1-1393812-1 - Tyco Electronics

Telecom-, Signal and RF Relays

AXICOM

Cradle Relay S V23054 / V23062

108-98014 • Nov. 07 • Rev. C • ECOC: JM10

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 2 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Index

Dimensions 4

Coil Data and operating range 6

Relay Code 7

Coil Data and Ordering Information 9

Instructions for Impulse Operation 12

Contact Data 13

Insulation / General Data 16

Disclaimer

While Tyco Electronics has made every reasonable effort

to ensure the accuracy of the information in this datasheet,

Tyco Electronics does not guarantee that it is error-free,

nor does Tyco Electronics make any other representati-

on, warranty or guarantee that the information is accurate,

correct, reliable or current. Tyco Electronics reserves the

right to make any adjustments to the information contai-

ned herein at any time without notice. Tyco Electronics

expressly disclaims all implied warranties (and all express

warranties, except as otherwise stated in this datasheet)

regarding the information contained herein, including but

not limited to any implied warranties or merchantability or

tness for a particular purpose. It is recommended that

you test any new or replacement product before incorpo-

rating into a system.

The dimensions in this datasheet are for reference purpo-

se only and are subject to change without notice. Speci-

cations are subject to change without notice.

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 3 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Hand solder and plug-in relay,

for DC operation,

non-polarized, non-latching

ROHS compliant (Directive 2002/95/EC) as per

product date code 0501.

Features

• Stronger magnet system and thus wider voltage range

than cradle relay N

• highly reliable

• Contacts for signal loads and currents up to 5 A

• AC and DC, latching and non-latching,

coils operating voltage 6 V ... 220 V

• Multi purpose relay

• Great variety of contact arrangements and

materials to meet specic applications

• Sockets for easy and quick mounting of relays (see

data sheet Accessories)

Typical applications

• Press controls with high safety requirements

(forcibly guided springs)

• Trafc and railroad signalling

• Motor vehicle trafc controls

Relay types

• Size I or II, depending on contact set

• Standard contact sets with max. 6 changeover contacts

or 6 make contacts

• Single or bifurcated contacts

• Hand solder terminals also for plug-in

connection with screw xing

• Dust-protected with plastic cover, V23054-XXX

• Hermetically sealed with metal enclosure, V23062-XXX

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 4 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Dimensions Dimensions in mm

Type V23054-Exxx Size III

Hand solder terminals, silver-plated

Also for plug-in connection and screw xing

With earth terminal

Dust-protected

Type V23054-Cxxx Size I Type V23054-Dxxx Size II

Hand solder terminals, silver-plated

Also for plug-in connection and screw xing

With earth terminal

Dust-protected

For sockets and hold-down springs see data sheet Accessories

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Dimensions Dimensions in mm

Type V23062-Axxx Size I Type V23062-Bxxx Size II

Hand solder terminals, silver-plated

Also for plug-in connection and screw xing

With earth terminal

hermeticaly sealed with metal enclosure

For sockets and hold-down springs see data sheet Accessories

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 6 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Coil Data and operating range

Nominal voltage from 6 Vdc to 220 Vdc

Typical nominal power consumption, at 20 °C 1 W

Class of the operative range

acc to EN 61810-1 / IEC 61810-1 and VDE 0435 Part 201 2

Operating voltage (according to the coil type) max. 92% of the nominal voltage

Terminals:

Coil with 1 winding

Start 4 End 1

Coil with 2 windings (upon request)

Start 3 End 2 for winding I

Start 4 End 1 for winding II

The minimum voltage UI depends on the contact set and the ambient temperature, the maximum voltage UII

only depends on the ambient temperature.

Between minimum voltage UI tamb and operating voltage U a safety margin of approx. 20% is recommended.

UI tamb (1.2) < UI

≤

UII tamb

UI tamb = UI · U20 °C · kI tamb

UII tamb = UIl 20 °C · kII tamb

tamb = Ambient temperature

U = Operating voltage

UI tamb = Minimum voltage at ambient temperature, tamb

UII tamb = Maximum voltage at ambient temperature, tamb

kI and kII = Factors

Note: Instructions for impulse operation

see data sheet cradle relay N

Ambient temperature tamb [°C]

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 7 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Coil number

Version see page 9

011 = 6V

015 = 12V

020 = 24V

026 = 60V Nominal voltage

004 = 110V

013 = 125V

003 = 220V

V23054

Identication of the

cradle relay S, dust protected

Relay type

C = Size I

D = Size II

E = Size III

Contact set / type of contact

see page 13/14

Ordering example:

V23054-D0020-B110

Cradle relay S, size II, standard version, coil 24 Vdc, 4 changeover contact set, single contacts,

contact material silver, gold-ashed

Note:

The ordering scheme enables a multitude of variations. However, not all variations are dened as construction

specications (ordering code) and thus in the current delivery program.

