EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Right Angle Lens 48-213/GHC-YR2T1KW/3C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 48-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Part No. 48-213/GHC-YR2T1KW/3C Revision Chip Material Emitted Color AlGaInP Brilliant Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Resin Color Water Clear Page: 1 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Package Outline Dimensions 0.300.05 1.2 0.6 1.0 1.80 0.35 0.9 0.35 0.30 0.9 0.8 0.9 Cathode Mark Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 2 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 140 ----- 360 mcd Viewing Angle 21/2 ---- 120 ---- deg Peak Wavelength p ---- 518 ---- nm Condition IF=15mA Dominant Wavelength Spectrum Radiation Bandwidth d 520 ---- 535 nm ---- 35 ---- nm Forward Voltage VF 2.7 ---- 3.3 V Reverse Current IR ---- ---- 50 A VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 3 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Bin Range Of Luminous Intensity Bin Min Max Unit Condition R2 140 180 225 285 180 225 285 360 mcd IF=15mA Unit Condition nm IF=15mA Unit Condition V IF=15mA S1 S2 T1 Bin Range Of Dom. Wavelength Group Bin Min Max X 520 525 Y 525 530 Z 530 535 Bin Min Max 10 2.7 2.9 11 2.9 3.1 12 3.1 3.3 Y Bin Range Of Forward Voltage Group K Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 4 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Current vs. Forward Voltage I (mA) 40 F 75 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 100 10 1 -60 -40 -20 3.4 0 20 40 60 80 100 1000 10 1 10 10 IF(mA) 10 Forward Current IF(mA) Radiation Diagram 0 50 Forward Current 4.5 100 Forward Current Derating Curve Ta=25C 10 20 30 40 40 30 25 1.0 20 0.9 50 0.8 60 10 70 0.7 0 0 20 40 60 85 80 90 100 0.5 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 LifecyclePhase: 4.2 f=1KHz Duty=1/10 Ambient Temperature Ta (C) :1 3.8 Luminous Intensity vs Forward Current Ta=25C Luminous Intensity vs. 1000 3.0 Forward Voltage VF (V) Wavelength (nm) Revision Ta=25C 50 Forward Current Relative luminous intensity (%) Ta=25 100 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 5 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm , Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 6 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Label Rev. 1 Page: 7 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 8 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 9 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 48-213/GHC-YR2T1KW/3C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-483-G03 Prepared date: 28-May-2008 :1 LifecyclePhase: Rev. 1 Page: 10 of 10 Prepared by: Esther Yan Release Date:2008-09-20 00:15:56.0 Expired Period: Forever