FDS5670
FDS5670
60V N-Channel PowerTrenchTM MOSFET
Absolute Maximum Ratings TA = 25°C unless otherwise noted
Symbol Parameter Ratings Units
VDSS Drain-Source V ol tage 60 V
VGSS Gate-S ource Voltage ±20 V
IDDrain Current - Continuous (Note 1a) 10 A
- Pulsed 50
PDPower Dissipation for S ingle Operati on (Note 1a) 2.5 W
(Note 1b) 1.2
(Note 1c) 1
TJ, Tstg Operating and Storage Junction T emperature Range -55 to +150 °C
Thermal Characteristics
RθJA Thermal Re sistance, Junction-to-Ambient (Note 1a) 50 °C/W
RθJC Thermal Re sistance, Junction-to-Case (Note 1) 25 °C/W
Package Marking and Ordering Information
Device Marking Device Reel Size Tape Width Quantity
FDS5670 FDS5670 13’’ 12mm 2500 units
General Description
This N-Channel MOSFET has been designed specifically
to improve the overall efficiency of DC/DC converters using
either synchronous or conventional switching PWM
controllers.
These MOSFETs feature faster switching and lower gate
charge than other MOSFETs with comparable RDS(ON)
specifications.
The result is a MOSFET that is easy and safer to drive
(even at very high frequencies), and DC/DC power supply
designs with higher overall efficiency.
Features
10 A, 60 V. RDS(ON) = 0.014 Ω @ VGS = 10 V
RDS(ON) = 0.017 Ω @ VGS = 6 V.
Low gate charge.
Fast switching speed.
High performance trench technology for extremely
low RDS(ON).
High power and current handling capability.
6
7
8
5
3
2
1
4
S
D
S
S
SO-8
D
D
D
G
©1999 Semiconductor Components Industries, LLC.
October-2017, Rev. 2
Publication Order Number:
FDS5670/D
FDS5670
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Typ Max Units
Off Characteristics
BVDSS Drain-Sourc e Breakdown Voltage VGS = 0 V, ID = 250 µA60 V
∆BVDSS
∆TJ
Breakdown Voltage Temperature
Coefficient ID = 250 µA, Referenced to 25°C58 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 48 V, V GS = 0 V 1 µA
IGSSF Gate-Body Leakage Current, Forward VGS = 20 V, VDS = 0 V 100 nA
IGSSR Gate-Body Leak age Current, Reverse VGS = -20 V, V DS = 0 V -100 nA
On Characteristics (Note 2)
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA22.44 V
∆VGS(th)
∆TJ
Gate Threshold V oltage
Temperature Coefficient ID = 250 µA, Referenced to 25°C6.8 mV/°C
RDS(on) Static Drain-S ource
On-Resistance VGS = 10 V, I D = 10 A
VGS = 10 V, ID = 10 A, TJ=125°C
VGS = 6 V, ID = 9 A
0.012
0.019
0.014
0.014
0.027
0.017
Ω
ID(on) On-State Drain Current VGS = 10 V, V DS = 5 V 25 A
gFS Forward Transconductance VDS = 5 V, I D = 10 A 39 S
Dynamic Characteristics
Ciss Input Capacitance 2900 pF
Coss Output Capacit ance 685 pF
Crss Reverse Transf er Capacit ance
VDS = 15 V, VGS = 0 V
f = 1.0 MHz
180 pF
Switching Characteristics (Note 2)
td(on) Turn-On Delay Time 16 29 ns
trTurn-On Rise Time 10 20 ns
td(off) Turn-Off Del ay Ti m e 50 80 ns
tfTurn-Off Fall Time
VDD = 30 V, ID = 1 A
VGS = 10 V, RGEN = 6 Ω
23 42 ns
QgTotal Gate Charge 49 70 nC
Qgs Gate-Source Charge 9 nC
Qgd Gate-Drain Charge
VDS = 20 V, I D = 10 A
VGS = 10 V,
10.4 nC
Drain-Source Diode Characteristics and Maximum Ratings
ISMaximum Cont i nuous Drain-Source Diode Forward Current 2.1 A
VSD Drain-Source Di ode Forward Voltage VGS = 0 V, IS = 2.1 A (Note 2) 0.72 1.2 V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the
drain pins. RθJC is guaranteed by design while RθJA is determined by the user's board design.