Special design can be carried out to customer specications. Please contact your local representative.

Relay Code

0 = standard version

1 = tted with contact sets F (block 3)

2 = for higher test voltage

3 = contact sets F and higher test voltage winding / frame

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Coil number

Version see page 11

011 = 6V

015 = 12V

020 = 24V

026 = 60V Nominal voltage

004 = 110V

013 = 125V

003 = 220V

V23062

Identication of the

cradle relay S, hermetically sealed

Relay type

A = Size I

B = Size II

Contact set / type of contact

see page 13/14

Ordering example:

V23062-B0020-C110

Cradle relay S, size II, standard version, coil 24 Vdc, 4 changeover contact set, bifurcated contacts,

contact material silver, gold-ashed

Note:

The ordering scheme enables a multitude of variations. However, not all variations are dened as construction

specications (ordering code) and thus in the current delivery program.

Special design can be carried out to customer specications. Please contact your local representative.

Relay Code

0 = standard version

1 = tted with contact sets F (block 3)

2 = for higher test voltage

3 = contact sets F and higher test voltage winding / frame

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 9 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Coil Data (values at 23 °C) Ordering Information

Nominal

voltage

Unom

Operate/set voltage range Coil

power

Coil

Resistance

Relay

code

Tyco part

number

Minimum

voltage Umin

Maximum

voltage Umax

Vdc Vdc Vdc mW Ω / ± 15 %

V23054-CXXXX standard, size I

125 59 190 1‘008 15500 V23054C13B104 2-1419172-8

12 4.7 18 1‘108 130 V23054C15B104 1393812-6

12.5 5.4 21.5 845 185 V23054C16B104 1393812-7

20 10.5 31 1‘026 390 V23054C19C104 1422019-3

220 98 240 1‘936 25000 V23054C2003C404 3-1393812-2

110 44 145 1‘315 9200 V23054C2004B104 3-1393812-3

125 59 190 1‘008 15500 V23054C2013B104 3-1393812-4

24 10.5 39 914 630 V23054C2020B104 3-1393812-5

60 36 94 947 3800 V23054C2026C104 3-1393812-6

24 10.5 39 914 630 V23054C20B104 1-1393812-0

24 13 39 914 630 V23054C20C104 1-1393812-1

32 14.5 50 975 1050 V23054C21B104 1-1393812-2

32 17.5 50 975 1050 V23054C21C104 1-1393812-3

32 17.5 50 975 1050 V23054C21C404 1-1393812-4

45 19 66 1‘066 1900 V23054C22B104 1-1393812-5

45 24 66 1‘066 1900 V23054C22C104 1-1393812-6

60 29 94 947 3800 V23054C26B104 2-1393812-0

60 36 94 947 3800 V23054C26C104 2-1393812-3

60 36 94 947 3800 V23054C26C404 2-1393812-4

220 79 240 1‘936 25000 V23054C3B104 1393812-2

220 98 240 1‘936 25000 V23054C3C104 1393812-3

110 44 145 1‘315 9200 V23054C4B104 1393812-4

110 53.5 145 1‘315 9200 V23054C4C104 1393812-5

V23054-CXXXX 5A, size I

32 14.5 50 975 1050 V23054C1021F106 3-1393812-0

45 19 66 1‘066 1900 V23054C1022F105 3-1393812-1

12 4.7 18 1‘108 130 V23054C3015F105 1422019-5

32 14.5 50 975 1050 V23054C3021F106 3-1393812-7

Further coil versions are available on request.

