UNIVERSAL TUBULAR SENSORS
1.10
¥Wide versatility of optic functions and connections
¥High operating distances for all functions
¥Models with trimmer adjustment and stability LED
¥Rugged and impermeable plastic housing
The S5 series offers the most complete range of plastic tubular M18 photoelectric
sensors.
The most varied optic functions can be chosen amongst the fixed focus or diffuse
proximity models with short, medium or long operating distances reaching 60 cm;
the 4 m retroreflex, 3 m polarised retroreflex and 1 m for detection of transparent
materials; the 12 m through beam and models with optic fibre connection.
Different versions with either axial or radial optics are available. The series offers
connector or cable connection, with 3 wires Vac or Vdc, or with 4 wires Vdc with
complete configuration of the NPN/PNP output and dark/light mode.
A red LED indicating the output status is visible on the bottom side of the sensor.
The versions with trimmer adjustment present also a green LED signalling the
switching stability according to the received signalÕs intensity.
The rugged ABS housing always guarantees IP67 protection.
S5 SERIES
TUB
MULTI-FUNCTION M18 SENSORS
TECHNICAL DATA DETECTION DIAGRAMS
Power supply: ............................................... 10 ... 30 Vdc (d.c. vers.), reverse polarity
protection
15 ... 264 Vac (a.c. vers.)
Consumption: ............................................... 30 mA max. (d.c. vers.)
10 mA max. (a.c. vers.)
Light emission: ............................................. infrared LED 880 nm
red LED 660 nm (B, E1 vers.)
Diffuse proximity operating distance: ........ 1 ... 10 cm (C10 vers.)
1 ... 35 cm (C35 vers.)
1... 60 cm (C60 vers.)
Limited proximity operating distance: ....... 2 ... 15 mm (L2 vers.)
Fixed focus operating distance: ................. 15 mm with 1 mm spot (D15 vers.)
Retroreflex operating distance: .................. 0.1 ... 4 m (on R2)
Polarised retroreflex operating distance: .. 0.1 ... 3 m (on R2)
Retroreflex for transparents op. distance: .0.1 ... 0.8 m (on R2)
Through beam operating distance: ............ 0 ... 12 m
Operating distance with optic fibres: ......... 22 mm proximity (with OF-18-ST)
85 mm through beam (with OF-19-ST)
refer to OF series for other fibres
Setting: .......................................................... sensitivity trimmer
(A, C8, D15, L2, G vers. excluded)
Indicators: ..................................................... red OUTPUT LED
green STABILITY LED (d.c. vers.)
red POWER LED (G vers.)
Output type: .................................................. NPN or PNP configurable (d.c. vers.)
SCR + bridge rectifier (a.c. vers.)
Saturation voltage: ....................................... 2.5 V max. (vers. d.c.)
Output current: ............................................. 150 mA max.(vers. d.c.), short-circuit prot.
100 mA max.(vers. a.c.)
Response time: .............................................1 ms max.
2 ms (F vers. in d.c.)
20 ms max. (c.a. vers.)
Switching frequency: ................................... 500 Hz max.
250 Hz max. (F vers. in d.c.)
25 Hz max. (a.c. vers.)
Operating mode: ...........................................dark/light (configurable in 4 wires d.c. vers.)
Auxiliary functions: ...................................... Ôtest +Õ and Ôtest -Õ inputs (G vers. in c.c.)
Connection: ...................................................4-pole M12 connector
or 2 m ¯ 5 mm cable
Electrical protection: ....................................class 1 (vers. a.c.)
class 2 (vers. d.c.)
Mechanical protection: ................................ IP67
Housing material: ......................................... ABS
Lens material: ............................................... PMMA plastic
Weight: .......................................................... 25 g max. (connector vers.)
100 g max. (cable vers.)
Operating temperature: ............................... -25 ... +55¡C
Storage temperature: ................................... -25 ... +70¡C
Reference standard: .....................................EN 60947-5-2
Certifications: ................................................ ( vers.d.c.)
The operating distances indicate the detection distance with excess gain 2.
S5-x-C60-x
S5-x-C10-x
S5-x-A4-x
S5-x-B3-x
Grey R18% White R90%
R5
R5
R2
R2
White R90%
Grey R18%
S5-x-T1-x
S5-x-F/G-x
S5-x-C35-x
Grey R18%
White R90%
R5
R2
UNI EN ISO9001
UNI EN ISO14000
The detection diagrams indicate the typical
operating distance with excess gain 1.
