DC/DC Converters TSV Series, 1 Watt Features SMD package (SOIC-22) Isolated single and dual output models I/O isolation 3`000 VDC High efficiency up to 81 % Extended temperature range ded men m o c e r ot n n in esig d w e n for -40C to +85C High accuracy of pin co-planarity Available in tape and reel package Lead free design, RoHS compliant 3-year product warranty The TSV series are miniature, 1W DC/DC-converters with high isolation in a SMD package. The devices can be soldered without any problems in a high temperature lead free solder process. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrialand telecom field. Models Ordercode Input voltage TSV 0505S TSV 0512S Output voltage Output current max. Efficiency typ. 5 VDC 200 mA 71 % 12 VDC 80 mA 78 % 65 mA 78 % TSV 0515S 5 VDC 10 % 15 VDC TSV 0505D (Nominal 5 VDC) 5 VDC 100 mA 72 % TSV 0512D 12 VDC 40 mA 78 % TSV 0515D 15 VDC 30 mA 79 % TSV 1205S 5 VDC 200 mA 71 % TSV 1212S 12 VDC 80 mA 79 % TSV 1215S 12 VDC 10 % 15 VDC 65 mA 80 % TSV 1205D (Nominal 12 VDC) 5 VDC 100 mA 74 % TSV 1212D 12 VDC 40 mA 80 % TSV 1215D 15 VDC 30 mA 81 % TSV 2405S 5 VDC 200 mA 71 % TSV 2412S 12 VDC 80 mA 78 % 15 VDC 65 mA 79 % TSV 2415S 24 VDC 10 % TSV 2405D (Nominal 24 VDC) 5 VDC 100 mA 72 % TSV 2412D 12 VDC 40 mA 79 % TSV 2415D 15 VDC 30 mA 80 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TSV Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 12 mA / 110 mA typ. 24 Vin models: 7 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reverse voltage protection 0.3 A max. Reflected input ripple current* can be reduced by ext. 1-3.3 F polyester film capacitor Input filter internal capacitor Output Specifications Voltage set accuracy 4 % max. Voltage balance (dual output models, balanced load) 1 % max. Regulation - Input variation 1.2 % / 1% change Vin - Load variation 20 - 100 % 10 % max. Ripple and noise (20 MHz Bandwidth) 75 mV pk-pk max. Temperature coefficient 0.02 %/K Short circuit protection limited 0.5 sec. max. Capacitive load 5 VDC single output models: 5 VDC dual output model: 12/15 VDC single output models: 12/15 VDC dual output models: 33 F max. 10 F max. 4.7 F max. 2.2 F max. General Specifications Temperature ranges - Operating -40C to +85C (no derating) - Case temperature +95C max. - Storage -40C to +105C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTTF (MIL-HDBK-217F, @ +25C, ground benign) >2'000'000 h Isolation voltage (Input/Output, 60 sec.) 3`000 VDC Isolation capacitance (Input/Output) 60 pF typ. Isolation resistance (Input/Output) >10`000 M Ohm (500VDC) Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load 30 % max. Physical Specifications Casing material non conductive FR4 (UL 94V-0 rated) Package weight 2.2 g (0.07 oz) Reflow soldering profile peak temp. 245C (10 sec. max.) 217C for 90 sec. max. Convection reflow solder process is recommended Packaging information www.tracopower.com/overview/tsv All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TSV Series 1 Watt Derating all Models +85C +105C 90 90 80 80 70 70 60 60 50 50 -5.0% /C 40 40 30 30 20 20 10 10 0 Output Power [%] 100 Output Power [%] 100 0 -40 -30 -20 -10 0 10 20 30 40 50 60 Ambient Temperature [C] 70 80 90 100 110 Outline Dimensions 6.5 (0.256) (0.1) (0.1) 5.08 2.54 (0.2) (0.1) 0.25 10 Pins 4 7.0 (0.27) 0.2 M S P 9.2 (0.36) 0.6 11.2 (0.44) (0.024) 22 Plane (0.01) (0.26) 6.7 2.54 2.54 0.25 1.3 (0.05) (0.01) (0.18) 4.7 S Seating 20 18 14 12 8.0 (0.31) Pin-Out Top view 1 3 5 15.24 (0.6) 9 11 1.0 Solder pad 1.8 12.7 (0.50) 2.54 2.54 (0.1) (0.1) 5.08 2.54 (0.2) (0.1) (0.01) (0.04) Pin Single Dual 1 -Vin (GND) -Vin (GND) 3 +Vin (Vcc) +Vin (Vcc) 5 ntc ntc 9 -Vout Common 11 ntc -Vout 12 ntc ntc 14 +Vout +Vout 18 ntc ntc 20 ntc ntc 22 ntc ntc (ntc = not to connect) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitch tolerances: 0.13 (0.005) Case tolerances: 0.25 (0.01) Rev. September 3, 2018 Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Page 3 of 3