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 10 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

V23054-DXXXX standard, size II

125 59 190 1‘008 15500 V23054D13B110 4-1419172-5

12 4.7 18 1‘108 130 V23054D15B112 6-1422019-5

12.5 5.4 21.5 845 185 V23054D16C110 4-1393812-2

16 7 25.5 948 270 V23054D17B110 4-1393812-3

16 7 25.5 948 270 V23054D17B110 4-1393812-4

20 10.5 31 1‘026 390 V23054D19B110 4-1393812-6

20 10.5 31 1‘026 390 V23054D19C110 4-1393812-7

20 10.5 31 1‘026 390 V23054D19C410 5-1393812-0

220 79 240 1‘936 25000 V23054D2003B110 1393813-1

125 59 190 1‘008 15500 V23054D2013B110 1393813-2

24 10.5 39 914 630 V23054D2020B110 1393813-3

32 14.5 50 975 1050 V23054D2021B110 1393813-4

32 14.5 50 975 1050 V23054D2021B112 1393813-5

60 29 94 947 3800 V23054D2026B110 1393813-6

60 29 94 947 3800 V23054D2026B112 1393813-7

24 10.5 39 914 630 V23054D20B110 5-1393812-1

24 10.5 39 914 630 V23054D20B112 5-1393812-2

24 13 39 914 630 V23054D20C110 5-1393812-3

24 13 39 914 630 V23054D20C410 3-1419137-7

32 14.5 50 975 1050 V23054D21B110 5-1393812-4

32 17.5 50 975 1050 V23054D21C112 5-1393812-5

45 19 66 1‘066 1900 V23054D22B110 5-1393812-8

45 24 66 1‘066 1900 V23054D22C110 5-1393812-9

60 29 94 947 3800 V23054D26B110 6-1393812-2

60 29 94 947 3800 V23054D26B112 6-1393812-3

60 43 94 947 3800 V23054D26C110 6-1393812-4

60 36 94 947 3800 V23054D26C112 6-1393812-5

60 29 94 947 3800 V23054D26C114 6-1393812-6

220 79 240 1‘936 25000 V23054D3B110 3-1393812-8

110 44 145 1‘315 9200 V23054D4C110 3-1393812-9

V23054-DXXXX 5A, size II

220 98 240 1‘936 25000 V23054D1003F104 8-1393812-6

110 53.5 145 1‘315 9200 V23054D1004F104 8-1393812-7

6 2.9 9 1‘091 33 V23054D1011F104 8-1393812-8

8.4 4.4 13 1‘008 70 V23054D1012F104 8-1393812-9

12 5.8 18 1‘108 130 V23054D1015F104 9-1393812-0

16 8.7 25.5 948 270 V23054D1017F104 9-1393812-1

20 10.5 31 1‘026 390 V23054D1019F104 9-1393812-2

24 13 39 914 630 V23054D1020F104 9-1393812-3

32 17.5 50 975 1050 V23054D1021F104 9-1393812-4

45 24 66 1‘066 1900 V23054D1022F104 9-1393812-5

60 36 94 947 3800 V23054D1026F104 9-1393812-8

220 98 240 1‘936 25000 V23054D3003F104 1393813-9

110 53.5 145 1‘315 9200 V23054D3004F104 1-1393813-1

24 13 39 914 630 V23054D3020F104 1-1393813-4

60 36 94 947 3800 V23054D3026F104 1-1393813-6

Coil Data (values at 23 °C) Ordering Information

Nominal

voltage

Unom

Operate/set voltage range Coil

power

Coil

Resistance

Relay

code

Tyco part

number

Minimum

voltage Umin

Maximum

voltage Umax

Vdc Vdc Vdc mW Ω / ± 15 %

Further coil versions are available on request.

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 11 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