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
a) 50° C/W when
mounted on a 0.5 in2
pad of 2 oz. copper.
b) 105° C/W when
mounted on a 0.02 in2
pad of 2 oz. copper.
c) 125° C/W when mounted
on a minimum pad.
www.onsemi.com
2
FDS5670
Typical Characteristics
Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation
with Drain Current and Gate Voltage.
Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage
Variation with Source Current
and Temperature.
Figure 3. On-Resistance Variation
with Temperature.
Figure 4. On-Resistance Variation
with Gate-to-Source Voltage.
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
-50 -25 0 25 50 75 100 125 150
T
J
, JUNCTION TEMPERATURE (
o
C)
R
DS(ON)
, NORMALIZED
DRAIN-SOURCE ON-RESISTANCE
I
D
= 10A
V
GS
= 10V
0
10
20
30
40
50
60
12345
V
GS
, GATE TO SOURCE VOLTAGE (V)
I
D
, DRAIN CURRENT (A)
T
A
= -55
o
C25
o
C
125
o
C
V
DS
=5V
0
0.01
0.02
0.03
0.04
0.05
345678910
V
GS
, GATE TO SOURCE VOLTAGE (V)
R
DS(ON)
, ON-RESISTANCE (OHM)
I
D
= 10A
T
A
= 125
o
C
T
A
= 25
o
C
0
10
20
30
40
50
60
01234
V
DS
, DRAIN-SOURCE VOLTAGE (V)
I
D
, DRAIN-SOURCE CURRENT (A)
V
GS
= 10V 6V
5V4.5V
3.5V
4V
0.0001
0.001
0.01
0.1
1
10
100
0 0.2 0.4 0.6 0.8 1 1.2
V
SD
, BODY DIODE VOLTAGE (V)
I
S
, REVERSE DRAIN CUR RE NT (A)
T
J
=125
o
C
25
o
C
-55
o
C
V
GS
=0
0.8
1
1.2
1.4
1.6
1.8
2
0 102030405060
I
D
, DRAIN CURRENT (A)
R
DS(ON)
, NORMALIZED
DRAIN-SOURCE ON-RESISTANCE
V
GS
= 4.0V
10V
5.0V
7.0V
4.5V
6.0V
www.onsemi.com
3
FDS5670
Typical Characteristics (continued)
0.001 0.01 0.1 1 10 100 300
0
10
20
30
40
50
SINGLE PULSE TIME (SEC)
POWER (W)
SINGLE PULSE
R =125°C/W
T = 25°C
θJA
A
Figure 7. Gate-Charge Characteristics. Figure 8. Capacitance Characteristics.
Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum
Power Dissipation.
Figure 11. Transient Thermal Response Curve.
Thermal characterization performed using the conditions described in Note 1c.
Transient themal response will change depending on the circuit board design.
0.0001 0.001 0.01 0.1 1 10 100 300
0.001
0.002
0.005
0.01
0.02
0.05
0.1
0.2
0.5
1
t , TI ME (s e c )
T R ANSI ENT TH ER MAL RESI ST ANC E
r(t), NORMALI Z ED EF F ECT I VE
1
S i n g l e P u l s e
D = 0. 5
0. 1
0.05
0.02
0. 0 1
0.2
D u t y C y c l e, D = t /t
12
R (t) = r(t) * R
R = 125°C/ W
θJA
θJA
θJA
T - T = P * R (t)
θ
JA
A
J
P(pk)
t
1
t
2
0.01
0.1
1
10
100
0.1 1 10 100
V
DS
, DRAIN-SOURCE VOLTAGE (V)
I
D
, DRAIN CURRENT (A)
DC10s
1s
100ms
10ms
1ms
100µs
R
DS(ON)
LIMIT
V
GS
= 10V
SINGLE PULSE
R
θJA
= 125
o
C/W
T
A
= 25
o
C
0
2
4
6
8
10
0 1020304050
Q
g
, GATE CHARGE (nC)
V
GS
, GATE-SOURCE VOLTAGE (V)
I
D
= 10A V
DS
= 10V
20V
30V
0
1000
2000
3000
4000
5000
0 102030
V
DS
, DRAIN TO SOURCE VOLTAGE (V)
CAPACITANCE (pF)
C
ISS
C
RSS
C
OSS
f = 1MHz
V
GS
= 0 V
www.onsemi.com
4
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
❖
