TransGuard(R) AVX Multilayer Ceramic Transient Voltage Suppressors VOLTAGES = 3.3, 5.6, 14, 18, 26, 30 OR 48 VDC 1206 SURFACE MOUNT Dimensions: Actual Size: Length Width Thickness Land Length Termination Finish AVX Part Number 3.20 0.2mm (0.126" 0.008") 1.60 0.2mm (0.063" 0.008") 1.02mm Max. (0.040") 0.71mm Max. (0.028") X = Pt/Pd/Ag (Non-Plated) P = Ni/Sn Alloy (Plated) - Contact Factory for Availability Working Breakdown Clamping Voltage Voltage Voltage Peak Current Transient Energy Capacitance Inductance Symbol VWM VB VC Ipeak Etrans C L Units Volts (max.) Volts Volts (max.) Amp (max.) Joules (max.) pF (typ.) nH (typ.) Test Condition <50A 1mA DC 8/20S 8/20s 10/1000S 0.5Vrms @: 1kHz 1 MHz di/dt = 100mA/nS VC120603A100 _ _ VC120603D100 _ _ 3.3# 3.3# 4.1 - 6.0 3.7 - 5.6 10 10 40 150 0.1 0.4 2000 4700 1500 3800 <1.7 1.7 VC120605A150 _ _ VC120605D150 _ _ 5.6 5.6 7.6 - 9.3 7.1 - 8.7 15.5 15.5 40 150 0.1 0.4 1200 3000 870 2300 <1.7 1.7 VC120614A300 _ _ VC120614D300 _ _ 14 14 16.5 -20.3 15.9 -19.4 30 30 40 150 0.1 0.4 600 1200 500 900 <1.7 1.7 VC120618A400 _ _ VC120618D400 _ _ 18* 18* 22.9 -28.0 22.5 -27.5 40 40 30 150 0.1 0.4 350 800 270 635 <1.7 1.7 VC120626D580 _ _ 26 30.5 -37.3 58 120 0.4 550 450 1.7 VC120630D650 _ _ 30 36.0 -45.0 65 120 0.4 500 400 1.7 VC120648D101 _ _ 48 56.0 -68.0 100 100 0.4 225 185 1.7 VC12LC18A500 _ _ See pages 14-15 for specification and performance details. Termination Finish: X = Pt/Pd/Ag (Non-Plated) P = Ni/Sn Alloy (Plated) Contact Factory for Availability Packaging (Pcs/Reel): see page 2 VWM--Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50A leakage current VB--Voltage across the device measured at 1mA DC current VC--Maximum peak voltage across the varistor measured at a specified pulse current and waveform Transient Energy Rating 0.1 Joule 0.4 Joules Pulse Current & Waveform 2A 8/20S 10A 8/20S Ipeak--Maximum peak current which may be applied with the specified waveform without excessive leakage Etran--Maximum energy which may be dissipated with the specified waveform without device failure C--Device capacitance measured with zero volt bias 0.5Vrms and 1kHz L--Device inductance measured with a current edge rate of 100 mA/nS *Withstands 24.5 VDC for 5 minutes (automotive applications) Dimensions: Millimeters (Inches) #Test condition <100A 7