V23054-EXXXX standard, size III

8.4 4.4 13 1‘008 70 V23054E12B133 2-1393813-5

12 5.8 18 1‘108 130 V23054E15B133 2-1393813-6

12 8.8 18 1‘108 130 V23054E15C133 2-1393813-7

12.5 6.9 21.5 845 185 V23054E16B133 2-1393813-8

12.5 10 21.5 845 185 V23054E16C133 3-1393813-0

16 8.7 25.5 948 270 V23054E17B133 3-1393813-1

16 13 25.5 948 270 V23054E17C133 3-1393813-2

20 10.5 31 1‘026 390 V23054E19B133 3-1393813-3

20 15.5 31 1‘026 390 V23054E19C133 3-1393813-4

20 15.5 31 1‘026 390 V23054E19C433 3-1393813-5

110 53.5 145 1‘315 9200 V23054E2004B133 9-1393813-0

125 73 190 1‘008 15500 V23054E2013B133 1422019-2

60 36 94 947 3800 V23054E2026B133 9-1393813-4

24 13 39 914 630 V23054E20B133 3-1393813-6

24 13 39 914 630 V23054E20B533 3-1393813-9

24 13 39 914 630 V23054E20B633 4-1393813-0

24 20 39 914 630 V23054E20C133 4-1393813-1

24 20 39 914 630 V23054E20C433 4-1393813-2

32 17.5 50 975 1050 V23054E21B133 4-1393813-3

45 24 66 1‘066 1900 V23054E22B133 4-1393813-4

45 24 66 1‘066 1900 V23054E22B633 4-1393813-5

45 35 66 1‘066 1900 V23054E22C133 4-1393813-6

60 36 94 947 3800 V23054E26B133 4-1393813-8

60 55 94 947 3800 V23054E26C133 4-1393813-9

60 43 94 947 3800 V23054E26C148 5-1393813-2

V23054-EXXXX 5A, size III

220 118 240 1‘936 25000 V23054E1003F110 5-1393813-9

110 66 145 1‘315 9200 V23054E1004F110 6-1393813-0

6 3.5 9 1‘091 33 V23054E1011F110 6-1393813-1

8.4 5.3 13 1‘008 70 V23054E1012F110 6-1393813-2

12 718 1‘108 130 V23054E1015F110 6-1393813-3

12.5 8.1 21.5 845 185 V23054E1016F110 6-1393813-6

16 10.5 25.5 948 270 V23054E1017F110 6-1393813-8

20 13 31 1‘026 390 V23054E1019F110 7-1393813-2

24 15.5 39 914 630 V23054E1020F110 7-1393813-6

32 21 50 975 1050 V23054E1021F110 8-1393813-1

45 29 66 1‘066 1900 V23054E1022F110 8-1393813-2

60 43 94 947 3800 V23054E1026F110 8-1393813-5

24 15.5 39 914 630 V23054E3020F110 1-1393814-0

V23062-AXXXX standard, size I

76 32 110 996 5800 V23062A14C404 1393815-1

28 15 40 980 800 V23062A25C104 1393815-2

29 13 43 945 890 V23062A46C104 1393815-3

V23062-BXXXX standard, size II

20 13 31 1‘026 390 V23062B19C410 1393815-4

24 15.5 39 914 630 V23062B20C110 1393815-5

45 29 66 1‘066 1900 V23062B22C110 1393815-7

60 29 94 947 3800 V23062B26B610 1393815-8

V23062-BXXXX 5A, size II

110 53.5 145 1‘315 9200 V23062B1004F104 1-1393815-1

60 36 94 947 3800 V23062B1026F104 1-1393815-7

Coil Data (values at 23 °C) Ordering Information

Nominal

voltage

Unom

Operate/set voltage range Coil

power

Coil

Resistance

Relay

code

Tyco part

number

Minimum

voltage Umin

Maximum

voltage Umax

Vdc Vdc Vdc mW Ω / ± 15 %

Further coil versions are available on request.

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 12 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Instructions for Impulse Operation

The maximum voltage stated in the table (page 6) can be increased for impulse operation as follows:

UII Impuls = UII tamb . q

UII tamb = Maximum continuous voltage at ambient temperature t amb

q = Factor

The impulse voltage must not exceed 80% of the test voltage (winding/frame or winding/winding) or not to exceed the

max. voltage as listed in the table (page 6) by no more than 2.3 told.

Ift ED

≤

3 s then q =

Ift ED = Pulse width

t2 = Cycle time

If tED > 3 s the value of q must be obtained from the nomograph (next page).

Examples of various periodic pulse trains (energizing side)

1. Periodic recurrence of one energizing pulse

2. Periodic recurrence of two unequal energizing pulses

tED = tI + tII

tI + tII = Pulse widths within one cycle

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 13 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Contact Data

Ordering code block 3 B104/B110/

B112/B133

B604/B610/

B612/B633

C104/C110/

C112/C133

C404/C410

C412/C433

F104/F105

F110

Number of contacts and Type max. 6 changeover contacts or 6 make contacts

Contact assembly single contacts bifurcated contacts single contacts

Contact material silver,

gold-ashed gold F silver,

gold-ashed

Max. switching voltage 150 Vdc 36 Vdc 150 Vdc 36 Vdc 260 Vdc

125 Vac 30 Vac 125 Vac 30 Vac 250 Vac

Max. switching current 2 A 0.2 A 2 A 0.2 A 5 A

Max. switching capacity

35 to 70 W

see load limit

curve below

50 VA

5 W

5 VA

35 to 70 W

see load limit

curve below

50 VA

5 W

5 VA

50 to 140 W

see load limit

curve below

500 VA

Max. continuous current at

max. ambient temperature 2 A 5 A

70 W

40 W

150

120

100

0,3 0,4 0,5 0,6 0,8 1 1,5 2A

250

200

150

100

100 W

140 W

50 W

0,2 0,3 0,4 0,5 0,6 0,8 1 1,5 2 3 4 5A

Max. DC Load Breaking Capacity

Safe breaking, no stationary arc

Contact material silver, gold-ashed

for contact sets F1xx

I = switching current

U = switching voltage

for contact sets B1xx and C1 xx

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 14 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Contact sets

