PL IA NT Features CO M Single pole/double throw Meets EIA/EIAJ/IPC/VRCI SMD standard outline dimensions *R oH S Compatible with most surface mount manufacturing processes 50 or 2000 cycle rotational life Compatible with popular vacuum pick-andplace equipment J-hook, gull-wing and through hole RoHS compliant* - see processing information on RoHS compliant surface mount components For switch applications/processing guidelines, click here 7814 SMD 4 mm Square Sealed Rotary Switch Electrical Characteristics Contact Rating Maximum Current ..........100 mA max. Maximum Voltage ........................16 V Contact Timing ..................Non-shorting Contact Resistance ........... 2 ohms max. Insulation Resistance ............................. 100 megohms min. Dielectric Strength .................... 250 VAC General Characteristics Switch Type ...................................SPDT Operating Temp. Range ............................... -55 C to +125 C Storage Temp. Range ..-55 C to +125 C Seal Test ......................85 C Fluorinert Mechanical Characteristics Positions ...............................................2 Adjustment Torque ......... 1.8 N-cm max. Stop Strength .................. 2.5 N-cm min. Pushover Strength (Z Style) ......................... 2 kilograms minimum Weight ................Approximately 0.2 gm. Marking........................... Manufacturer's trademark, life code and date code Environmental Characteristics Vibration ......................................... 20 G Shock ........................................... 100 G Thermal Shock ........................(5 cycles) -55 C to +125 C Humidity Insulation Resistance ............................... 10 megohms min. Rotational Life -051 ..................................... 50 Cycles -023 ................................. 2000 Cycles Packaging Options J & G ..................................... 500 pcs. Z ............................................ 200 pcs. H....................................100 pcs./tube How to Order Product Dimensions 7814J J-Hook 5.00 0.10 (.197 .004) OUTSIDE WHEN PINS ARE PARALLEL 4.50 (.177) C C ADJUSTMENT SLOT 5.00 4.50 (.197) (.177) CW CCW X 0.51 WIDE (.020) X 0.51 DEEP (.020) 0.20 TYP. (.008) 6.30 4.50 (.248) (.177) 2.45 LONG (.096) 2.55 (.100) CW 4.00 (.157) TYP. CCW RECOMMENDED PCB LAYOUT 1.30 0.10 (.051 .004) 2.0 (.079) 4.0 (.157) 1.00 (.039) 3 PLCS. 0.80 0.10 (.031 .004) 2 PLCS. 0.60 0.10 (.024 .004) 3 PLCS. 2.55 (.100) RECOMMENDED PCB LAYOUT 2.55 (.100) 5.00 (.197) 2.3 (.091) 2.35 (.093) 7814G Gull Wing 4.50 (.177) 0.80 TYP. DIA. (.031) 7814Z Right Angle 4.50 (.177) C 5 MAX. TYP. ADJUSTMENT SLOT 2.45 LONG (.096) 0.51 X WIDE (.020) 4.50 (.177) CW 2.55 (.100) 2.0 (.079) 3 PLCS. 1.3 (.051) 2 PLCS. X CCW ROTOR POSITIONED AS SHOWN WITHIN 22 OF CENTERLINE OF TERMINAL 2 0.60 (.024) TYP. 0.55 DEEP (.022) 0.20 (.008) TYP. 2.55 (.100) 1 C 3 2.30 (.091) 1.30 (.051) 2 PLCS. 0.80 0.10 (.031 .004) 2 PLCS. 6.20 (.244) 5.50 (.217) 1.30 (.051) 3 PLCS. 1.30 0.10 (.051 .004) 2.00 (.079) 5.00 (.197) Circuit Diagram - 7814J, G ,H 2.54 (.100) 1.27 (.050) 3.18 (.226) 0.61 (.024) 1.29 (.050) 5.01 (.197) C 2 CW Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 0.21 (.084) 3.48 (.138) 2.01 (.080) 2.01 (.080) CCW 1 DIMENSIONS: WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov 5.60 (.220) Circuit Diagram - 7814Z 2 1 0.96 (.038) RECOMMENDED PCB LAYOUT 2.54 0.26 (.100) (.010) 2.01 1.30 (.080) (.051) 1.19 (.047) C CCW 3 3.32 (.130) ADJ. SLOT 3.08 2.41 (.121) (.095) LONG 0.51 X (.020) WIDE 0.60 X (.024) DEEP 5.76 (.226) RECOMMENDED PCB LAYOUT 2.35 (.093) 7814 J - 1 - 051 E Model Terminal J = J-Hook G = Gull Wing H = Through-hole Z = Right Angle Switch Type 1 = SPDT Rotational Life -051 = 50 Cycles -023 = 2000 Cycles Optional Embossed Tape Designator (For pin styles J, G, Z only - omit for tube packaging) 7814H Throughhole 4.50 (.177) 3 CW MM (INCHES) TOLERANCES: 2 EXCEPT WHERE NOTED. * RoHS Directive 2002/95/EC Jan. 27, 2003 including Annex. "Fluorinert" is a registered trademark of 3M Co. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL