http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TSV Series 1 Watt
Input Specifications
Input current no load / full load 5 Vin models: 30 mA / 260 mA typ.
12 Vin models: 12 mA / 110 mA typ.
24 Vin models: 7 mA / 55 mA typ.
Surge voltage (1 sec. max.) 5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse voltage protection 0.3 A max.
Reflected input ripple current* can be reduced by ext. 1–3.3 µF polyester film
capacitor
Input filter internal capacitor
Output Specifications
Voltage set accuracy ±4 % max.
Voltage balance (dual output models, balanced load) 1 % max.
Regulation – Input variation 1.2 % / 1% change Vin
– Load variation 20 – 100 % 10 % max.
Ripple and noise (20 MHz Bandwidth) 75 mV pk-pk max.
Temperature coefficient ±0.02 %/K
Short circuit protection limited 0.5 sec. max.
Capacitive load 5 VDC single output models: 33 µF max.
5 VDC dual output model: 10 µF max.
12/15 VDC single output models: 4.7 µF max.
12/15 VDC dual output models: 2.2 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C (no derating)
– Case temperature +95°C max.
– Storage –40°C to +105°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign) >2’000’000 h
Isolation voltage (Input/Output, 60 sec.) 3‘000 VDC
Isolation capacitance (Input/Output) 60 pF typ.
Isolation resistance (Input/Output) >10‘000 M Ohm (500VDC)
Switching frequency 100 kHz typ. (frequency modulation)
Frequency change over line and load ±30 % max.
Physical Specifications
Casing material non conductive FR4 (UL 94V-0 rated)
Package weight 2.2 g (0.07 oz)
Reflow soldering profile peak temp. 245°C (10 sec. max.)
217°C for 90 sec. max. Convection reflow
solder process is recommended
Packaging information www.tracopower.com/overview/tsv