Size I

Number of contacts and type 2 changeover contacts 2 make contacts

Symbols with base conncections

3 2 4 1

- + - +

coil I coil II

Contacts in release condition,

coil polarity to set the relay

Contact assembly single

contacts

bifurcated

contacts single contacts

Contact material silver, gold-ashed

Ordering code block 3 B104 C104 F105

Contact material gold F

Ordering code block 3 B604 C404

Size II

Number of contacts and type 6 make contacts 4 changover contacts 2 changover

contacts

Symbols with base conncections

3 2 4 1

- + - +

coil I coil II

Contacts in release condition,

coil polarity to set the relay

Contact assembly single

contacts

bifurcated

contacts

single

contacts

bifurcated

contacts

single

contacts

Contact material silver, gold-ashed

Ordering code block 3 B112 C112 B110 C110 F104

Contact material gold F

Ordering code block 3 B612 C412 B610 C410

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 15 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Size III

Number of contacts and type 6 changeover contacts 4 changeover contacts

Symbols with base conncections

3 2 4 1

- + - +

coil I coil II

Contacts in release condition,

coil polarity to set the relay

Contact assembly single

contacts

bifurcated

contacts single contacts

Contact material silver, gold-ashed

Ordering code block 3 B133 C133 F110

Contact material gold F

Ordering code block 3 B633 C433

Contact sets

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 16 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

Insulation

General Data

Ordering code block 3 B1xx B6xx C1xx C4xx F1xx

Test voltage (1 min)

winding / frame

contact / contact

contact / frame

500 Vacrms

1000 Vacrms

Ordering code block 3 B1xx B6xx C1xx C4xx F1xx

Operate time at Unom and 20 °C, typical 16 ms

Reset time typical 2 ms

Maximum switching rate without load 50 operations/s 10

operations/s

Ambient temperature range

acc. to EN 61810-1 / IEC 61810-1 and

VDE 0435 part 201

-40 °C ... +70 °C

Thermal resistance 40 K/W

Maximum temperature 100 °C

Continuous thermal load 2.1 W

Degree of protection acc. to EN 60529 /

IEC 60529 / VDE 0470 part 1 dust-protected IP 30 or hermetically sealed IP 67

Mechanical endurance approx.108

operations

approx. 107

operations

Mounting position any

Weight

V23054

Size I

Size II

Size III

V23062

Size I

Size II

approx. 20 g

approx. 25 g

approx. 27 g

approx. 30 g

approx. 35 g

108-98014 Rev. C

All specications subject to change. Consult Tyco Electronics for latest specications. 17 of 18

Telecom-, Signal and RF Relays

Cradle Relay S V23054/V23062

AXICOM

IM Relays

4th generation slim line – low prole polarized 2 c/o telecom signal relay

with bifurcated contacts, available as non latching or latching relay with

1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...

200 mW, latching relays with 1 coil 100 mW. The IM relay is available as

through hole and surface mount type (J-Legs and Gull Wings) and capable

to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G

relay on the market. Dielectric strength fullls the Telcordia requirements

according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).

The IM relay is tested according CECC/IECQ and certied in accordance

with IEC/EN 60950 and UL 60950.

Dimensions approx. 10 x 6 mm board space and 5.65 mm height.

P2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal voltage

range from 3 ... 24 V, coil power consumption 140 mW, latching relays

with 1 coil 70 mW. The P2 Relay is available as through hole or surface

mount type and capable to switch currents up to 5 A. Dielectric strength

fullls the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)

and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according

CECC/IECQ and certied in accordance with IEC/EN 60950 and UL 60950.

Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

FX2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 coil. Nominal voltage

range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high

sensitive version, 140... 300 mW for the standard version, latching relays

with 1 coil 100 mW. The FX2 relay is available as through hole type and

capable to switch loads up to 60 W/62,5 VA. Dielectric strength fullls the

Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC

part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/

IECQ and certied in accordance with IEC/EN 60950 and UL 60950.

Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.

FT2 / FU2 Relays

3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-

ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption

200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and

surface mount type. Dielectric strength fullls the Telcordia requirements

according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /

160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certied

in accordance with IEC/EN 60950 and UL 60950.

Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

FP2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal voltage

range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the

high sensitive version, 140... 300 mW for the standard version, latching

relays with 1 coil 100 mW.. The FP2 Relay is available as through hole

type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength

fullls FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according

CECC/IECQ approved.

Dimensions approx. 14 x 9 mm board space and 5 mm height.

MT2

2nd generation non polarized, non latching 2 c/o telecom and si-

gnal relay with bifurcated contacts. Nominal voltage range from 3

... 48 V, coil power consumption 150/200/300/400 and 550 mW.

Dielectric strength fulfills the requirements according FCC part 68

(1,5 kV – 10 / 160 µs).

Dimensions approx. 20 x 10 mm board space and 11 mm height.

D2n Relays

2nd generation non polarized 2 c/o relay for telecom and various other ap-

plications. Nominal voltage range from 3 ... 48 V, coil power consumption from

150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric

strength fullls the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).

Dimensions approx. 20 x10 mm board space and 11 mm height.

P1 Relays

Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a

wide range of applications, available as non latching or latching relay with

1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption

65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as

through hole or surface mount type and capable to switch currents up to 1

A. Dielectric strength fullls the requirements according FCC part 68 (1,5

kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7

mm height for THT or 8 mm height for SMT version.

W11 Relays

Low cost, non polarized 1 c/o relay for various applications. Nominal

voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive

versions 200 mW. The W11 relay is capable to switch currents up to 3 A.

Dielectric strength 1000 Vrms.

Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.

Reed Relays

High sensitive, non polarized relay for telecom and various other applica-

tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range

from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...

280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or

SIL housing and capable to switch currents up to 0,5 A. Integrated diode

and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-

sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or

19,8 x 5 mm board space and 7,8 mm height for SIL version.

Cradle Relays

Extremely reliable and mature relay family of 1st generation for various signal

switching applications. Available as non polarized, polarized / latching and

relay with AC coil. The benet is the possibility of combining various contact

sets from 1 up to 6 poles, single and bifurcated contacts, different contact

materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are

available as dust protected and hermetically sealed versions, with plug in or

solder terminals and are capable to switch currents up to 5 A. Forcibly guided

(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from

approx. 19 x 24 to 19x35 mm board space and 30 mm height.

Other Relays

We offer a variety of different relay families for maintenance and replace-

ment purposes. These relays are up to 60 years old now, such as Card

Relay SN (V23030 series), Small General Purpose Relay (V23006 series),

Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).

Accessories like sockets, hold down springs, etc. optional.

High Frequency Relays

HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics

in a small package. All HF series relays are suitable for SMD soldering

processes. Available as non latching or latching versions with 1 or 2 coils

and a nominal coil voltage range from 3 … 24 V, a coil power consumption

of 140 mW or 70 mW (single coil latching types).

HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.

50 W hot switching and 50 W RF power carry capability.

Dimensions 14.6 x 7.3 x 10.3 mm.

HF3S: High performance, high power RF relay suitable up to 3 GHz,

50 W hot switching and 150 W RF power carry capability.

Dimensions 15 x 7.6 x 10.6 mm.

HF6: High performance, high power RF relay suitable up to 6 GHz,

50 W hot switching and 50 W RF power carry capability.

Dimensions 15 x 7.6 x 10.6 mm.

Telecom-, Signal and RF Relays

AXICOM

Tyco Electronics Logistics AG

Werk Axicom Au

Seestrasse 295

CH-8804 Au-Wädenswil / Switzerland

Phone +41 44 782 91 11

Fax +41 44 782 90 00

E-mail: axicom@tycoelectronics.com

Tyco Electronics

Paulsternstrasse 26

D-13629 Berlin / Germany

Phone +49 30 386 38573

Fax +49 30 386 38575

E-mail: axicom@tycoelectronics.com

Tyco Electronics EC Trutnov s.r.o.

Komenského 821

CZ-541 01 Trutnov / Czech Republic

E-mail: axicom@tycoelectronics.com

Tyco Electronics Corporation

POB 3608,

Harrisburg, PA 17105, USA

Phone +1 800-522-6752