oz)
Soldering temperature max. 260°C / 10 sec.
Outline Dimensions mm (inches)
2.0
(0.08)
23
24 22
123
10.0
(0.39)
3.8
32.0
(1.26)
(0.1)(0.1)
2.54
(0.1)(0.1)
10 11 12
15 14 13
27.94
(1.1)
17.78
(0.7)
2.54 2.542.54
(0.15)
15.24 (0.6)
20.0 (0.79)
2.4
(0.094)
Bottom view
Pin diameter ø 0.5 ±0.05 (0.02) ±0.002
Tolerances ±0.5 (±0.02)
Pin Single Dual
1+Vin (Vcc) +Vin (Vcc)
2ntd. –Vout
3ntc. Common
10 –Vout Common
11 +Vout +Vout
12 –Vin (GND) –Vin (GND)
13 –Vin (GND) –Vin (GND)
14 +Vout +Vout
15 –Vout Common
22 ntc. Common
23 ntc. –Vout
24 +Vin (Vcc) +Vin (Vcc)
Pin-Out
DC/DC Converters
TEM 3 Series 3 Watt
Specifications can be changed any time without notice.
R e v. 03/11
ntc. = not to connect