CONNECTIONS
DIMENSIONS
S5-1-G8 S5-5-x (3 wires) M12 CONNECTOR
S5-5-x (4 wires) S5-5-G8/G12 (4 wires) S5-1-x
mm
HEADQUARTERS
INDUSTRIE ELETTRONICHE SENSOR S.p.A.
via Lavino, 265 - 40050 Monte San Pietro, BO - Italy
Tel. +39-051-6765611 ¥ Fax +39-051-6759324
http://www.sensor.it ¥ e-mail: headquarters@sensor.it
UNIVERSAL TUBULAR SENSORS
MODEL DESCRIPTION CODE N¡
SP-40 fixed support for tubular M18 sensors 95ACC1370
SWING-18 adjustable support for plastic tubular M18 sensors 895000006
Please refer also to Sensor Accessories
AXIAL OPTIC VERSIONS RADIAL OPTIC VERSIONS
4 WIRE CONNECTION
10 - 30 Vdc 4 POLE CABLE M12 CONN. 4 POLE CABLE M12 CONN.
Short distance S5-5-C10-30 S5-5-C10-32 S5-5-C8-35 S5-5-C8-37
diffuse proximity (G5210530) (G5210532) (G5210535) (G5210537)
Medium distance S5-5-C35-30 S5-5-C35-32 S5-5-C30-35 S5-5-C30-37
diffuse proximity (G5210630) (G5210632) (G5210635) (G5210637)
Long distance S5-5-C60-30 S5-5-C60-32 S5-5-C60-35 S5-5-C60-37
diffuse proximity (952051640) (952051650) (952051660) (952051670)
Fixed focus proximity S5-5-D15-30 S5-5-D15-32 S5-5-D15-35 S5-5-D15-37
(G5210430) (G5210432) (G5210435) (G5210437)
Retroreflex S5-5-A4-30 S5-5-A4-32 S5-5-A2-35 S5-5-A2-37
(G5210230) (G5210232) (G5210235) (G5210237)
Polarised S5-5-B3-30 S5-5-B3-32 S5-5-B1,5-35 S5-5-B1,5-37
Retroreflex (G5210730) (G5210732) (G5210735) (G5210737)
Retroreflex for S5-5-T1-30 S5-5-T1-32 - -
transparents (952051680) (952051690)
Through beam receiver S5-5-F12-30 S5-5-F12-32 S5-5-F8-35 S5-5-F8-37
(G5210130) (G5210132) (G5210135) (G5210137)
Through beam emitter S5-5-G12-00 S5-5-G12-02 S5-5-G8-05 S5-5-G8-07
(G5210000) (G5210002) (G5210005) (G5210007)
Fibre optic S5-5-E1-30 S5-5-E1-32 - -
amplifier (G5210830) (G5210832)
3 WIRE CONNECTION
10 - 30 Vdc M12 CONN. - NPN M12 CONN. - PNP M12 CONN. - NPN M12 CONN. - PNP
Diffuse proximity S5-5-C35-72 S5-5-C35-92 S5-5-C30-77 S5-5-C30-97
light mode (G5210672) (G5210692) (G5210677) (G5210697)
Limited proximity S5-5-L2-72 S5-5-L2-92 S5-5-L2-77 S5-5-L2-97
light mode (G5210972) (G5210992) (G5210977) (G5210997)
Retroreflex S5-5-A4-62 S5-5-A4-82 S5-5-A2-67 S5-5-A2-87
dark mode (G5210262) (G5210282) (G5210267) (G5210287)
Retroreflex S5-5-A4-72 S5-5-A4-92 S5-5-A2-77 S5-5-A2-97
light mode (G5210272) (G5210292) (G5210277) (G5210297)
Through beam receiver S5-5-F12-62 S5-5-F12-82 S5-5-F8-67 S5-5-F8-87
dark mode (G5210162) (G5210182) (G5210167) (G5210187)
Through beam emitter use 4 wire 10 - 30 Vdc models use 4 wire 10 - 30 Vdc models
3 WIRE CONNECTION
15 - 264 Vac CABLE - dark mode CABLE - light mode CABLE - dark mode CABLE - light mode
Short distance S5-1-C8-10 S5-1-C8-20 S5-1-C8-15 S5-1-C8-25
diffuse roximity (G5110510) (G5110520) (G5110515) (G5110525)
Medium distance S5-1-C30-10 S5-1-C30-20 S5-1-C30-15 S5-1-C30-25
diffuse proximity (G5110610) (G5110620) (G5110615) (G5110625)
Fixed focus proximity S5-1-D15-10 S5-1-D15-20
(G5110410) (G5110420) --
Retroreflex S5-1-A2-10 S5-1-A2-20 S5-1-A2-15 S5-1-A2-25
(G5110210) (G5110220) (G5110215) (G5110225)
Through beam receiver S5-1-F8-10 S5-1-F8-20 S5-1-F8-15 S5-1-F8-25
(G5110110) (G5110120) (G5110115) (G5110125)
Through beam emitter S5-1-G8-00 S5-1-G8-05
(G5110000) (G5110005)
MODELS
ACCESSORIES
Distributed by:
IES SpA endeavours to continuously improve and renew its products; for this reason the technical
data and contents of this catalogue may undergo variations without prior notice. For correct
installation and use IES SpA can guarantee only the data indicated in the instruction manual supplied
with the products.
9C500110E - Printed in Italy in November 1999
Rev. 00