7
AVXWorking Breakdown Clamping Peak Transient
Part Number Voltage Voltage Voltage Current Energy Capacitance Inductance
Symbol VWM VBVCIpeak Etrans CL
Units Volts Volts Volts Amp Joules pF nH
(max.) (max.) (max.) (max.) (typ.) (typ.)
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS 0.5Vrms @: di/dt = 100mA/nS
1kHz 1 MHz
VC120603A100 _ _ 3.3# 4.1 - 6.0 10 40 0.1 2000 1500 <1.7
VC120603D100 _ _ 3.3# 3.7 - 5.6 10 150 0.4 4700 3800 1.7
VC120605A150 _ _ 5.6 7.6 - 9.3 15.5 40 0.1 1200 870 <1.7
VC120605D150 _ _ 5.6 7.1 - 8.7 15.5 150 0.4 3000 2300 1.7
VC120614A300 _ _ 14 16.5 -20.3 30 40 0.1 600 500 <1.7
VC120614D300 _ _ 14 15.9 -19.4 30 150 0.4 1200 900 1.7
VC120618A400 _ _ 18* 22.9 -28.0 40 30 0.1 350 270 <1.7
VC120618D400 _ _ 18* 22.5 -27.5 40 150 0.4 800 635 1.7
VC120626D580 _ _ 26 30.5 -37.3 58 120 0.4 550 450 1.7
VC120630D650 _ _ 30 36.0 -45.0 65 120 0.4 500 400 1.7
VC120648D101 _ _ 48 56.0 -68.0 100 100 0.4 225 185 1.7
VC12LC18A500 _ _ See pages 14-15 for specification and performance details.
VOLTAGES = 3.3, 5.6, 14, 18, 26, 30 OR 48 VDC
1206 SURFACE MOUNT
Dimensions: Actual Size:
Length 3.20 ± 0.2mm (0.126" ± 0.008")
Width 1.60 ± 0.2mm (0.063" ± 0.008")
Thickness 1.02mm Max. (0.040")
Land Length 0.71mm Max. (0.028")
Termination Finish X = Pt/Pd/Ag (Non-Plated)
P = Ni/Sn Alloy (Plated) - Contact Factory for Availability
VWM—Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50µA leakage current
VB—Voltage across the device measured at 1mA DC current
VC—Maximum peak voltage across the varistor measured at a specified pulse current and waveform
†Transient Energy Rating Pulse Current & Waveform
0.1 Joule 2A 8/20µS
≥0.4 Joules 10A 8/20µS
Ipeak—Maximum peak current which may be applied with the specified waveform without excessive leakage
Etran—Maximum energy which may be dissipated with the specified waveform without device failure
C—Device capacitance measured with zero volt bias 0.5Vrms and 1kHz
L—Device inductance measured with a current edge rate of 100 mA/nS
*Withstands 24.5 VDC for 5 minutes (automotive applications)
Dimensions: Millimeters (Inches)
#Test condition <100µA
TransGuard®
AVX Multilayer Ceramic Transient Voltage Suppressors
Termination Finish: X = Pt/Pd/Ag (Non-Plated)
P = Ni/Sn Alloy (Plated) Contact Factory for Availability
Packaging (Pcs/Reel): see page 2
